I/O Product List

I/O Products by Type and Form Factor

I/O TypeForm FactorManufacturer ModelDescriptionNotes
AFDX/ARINCPCIAIMCS-AM-ACPE-FDX-2B EOL - This item is no longer available - See CS-AM-APE-FDX-2B for native PCIe F/F/F replacement AIM ACPE-FDX-2B Dual Port, PCIe x1 bus to AFDX/ ARINC664P7 Interface: Traffic Simulator, Receiver and Chronological Monitor. IRIG-B Time Decoder, 64MB Global RAM, 64MB ASP RAM. Includes Boeing Specific EDE Extensions (AIM p/n ACPE-FDX-2B)
 PCIAIMCS-AM-APE-FDX-2AIM APE-FDX-2 Dual Channel AFDX/ARINC 664 Dual Port PCIe x1 Device. (This is the AIM AMC-FDX-2 mounted on a PCIe x1 carrier) (AIM p/n APE-FDX-2)
 PCIAIMCS-AM-APE-FDX-2BAIM APE-FDX-2B 2 Port, Native PCIe 2.0 (x1) bus to 10/100/1000Mbit/s AFDX®/ARINC664P7 Interface: Traffic Simulator, Receiver and Chronological Monitor. IRIG-B Time Decoder, 64MB Global RAM, 64MB ASP RAM. Includes Boeing Specific EDE Extensions (AIM p/n APE-FDX-2B)
ARINC 429PCIeDDCCS-DD-400K-060-3L0DD-40000K060R-3L0: PCIe ARINC 429/717 6 Channels that can be individually programmed for Transmit/Receive functionality with parametric test features, variable output voltage, and voltage monitoring on board. 0°C to +71°C, PCIe x1 Rev 1.1 compliant. Front I/O. ( Breakout cable is highly recommended - cable p/n CS-DD-78149-1)
 PCIeDDCCS-DD-400K-180-3L0DD-40000K180R-3L0: PCIe ARINC 429/717 18 Channels that can be individually programmed for Transmit/Receive functionality with parametric test features, variable output voltage, and voltage monitoring on board. 0°C to +71°C, PCIe x1 Rev 1.1 compliant. Front I/O. ( Breakout cable is highly recommended - cable p/n CS-DD-78149-1)
 PCIeDDCCS-DD-400K-360-3L0DD-40000K360R-3L0: PCIe ARINC 429/717 36 Channels that can be individually programmed for Transmit/Receive functionality with parametric test features, variable output voltage, and voltage monitoring on board. 0°C to +71°C, PCIe x1 Rev 1.1 compliant. Front I/O. ( Breakout cable is highly recommended - cable p/n CS-DD-78149-1)
 PCIeDDCCS-DD-78149-1ARINC 429 Cable for the CS-DD-400Kx ARINC 429 boards. Length 22". Single Honda HDRA-E100M1+ 100 pin connector to two D Style AMP 1658641-1 50 pin (male) connectors (DDC P/N DDC 78149-1)Supported by RedHawk and SimWB.
 PCIeDDCCS-DD-78149-2ARINC 429 Cable for the CS-DD-401x ARINC 429 boards. Length 22". Single Honda HDRA-E100M1+ 100 pin connector to two D Style AMP 1658641-1 50 pin (male) connectors (DDC P/N DDC 78149-2)Supported by RedHawk and SimWB.
 PCIDDCCS-DD-401I-060-JL0DD-40100I060R-JL0: PCI ARINC 429/717 6 Channels that can be individually programmed for Transmit/Receive functionality with parametric test features, variable output voltage, and voltage monitoring on board. 0°C to +55°C, PCI 32-bit, 33/66MHz PCI Local Bus Rev. 2.2 compliant. Front I/O. ( Breakout cable is highly recommended - cable p/n CS-DD-78149-2)
 PCIDDCCS-DD-401I-180-JL0DD-40100I180R-JL0: PCI ARINC 429/717 18 Channels that can be individually programmed for Transmit/Receive functionality with parametric test features, variable output voltage, and voltage monitoring on board. 0°C to +55°C, PCI 32-bit, 33/66MHz PCI Local Bus Rev. 2.2 compliant. Front I/O. ( Breakout cable is highly recommended - cable p/n CS-DD-78149-2)
 PCIDDCCS-DD-401I-360-JL0DD-40100I360R-JL0: PCI ARINC 429/717 36 Channels that can be individually programmed for Transmit/Receive functionality with parametric test features, variable output voltage, and voltage monitoring on board. 0°C to +55°C, PCI 32-bit, 33/66MHz PCI Local Bus Rev. 2.2 compliant. Front I/O. ( Breakout cable is highly recommended - cable p/n CS-DD-78149-2)
 PMCDDCCS-DD-401F-060-3L0DD-40100F060R-3L0: PMC ARINC 429/717 6 Channels that can be individually programmed for Transmit/Receive functionality with parametric test features, variable output voltage, and voltage monitoring on board. 0°C to +71°C, PCI 32-bit, 33/66MHz PCI Local Bus Rev. 2.2 compliant. Front I/O. ( Breakout cable is highly recommended - cable p/n CS-DD-78149-2)
 PMCDDCCS-DD-401F-180-3L0DD-40100F180R-3L0: PMC ARINC 429/717 18 Channels that can be individually programmed for Transmit/Receive functionality with parametric test features, variable output voltage, and voltage monitoring on board. 0°C to +71°C, PCI 32-bit, 33/66MHz PCI Local Bus Rev. 2.2 compliant. Front I/O. ( Breakout cable is highly recommended - cable p/n CS-DD-78149-2)
 PMCDDCCS-DD-401F-360-3L0DD-40100F360R-3L0: PMC ARINC 429/717 36 Channels that can be individually programmed for Transmit/Receive functionality with parametric test features, variable output voltage, and voltage monitoring on board. 0°C to +71°C, PCI 32-bit, 33/66MHz PCI Local Bus Rev. 2.2 compliant. Front I/O. ( Breakout cable is highly recommended - cable p/n CS-DD-78149-2)
Analog InputPCIeConcurrentCP-AD3224-DS32-channel, 24-bit Delta-Sigma PCIe analog input card with up to 216 KSPS sample rate per channel. Supported by RedHawk and SimWB
 PCIeConcurrentCP-AD3224-DS-1032-channel, 24-bit Delta-Sigma PCIe analog input card with up to 216 KSPS sample rate per channel. Supported by RedHawk and SimWB
 PCIeConcurrentCP-ADS641864-channel, 18-bit, high-performance 10-volt SAR PCIe analog input card up to 1.4 MSPS sample rate per channel.

Supported by RedHawk and SimWB
 PCIeGeneral StdsCS-GS-16AI32CLL-TSPCIe66-16AI32SSC-32-50M-TS-0-LL - PCIe Device 16-Bit - 32 Differential only Ch. A/D 200KSPS 16-bit ADC per Channel, 50.000M Clock Frequency, low-latency (provides 32 data registers that duplicate the most recent data written to the buffer), D32/D64 Universal PCI, Bi-polar Polar 2.5V, 5V & 10V - GS P/N PCIe66-16AI32SSC-32-50M-TS-0-LL. (This is a PMC device on a PCIe Carrier) Board Connector: Standard 80-pin 0.050" dual-ribbon socket connector: Robinson Nugent P50E-080S-TGNOT Supported by SimWB or RedHawk at this time. Will require RIQ for SWB Support..
 PCIeGeneral StdsCS-GS-16AI64LL-2-EPCIe 16-Bit - 32(Diff)/64(SE) Ch. A/D; Customized version of the GS-16AI64 device to provide Low-Latency analog input. Single ADC per Board, therefore 500k Conversions per second is only obtainable when sampling a single channel. This board is optimized for Hardware-in-the-Loop applications and not pure data aquisition. This is a PMC adapter mounted on a PCIe carrier. GS P/N PCIe-16AI64LL-2. Conector - 68-pin 0.050" Subminiature connector: Robinson Nugent #P50-068-STG or equivalent.Supported by RedHawk and SimWB.
 PCIeGeneral StdsCS-GS-16AI64LL-S3EPCIe 16-Bit - 32(Diff)/64(SE) Ch. A/D; Customized version of the GS-16AI64 device to provide Low-Latency analog input. Single ADC per Board, therefore 500k Conversions per second is only obtainable when sampling a single channel. This board is optimized for Hardware-in-the-Loop applications and not pure data aquisition. This is a PMC adapter mounted on a PCIe carrier. GS P/N PCIe-16AI64LL-2-SCSI-3. Connector 68-pin AMP SCSI-3 0.050" Subminiature connector.Supported by RedHawk and SimWB.
 PCIeGeneral StdsCS-GS-16AI64SSC-EPCIe-16AI64SSC-64-50M-0-0 - PCIE Device 16-Bit - 32(Diff)/64(SE) Ch. A/D 200KSPS 16-bit ADC per Channel, Simultaneous Sampling of all inputs, D32/D64, Bi-polar/Uni Polar 2.5V, 5V & 10V, Clock Freq. 50.000M - This card is a true PCIe x1 form-factor. GS P/N PCIe-16AI64SSC-64-50M-0-0. Board Connector: Standard 80-pin 0.050" dual-ribbon socket, Robinson Nugent P50E-080S-TG or equivalent. Supported by RedHawk and SimWB.
 PCIeGeneral StdsCS-GS-16AI64SSC-ELPCIe-16AI64SSC-64-50M-0-LL (Low Latency) - PCIE Device 16-Bit - 32(Diff)/64(SE) Ch. A/D 200KSPS 16-bit ADC per Channel, Simultaneous Sampling of all inputs, D32/D64, Bi-polar/Uni Polar 2.5V, 5V & 10V, Clock Freq. 50.000M - Low Latency - This card is a true PCIe x1 form-factor. GS P/N PCIe-16AI64SSC-64-50M-0-LL. Board Connector: Standard 80-pin 0.050" dual-ribbon socket, Robinson Nugent P50E-080S-TG or equivalent. Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AI64LL-2PCI 16-Bit - 32(Diff)/64(SE) Ch. A/D; Customized version of the GS-16AI64 device to provide Low-Latency analog input. Single ADC per Board, therefore 500k Conversions per second is only obtainable when sampling a single channel. This board is optimized for Hardware-in-the-Loop applications and not pure data aquisition. This is a PMC adapter mounted on a PCI carrier. GS P/N PCI-16AI64LL-2. Conector - 68-pin 0.050" Subminiature connector: Robinson Nugent #P50-068-STG or equivalent.Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AI64LL-S3PCI 16-Bit - 32(Diff)/64(SE) Ch. A/D; Customized version of the GS-16AI64 device to provide Low-Latency analog input. Single ADC per Board, therefore 500k Conversions per second is only obtainable when sampling a single channel. This board is optimized for Hardware-in-the-Loop applications and not pure data aquisition. This is a PMC adapter mounted on a PCI carrier. GS P/N PCI-16AI64LL-2-SCSI-3. Connector 68-pin AMP SCSI-3 0.050" Subminiature connector. Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16SDIHS-616-bit, Six (6) Channel Sigma-Delta Analog Input PMC Board With 1.1 MSPS Sample Rate per Channel, and Two Independent Clocks (General Standards P/N - PCIE-16SDIHS-6)Not supported by SWB at this time. RIQ required if SWB support is needed.
 PCIGeneral StdsCS-GS-24DSI12-4-SF4-channel, Lowpass Filter Frequencies: Standard 40kHz and 270kHz, PLL Rate Generator)l (General Standards P/N - PCI-24DSI12-4-SF-S-PLL)
 PCIGeneral StdsCS-GS-24DSI12-8-SF8-channel, Lowpass Filter Frequencies: Standard 40kHz and 270kHz, PLL Rate Generator)l (General Standards P/N - PCI-24DSI12-8-SF-S-PLL)
 PCIGeneral StdsCS-GS-24DSI12-SF12-channel, Lowpass Filter Frequencies: Standard 40kHz and 270kHz, PLL Rate Generator)l (General Standards P/N - PCI-24DSI12-12-SF-S-PLL)
 PCIGeneral StdsCS-GS-24DSI32-SD32-Channel 24-Bit Delta-Sigma PCI Analog Input Board With 200 KSPS Sample Rate per Channel, Standard Low Distortion, Image Filter Standard 40kHz and 270kHz, PLL Rate Generator (General Standards P/N - PCI-24DSI32-32-SD-0-PL25)
 PCI-XGeneral StdsCS-GS-16AI64SSCPCI66-16AI64SSC-64-50M - PCI-X Device 16-Bit - 32(Diff)/64(SE) Ch. A/D 200KSPS 16-bit ADC per Channel, 50.000M Clock Frequency, Simultaneous Sampling of all inputs, D32/D64 Universal PCI, Bi-polar/Uni Polar 2.5V, 5V & 10V - This card is PMC device on a PCI-X carrier. GS P/N PCI66-16AI64SSC-64-50M. Board Connector: Standard 80-pin 0.050" dual-ribbon socket, Robinson Nugent P50E-080S-TG or equivalent. Supported by RedHawk and SimWB.
 CableGeneral StdsCS-GS-C3-64SS-B16D3 foot Cable w/ 32 BNC Connectors for the CS-GS-16AI64SSCx adapter. (CABLE03-PCI-16AI64SSC-DF-BNC-32) Differential Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.This cable is valid with both 64SSA and 64SSC versions of analog input device adapters.
 CableGeneral StdsCS-GS-C3-64SS-B16S3 foot Cable w/ 16 BNC Connectors for the CS-GS-16AI64SSCx adapter. (CABLE03-PCI-16AI64SSC-SE-BNC-16) Single Ended Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.This cable is valid with both 64SSA and 64SSC versions of analog input device adapters.
 CableGeneral StdsCS-GS-C3-64SS-B32D3 foot Cable w/ 64 BNC Connectors for the CS-GS-16AI64SSCx adapter. (CABLE03-PCI-16AI64SSC-DF-BNC-64) Differential Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.This cable is valid with both 64SSA and 64SSC versions of analog input device adapters.
 CableGeneral StdsCS-GS-C3-64SS-B32S3 foot Cable w/ 32 BNC Connectors for the CS-GS-16AI64SSCx adapter. (CABLE03-PCI-16AI64SSC-SE-BNC-32) Single Ended Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.This cable is valid with both 64SSA and 64SSC versions of analog input device adapters.
 CableGeneral StdsCS-GS-C3-64SS-B64S3 foot Cable w/ 64 BNC Connectors for the CS-GS-16AI64SSCx adapter. (CABLE03-PCI-16AI64SSC-SE-BNC-64) Single Ended Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.This cable is valid with both 64SSA and 64SSC versions of analog input device adapters.
 CableGeneral StdsCS-GS-C6-64SS-B16D6 foot Cable w/ 32 BNC Connectors for the CS-GS-16AI64SSCx adapter. (CABLE03-PCI-16AI64SSC-DF-BNC-32) Differential Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.This cable is valid with both 64SSA and 64SSC versions of analog input device adapters.
 CableGeneral StdsCS-GS-C6-64SS-B16S6 foot Cable w/ 16 BNC Connectors for the CS-GS-16AI64SSCx adapter. (CABLE6-PCI-16AI64SSC-SE-BNC-16) Single Ended Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.This cable is valid with both 64SSA and 64SSC versions of analog input device adapters.
 CableGeneral StdsCS-GS-C6-64SS-B32D6 foot Cable w/ 64 BNC Connectors for the CS-GS-16AI64SSCx adapter. (CABLE6-PCI-16AI64SSC-DF-BNC-64) Differential Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.This cable is valid with both 64SSA and 64SSC versions of analog input device adapters.
 CableGeneral StdsCS-GS-C6-64SS-B32S6 foot Cable w/ 32 BNC Connectors for the CS-GS-16AI64SSCx adapter. (CABLE6-PCI-16AI64SSC-SE-BNC-32) Single Ended Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.This cable is valid with both 64SSA and 64SSC versions of analog input device adapters.
 CableGeneral StdsCS-GS-C6-64SS-B64S6 foot Cable w/ 64 BNC Connectors for the CS-GS-16AI64SSCx adapter. (CABLE6-PCI-16AI64SSC-SE-BNC-64) Single Ended Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.This cable is valid with both 64SSA and 64SSC versions of analog input device adapters.
 CableGeneral StdsCS-GS-C9-64SS-B16D9 foot Cable w/ 16 BNC Connectors for the CS-GS-16AI64SSC (CABLE09-PCI-16AI64SSC-DF-BNC-16) Differential Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.
 CableGeneral StdsCS-GS-C9-64SS-B16S9 foot Cable w/ 16 BNC Connectors for the CS-GS-16AI64SSC (CABLE09-PCI-16AI64SSC-SE-BNC-16) Single Ended Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.
 CableGeneral StdsCS-GS-C9-64SS-B32D9 foot Cable w/ 32 BNC Connectors for the CS-GS-16AI64SSC (CABLE09-PCI-16AI64SSC-DF-BNC-32) Differential Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.
 CableGeneral StdsCS-GS-C9-64SS-B32S9 foot Cable w/ 32 BNC Connectors for the CS-GS-16AI64SSC (CABLE09-PCI-16AI64SSC-SE-BNC-32) Single Ended Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.
 CableGeneral StdsCS-GS-CSH06-16AI64 6 foot Cable Shielded for the CS-GS-16AI64 & CS-GS-16AI64LL (p/n CABLE6SH-16AI64-W2)
 CableGeneral StdsCS-GS-CSH06-16SDI6 foot Cable Shielded for the CS-GS-16SDIx (p/n CABLE6SH-16SDI-W2)
 CableGeneral StdsCS-GS-CSH06-64SSC6 foot Cable Shielded for the CS-GS-16AI64SSC (p/n CABLE6SH-16AI64SSC-W2)
 CableGeneral StdsCS-GS-CSH09-16AI649 foot Cable Shielded for the CS-GS-16AI64 & CS-GS-16AI64LL (p/n CABLE9SH-16AI64-W2)
 CableGeneral StdsCS-GS-CSH09-16SDI9 foot Cable Shielded for the CS-GS-16SDIx (p/n CABLE9SH-16SDI-W2)
 CableGeneral StdsCS-GS-CSH09-64SSC9 foot Cable Shielded for the CS-GS-16AI64SSC (p/n CABLE9SH-16AI64SSC-W2)
 CableGeneral StdsCS-GS-CSH12-16AI6412 foot Cable Shielded for the CS-GS-16AI64 & CS-GS-16AI64LL (p/n CABLE12SH-16AI64LL-W2)
 CableGeneral StdsCS-GS-CSH12-16SDI12 foot Cable Shielded for the CS-GS-16SDIx (p/n CABLE12SH-16SDI-W2)
 CableGeneral StdsCS-GS-CSH12-64SSC12 foot Cable Shielded for the CS-GS-16AI64SSC (p/n CABLE12SH-16AI64SSC-W2)
 CableUEICS-UEI-PD-CONN-NIConverts 100-way NI A/D Cable to PowerDAQ 96-way analog/37-way digital for the CS-UEI-PD2-DIO128i (PD-CONN-NI)
 AccessoryGeneral StdsCS-GS-BOX-B64SS-6464 BNC Rackmount BOX for PCI/PCIe 16AI64SSX devices - General Standards p/n BOX-BNC-PCI66-16AI64SSA-64This panel will work with both the CS-GS-16AI64SSA and CS-GS-16AI64SSC family of analog input adpaters.
 AccessoryGeneral StdsCS-GS-IM-16AI64LLCable Interface Module for the CS-GS-16AI64LL-2. Transitions between high density connectors and high quality spring loaded terminal block. Modules are 2.88" in width (length varies depending on part number) so they can be mounted in standard DIN rail fixtures. Terminal blocks accept 18 - 26 AWG wire.
 AccessoryGeneral StdsCS-GS-IM-16AI64LL1Cable Interface Module for the CS-GS-16AI64LL-2. Transitions between high density connectors and screw clamp terminal blocks. Modules are 2.88" in width (length varies depending on part number) so they can be mounted in standard DIN rail fixtures. Terminal blocks accept 18 - 26 AWG wire. (Vendor p/n CBLIFMOD-PCI-16AI64LL-1)
 AccessoryGeneral StdsCS-GS-IM-16AI64SSCable Interface Module for the CS-GS-16AI64SSCx. Transitions between high density connectors and high quality spring loaded terminal blocks. Modules are 2.88" in width (length varies depending on part number) so they can be mounted in standard DIN rail fixtures. Terminal blocks accept 18 - 26 AWG wire.
 AccessoryGeneral StdsCS-GS-IM-16AI64SS0Cable Interface Module for the CS-GS-16AI64SSCx. Transitions between high density connectors and Screw Clamp Terminals terminal blocks. Modules are 2.88" in width (length varies depending on part number) so they can be mounted in standard DIN rail fixtures. Terminal blocks accept 18 - 26 AWG wire. (GS p/n CBLIFMOD-PCIE-16AI64SSC-1)
 AccessoryGeneral StdsCS-GS-IM-16AI64SS1Cable Interface Module - DIN Mount w/ Screw Clamp Terminals for the CS-GS-16AI64SSCx boards. Transitions between high density connectors and high quality screw terminal blocks. Modules are 2.88" in width (length varies depending on part number) so they can be mounted in standard DIN rail fixtures. Terminal blocks accept 18 - 26 AWG wire. (GS p/n CBLIFMOD-PCI-16AI64SSC-E-1-1
 AccessoryGeneral StdsCS-GS-IM-16SDICable Interface Module for the CS-GS-16SDIx. Transitions between high density connectors and high quality spring loaded terminal blocks. Modules are 2.88" in width (length varies depending on part number) so they can be mounted in standard DIN rail fixtures. Terminal blocks accept 18 - 26 AWG wire.
 AccessoryGeneral StdsCS-GS-IM-24DSICable Interface Module for the CS-GS-24DSIx. Transitions between high density connectors and high quality spring loaded terminal blocks. Modules are 2.88" in width (length varies depending on part number) so they can be mounted in standard DIN rail fixtures. Terminal blocks accept 18 - 26 AWG wire.
Analog MultifunctionPCIeConcurrentCP-ENG-SIMThe Engine Sensor Simulation card is a customized version of Concurrent’s programmable FPGA card designed especially for HIL ECU testing. The card and its associated firmware can support two and four-cycle engines with up to sixteen cylinders and four independent, variable-phase camshafts. Engine speeds up to 30,000 rpm with .001 rpm resolution can be simulated along with crank reverse rotation (idling stop). The card is supported by Concurrent’s Simulation Workbench (SimWB), a comprehensive framework for developing and executing real-time HIL simulations. (Cables: CX-CBL-HSI-F-0n; Breakout module CX-CBL-AIO-BRKF)

Supported by RedHawk and SimWB
 PCIeConcurrentCP-FPGA-2Concurrent's CP-FPGA-2 programmable FPGA PCIe card features a powerful field-programmable gate array with 362K logic elements that supports both digital and analog I/O. The card can control up to 96 digital I/O signals along with 16 analog inputs and 16 analog outputs. The programmable FPGA card features isolated I/O power, high-speed digital isolators and multi-board synchronization. Optional NIST traceable calibration is available for the analog section.

Supported by RedHawk and SimWB
 PCIeConcurrentCP-FPGA-3Concurrent's CP-FPGA-3 programmable FPGA PCIe card features a powerful field-programmable gate array with 504K logic elements that supports both digital and analog I/O. The card can control up to 96 digital I/O signals along with 16 analog inputs and 16 analog outputs. The programmable FPGA card features isolated I/O power, high-speed digital isolators and multi-board synchronization. Optional NIST traceable calibration is available for the analog section.

Supported by RedHawk and SimWB
 PCIeConcurrentCP-MFIOConcurrent’s Multifunction I/O PCIe card can control up to 96 digital I/O signals along with 16 analog inputs and 16 analog outputs. The card features isolated I/O power, high-speed digital isolators and multi-board synchronization. Optional NIST traceable calibration is available for the analog section. A RedHawk™ Linux® driver with extensive API including DMA and interrupts is available for both 32-bit and 64-bit architectures. (Cables: CX-CBL-HSI-F-0n; Breakout module CX-CBL-AIO-BRKF)

Supported by RedHawk and SimWB
 PCIeGeneral StdsCS-GS-16AIO-41E16-Bit - 32(SE)/16(D) Ch. A/D; 4Ch. D/A; 16-Bit DIO (General Standards PCIe-16AIO-41-00 - PMC device mounted on PCIe carrier) Bi-Polar; 68-Pin 2-row 0.050" dual-ribbon cable socket connector: Robinson Nugent #P50E-068-S-TGSupported by RedHawk and SimWB.
 PCIeGeneral StdsCS-GS-16AIO-41E-S316-Bit - 32(SE)/16(D) Ch. A/D; 4Ch. D/A; 16-Bit DIO (General Standards PCIe-16AIO-41-0-SCSI3 - PMC device mounted on PCIe carrier) Bi-Polar; 68-pin AMP SCSI-3 0.050" Subminiature connector with metal shieldSupported by RedHawk and SimWB.
 PCIeGeneral StdsCS-GS-ADADIO-311ePCIe x1 Form Factor - 16-Bit - +/-10V 8 Ch. A/D, 4Ch. D/A, No Output Filter , 8-bit DIO (100Khz) (May be delivered as a PMC device on a PCI/PMC Carrier by General Standards)
 PCIeGeneral StdsCS-GS-ADADIO-312ePCIe x1 Form Factor - 16-Bit - +/- 10V 8 Ch. A/D; 4Ch. D/A, No Output Filter; 8-bit DIO (200Khz) (May be delivered as a PMC device on a PCI/PMC Carrier by General Standards)
 PCIAcromagCS-ACRO-APC730PCI Multi-Function I/O: Analog In: 16 differential or 32 single-ended inputs (±3.3V, ±5V, ±10V, 0-5V, and 0-10V ranges) 16-bit ADC with 512 sample RAM; Analog Out: Eight analog output channels (±10V range), Individual 16-bit DACs per channel, 1024 sample FIFO for waveform generation; Digital I/O:16 TTL bidirectional input/outputs; Counter/Timer: One 32-bit counter/timer. Acromag P/N APC730
 PCIAcromagCS-ACRO-APC730MPMC730 Multi-Function I/O: Analog In: 16 differential or 32 single-ended inputs (±3.3V, ±5V, ±10V, 0-5V, and 0-10V ranges) 16-bit ADC with 512 sample RAM; Analog Out: Eight analog output channels (±10V range), Individual 16-bit DACs per channel, 1024 sample FIFO for waveform generation; Digital I/O:16 TTL bidirectional input/outputs; Counter/Timer: One 32-bit counter/timer. Acromag P/N PMC730
 PCIAcromagCS-ACRO-APC8620PCI Carrier Card for 5 IP Modules (requires 5V PCI slot) (THIS BOARD IS NO LONGER AVAILABLE AND IS REPLACED BY THE CS-ACRO-APC8620A Model)Driver support only for the IP330/IP480-2/IP480-6/IP520-64/IP-231/IP341/IP408/IP501. If different IP modules are required, please contact salesman for quotation.
 PCIAcromagCS-ACRO-APC8620APCI bus(PC)carrier board, non-intelligent PCI bus IP carrier, holds 5 IPack modules (full length); plug-and-play carrier configuration and interrupt support, standard IP module interface, supports two interrupt channels per IP, accepts other manufactures' IP modules, temeratures 0 to 70°C. Vendor P/N APC8620ADriver support only for the IP330/IP480-2/IP480-6/IP520-64/IP-231/IP341/IP408/IP501. If different IP modules are required, please contact salesman for quotation.
 PCIAcromagCS-ACRO-APC8621APCI bus(PC)carrier board, non-intelligent PCI bus IP carrier, holds 3 IPack modules (half length); plug-and-play carrier configuration and interrupt support, standard IP module interface, supports two interrupt channels per IP, accepts other manufactures' IP modules, temperatures 0 to 70°C. Vendor P/N APC8621ADriver support only for the IP330/IP480-2/IP480-6/IP520-64/IP-231/IP341/IP408/IP501. If different IP modules are required, please contact salesman for quotation.
 PCIAcromagCS-ACRO-APCE8650Non-intelligent PCI Express bus IP carrier board, holds 4 IP modules (full length), This board interfaces standard Industry Pack (IP) mezzanine modules to a PCI Express bus on a PC-based computer system.accepts other manufactures' IP modules, temeratures 0 to 70°C. Vendor P/N APCE8650Driver support only for the IP330/IP480-2/IP480-6/IP520-64/IP-231/IP341/IP408/IP501. If different IP modules are required, please contact salesman for quotation.
 PCIAcromagCS-ACRO-APCE8670Non-intelligent carrier card. One PMC module slot 4-lane PCI Express interface, PCI-X interface supports 32/64-bit addressing, 32/64-bit data bus at up to 100MHz operation. Carrier routes 32 differential pairs to rear connector for LVDS I/O from the PMC module, JTAG connector supports Xilinx programmer for use with hosted FPGA modules, Cooling fan, Auxilliary power connection for 12V source, Diagnostic LEDs indicate communication speedVendor P/N APCE8670Driver support only for the IP330/IP480-2/IP480-6/IP520-64/IP-231/IP341/IP408/IP501. If different IP modules are required, please contact salesman for quotation.
 PCIAcromagCS-ACRO-IP230A-8Acromag IP230A-8 Analog Output Module, 8 voltage output channels Individual D/A converters on each channel, 10µS settling time Selectable output range (±5V, ±10V, 0-10V) IP230A modules have a 16-bit D/A converter (DAC) to provide highly-accurate analog voltage outputs. Acromag p/n IP230A-8Requires purchase of Acromag IP Carrier Board
 PCIAcromagCS-ACRO-IP231-16Acromag IP231-16 Analog Output Module, 16-bit D/A. 16 Voltage Output Channels. Acromag p/n IP231-16Requires purchase of Acromag IP Carrier Board
 PCIAcromagCS-ACRO-IP330AAnalog input module with 16 differential or 32 single-ended inputs with 16-bit A/D, (200KHz throughput). Vendor P/N IP330A. Note: This replaces CS-ACRO-IP330 which has been discontinued by Acromag. Requires purchase of Acromag IP Carrier Board
 PCIAcromagCS-ACRO-IP341Analog input module with 16 differential inputs (8 simultaneous sample & hold conversions), 14-bit A/D, 125KHz throughput. Vendor P/N IP341Requires purchase of Acromag IP Carrier Board
 PCIAcromagCS-ACRO-IP408Digital input/output module with 32 bi-directional digital input and/or output channels, 0-60V DC input and output range, low-side output switches, outputs sink up to 1A per channel, change-of-state and level interrupts (up to 8 channels). Vendor P/N IP408Requires purchase of Acromag IP Carrier Board
 PCIAcromagCS-ACRO-IP409IP409: Digital Input/Output Module, Differential I/O - 24 digital input and/or output channels, Output channels support readback monitoring, Socketed termination resistors, Ruggedized RS-422A/485 transceivers, Interrupt support on all channels, - Change-of-state, High or low level transition, Positive and negative current limiting, Parallel I/O for up to 24 bits, 0 to 70°CVendor P/N IP409Requires purchase of Acromag IP Carrier Board
 PCIAcromagCS-ACRO-IP470AIP470A: Digital Output Module, TTL Level, 48 bi-directional input/output channels, TTL-compatible inputs, CMOS-compatible open-drain outputs, Interrupt support for each channel Vendor P/N IP470ARequires purchase of Acromag IP Carrier Board
 PCIAcromagCS-ACRO-IP480-2Counter/Timer module with 2 16-bit (1 32-bit) counter/timers, output waveform generator, continuous pulse, single pulse, continuous square waveforms, pulse-width or periodic rate monitor, watchdog timer with isolated relay output, interrupt support. Vendor P/N IP480-2Requires purchase of Acromag IP Carrier Board
 PCIAcromagCS-ACRO-IP480-6Counter/Timer module with 6 16-bit (3 32-bit) counter/timers, output waveform generator, continuous pulse, single pulse, continuous square waveforms, pulse-width or periodic rate monitor, watchdog timer with isolated relay output, interrupt support. Vendor P/N IP480-6Requires purchase of Acromag IP Carrier Board
 PCIAcromagCS-ACRO-IP501-128Non-isolated communication module with four EIA/TIA-422B/485 serial ports (full-duplex EIA-485), 128-byte FIFO buffers. Vendor P/N IP501-128Requires purchase of Acromag IP Carrier Board
 PCIAcromagCS-ACRO-IP520-64Non-isolated communication module with eight EIA/TIA-232E ports, 64-byte FIFO buffers. Vendor P/N IP520-64Requires purchase of Acromag IP Carrier Board
 PCIGeneral StdsCS-GS-16AIO-4116-Bit - 32(SE)/16(D) Ch. A/D; 4Ch. D/A; 16-Bit DIO (General Standards PCI-16AIO-41-00 - PMC device mounted on PCI carrier) Bi-Polar; 68-Pin 2-row 0.050" dual-ribbon cable socket connector: Robinson Nugent #P50E-068-S-TGSupported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AIO-41-S316-Bit - 32(SE)/16(D) Ch. A/D; 4Ch. D/A; 16-Bit DIO (General Standards PCI-16AIO-41-0-SCSI3 - PMC device mounted on PCI carrier) Bi-Polar; 68-pin AMP SCSI-3 0.050" Subminiature connector with metal shieldSupported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-66-16AI8AO0PCI66-16AISS8AO4-8-0 -40.32M 16-Bit, 12-Channel, 2-MSPS PCI Analog Input/Output Board With Eight Simultaneously Sampled Analog Inputs, Zero (0) Analog Outputs, Input Sampling Rates to 2.0 MSPS per channel. (Note - General Standards does not provide a cost break for this device without the Analog Output Channels at this time)
 PCIGeneral StdsCS-GS-66-16AI8AO4PCI66-16AISS8AO4-8-4 -40.32M 16-Bit, 12-Channel, 2-MSPS PCI Analog Input/Output Board With Eight Simultaneously Sampled Analog Inputs, Four Analog Outputs, Input Sampling Rates to 2.0 MSPS per channel, and Simultaneous Output Clocking Rates to 1.0 MSPS per Channel
 PCIGeneral StdsCS-GS-66-16AI8AO4EPCIe66-16AISS8AO4-8-4 -40.32M 16-Bit, 12-Channel, 2-MSPS PCIe Analog Input/Output Board With Eight Simultaneously Sampled Analog Inputs, Four Analog Outputs, Input Sampling Rates to 2.0 MSPS per channel, and Simultaneous Output Clocking Rates to 1.0 MSPS per Channel
 PCIGeneral StdsCS-GS-ADADIO-232PCI Form Factor - 16-Bit - +/- 5V 8 Ch. A/D, 4Ch. D/A, 4KHz Output Filter , 8-bit DIO (200Khz) (May be delivered as a PMC device on a PCI/PMC Carrier by General Standards)
 PCIGeneral StdsCS-GS-ADADIO-232ePCI Form Factor - 16-Bit - +/- 5V 8 Ch. A/D, 4Ch. D/A, 4KHz Output Filter , 8-bit DIO (200Khz) (May be delivered as a PMC device on a PCI/PMC Carrier by General Standards)
 PCIGeneral StdsCS-GS-ADADIO-311PCI Form Factor - 16-Bit - +/-10V 8 Ch. A/D, 4Ch. D/A, No Output Filter , 8-bit DIO (100Khz) (May be delivered as a PMC device on a PCI/PMC Carrier by General Standards)
 PCIGeneral StdsCS-GS-ADADIO-312PCI Form Factor - 16-Bit - +/- 10V 8 Ch. A/D; 4Ch. D/A, No Output Filter; 8-bit DIO (200Khz) (May be delivered as a PMC device on a PCI/PMC Carrier by General Standards)
 PCIGeneral StdsCS-GS-DIN-RAILDIN Rail enclosure for General Standards Interface Modules Only. Please indicate for which Interface Module this will be used for. (GS Part Number: DIN-RAIL-XXXX, XXXX=IM Type)Must specify Interface Module Type being used with this DIN Rail enclosure when ordering
 PCIUEICS-UEI-PD2-MF163H333 kS/s, 16-bit, 16SE/8DI A/D, gains: 1,2,4,8; two 12-bit D/As; 3 counter/timers; 32 digital I/O PCI multifunction board. 5V PCI SLOT REQUIRED. (PD2-MF-16-333/16H)Not recommended for use with SimWB due to library overhead. (CS-GS-16AOxx is recommended for SimWB). Third-party Vendor Library provided w/o enhancements or bug fixes. Customer to determine accessories appropriate for their application and external equipment.
 PCIUEICS-UEI-PD2-MF163L333 kS/s, 16-bit, 16SE/8DI A/D, gains: 1,10,100,1000; two 12-bit D/As; 3 counter/timers; 32 digital I/O PCI multifunction board. 5V PCI SLOT REQUIRED. (PD2-MF-16-333/16L)Not recommended for use with SimWB due to library overhead. (CS-GS-16AOxx is recommended for SimWB). Third-party Vendor Library provided w/o enhancements or bug fixes. Customer to determine accessories appropriate for their application and external equipment.
 PCIUEICS-UEI-PD2-MFS4300300 kS/s, 16-bit, 4SE simultaneous sample & hold; two 12-bit D/As; 3 counter/timers; 32 digital I/O simultaneous sampling PCI multifunction board. 5V PCI SLOT REQUIRED. (PD2-MFS-4-300/16)Not recommended for use with SimWB due to library overhead. (CS-GS-16AOxx is recommended for SimWB). Third-party Vendor Library provided w/o enhancements or bug fixes. Customer to determine accessories appropriate for their application and external equipment.
 PMCGeneral StdsCS-GS-16AIO-PMC-S3PMC device w/ SCSI3 68-pin connectors: 16-Bit - 32(SE)/16(D) Ch. A/D; 4Ch. D/A; 16-Bit DIO (General Standards True PMC device PMC-16AIO-41-0-SCSI3.) 68-pin 0.050" Subminiature connector with metal shieldSupported by RedHawk and SimWB.
 CableAcromagCS-ACRO-5028-432Shielded Cable for the CS-ACRO-APC730 PCI device. SCSI-3 68-pin connector. Vendor P/N 5028-432
 CableGeneral StdsCS-GS-C06-PCIe-PMC 6 foot Cable Non-Shielded for the for the PCIe1-PCM Adapter. Used to support PMC devices with Rear I/O that are mounted on a PCIe1-to-PMC Adapter. This cable has a 68 pin Robinson Nugent connector on both ends. GS p/n CBL6-PCIe1-PMC.
 CableGeneral StdsCS-GS-C9-16AIO-B049 foot Cable w/ 4 Single Ended BNC Connectors for the CS-GS-16AIO-41 and CS-GS-16AIO-41E device. (CABLE9-PCI-16AIO-SE-BNC-4) NOTE: This is a non-standard cable and cannot be used with the standard Interface Modules CS-GS-IM-16AIO-X model numbers. Please inform Concurrent what signals you need BNC connectors for before placing an order.
 CableGeneral StdsCS-GS-CS06-SIO425P12 foot Cable Shielded w/ DB25 Male Connectors for the CS-GS-SIO4B & CS-GS-SIO4BX Sync Serial Controllers with 3ft 22AWG wire attached at both ends. (GS p/n: CABLE06SH-SIO4B-STD3-DB25P-W2)
 CableGeneral StdsCS-GS-CS12-SIO425P12 foot Cable Shielded w/ DB25 Male Connectors for the CS-GS-SIO4B & CS-GS-SIO4BX Sync Serial Controllers with 3ft 22AWG wire attached at both ends. (GS p/n: CABLE12SH-SIO4B-STD3-DB25P-W2)
 CableGeneral StdsCS-GS-CS9-SIO425P9 foot Cable Shielded w/ DB25 Male Connectors for the CS-GS-SIO4B & CS-GS-SIO4BX Sync Serial Controllers with 3ft 22AWG wire attached at both ends. (GS p/n: CABLE9SH-SIO4B-STD3-DB25P-W2)
 CableGeneral StdsCS-GS-CSH06-16AIO 6 foot Cable Shielded for the CS-GS-16AIOx (p/n CABLE6SH-16AIO-W2)
 CableGeneral StdsCS-GS-CSH06-ADIO6 foot Cable Shielded for the CS-GS-ADADIOx (p/n CABLE6SH-ADADIO-W2)
 CableGeneral StdsCS-GS-CSH09-16AIO9 foot Cable Shielded for the CS-GS-16AIOx (p/n CABLE9SH-16AIO-W2)
 CableGeneral StdsCS-GS-CSH09-ADIO9 foot Cable Shielded for the CS-GS-ADADIOx (p/n CABLE9SH-ADADIO-W2)
 CableGeneral StdsCS-GS-CSH12-16AIO12 foot Cable Shielded for the CS-GS-16AIOx (p/n CABLE12SH-16AIO-W2)
 CableGeneral StdsCS-GS-CSH12-ADIO12 foot Cable Shielded for the CS-GS-ADADIOx (p/n CABLE12SH-ADADIO-W2)
 CableNICS-NI-182762-01R1005050-01 (p/n 182762-01) 1-meter Unsheilded Ribbon Cable for the CS-NI-PCI-DIO-96, CS-NI-PCIE-6509 or CS-NI-PCI-6509 and is terminated with two 50-pin IDC connectors.
 CableNICS-NI-182762-02R1005050-02 (p/n 182762-02) 2-meter Unsheilded Ribbon Cable for the CS-NI-PCI-DIO-96, CS-NI-PCIE-6509 or CS-NI-PCI-6509 and is terminated with two 50-pin IDC connectors.
 CableNICS-NI-183432-01SH-68-68-D1 1-meter Shielded Cable for the CS-NI-PCI-6704, CS-NI-PCI-6703 and CS-NI-PCI-6602Accessory forCS-NI- PCI-6704, CS-NI-PCI-6703, CS-NI-PCI-6602
 CableNICS-NI-185095-02SH100-100-F 2-meter Shielded Cable for the CS-NI-PCI-DIO-96, CS-NI-PCI-6509, CS-NI-PCIE-6509PCI-DIO-96
 CableNICS-NI-192061-01SHC68-68-EPM Shielded Cable, 68 D-Type to 68 VHDCI Offset, 1m. This is an enhanced performance Cable for the CS-NI-PCI-6704, CS-NI-PCI-6703 and CS-NI-PCI-6602 devices. It can be used in place of the CS-NI-183432-01 (SH-68-68-D1).
 CableNICS-NI-192061-02SHC68-68-EPM Shielded Cable, 68 D-Type to 68 VHDCI Offset, 2m. This is an enhanced performance Cable for the CS-NI-PCI-6704, CS-NI-PCI-6703 and CS-NI-PCI-6602 devices. It can be used in place of the CS-NI-183432-01 (SH-68-68-D1).
 AccessoryAcromagCS-ACRO-5025-288Termination Panel for the CS-ACRO-APC730 PCI device. DIN Rail Mount, 68 screw terminals, SCSI-3 connector Cable not included. Vendor P/N 5025-288.
 AccessoryAcromagCS-ACRO-5025-511-1Custom Length (1 Foot) Flat Cable, shielded, 50-pin connector at both ends for the CS-ACRO-APCE8650. Vendor P/N 5025-511-1
 AccessoryAcromagCS-ACRO-5025-551 Flat Cable, shielded, 50-pin connector at both ends for the CS-ACRO-APCE8650. Vendor P/N 5025-551-10
 AccessoryAcromagCS-ACRO-5025-552 Termination panel, DIN rail-mount, 50 screw terminals, ribbon Cable connector for the CS-ACRO-APCE8650.Vendor P/N 5025-5025-552
 AccessoryGeneral StdsCS-GS-IM-16AIOCable Interface Module for the CS-GS-16AIOx. Transitions between high density connectors and high quality spring loaded terminal blocks. Modules are 2.88" in width (length varies depending on part number) so they can be mounted in standard DIN rail fixtures. Terminal blocks accept 18 - 26 AWG wire. (GS p/n CBLIFMOD-PCI-16AIO)
 AccessoryGeneral StdsCS-GS-IM-16AIO-1-1Cable Interface Module - DIN Mount w/ Screw Clamp Terminals for the CS-GS-16AIOx. Transitions between high density connectors and high quality screw terminal blocks. Modules are 2.88" in width (length varies depending on part number) so they can be mounted in standard DIN rail fixtures. Terminal blocks accept 18 - 26 AWG wire. (GS p/n CBLIFMOD-PCI-16AIO-1-1)
 AccessoryGeneral StdsCS-GS-IM-ADADIOCable Interface Module for the CS-GS-ADADIOx. Transitions between high density connectors and high quality spring loaded terminal blocks. Modules are 2.88" in width (length varies depending on part number) so they can be mounted in standard DIN rail fixtures. Terminal blocks accept 18 - 26 AWG wire.
 AccessoryNICS-NI-776844-01Connector Block for the SCB-68 Shielded Cable CS-NI-PCI-6704, CS-NI-PCI-6703 and CS-NI-PCI-6602
 AccessoryNICS-NI-776990-01Connector Block for the SCB-100 Shielded Cable CS-NI-PCI-6509 and CS-NI-PCIE-6509Accessory for CS-NI-PCI-6025E & CS-NI-PCI-6071E
 AccessoryNICS-NI-777141-01Connector Block for the TBX-68 Unshielded Cable, with DIN-Rail Mounting for the CS-NI-PCI-6704, CS-NI-PCI-6703 and CS-NI-PCI-6602
 AccessoryNICS-NI-777145-01CB-68LP Unshielded, low cost I/O Connector Block for the CS-NI-PCI-6704, CS-NI-PCI-6703 and CS-NI-PCI-6602
 AccessoryNICS-NI-777812-01CB-100 I/O Kit includes two CB-50 I/O Connector Blocks and a R1005050 ribbon cable for direct connection for the CS-NI-PCI-DIO-96, CS-NI-PCI-6509, or CS-NI-PCIE-6509 devices. Includes hardware for DIN-rail or panel mounting.Accessory for CS-NI-PCI-DIO-96 & CS-NI-PCI-6509
 AccessoryNICS-NI-782536-01SCB-68A Noise Rejecting, Shielded I/O Connector BlockAccessory Shielded I/O connector block for 68-pin NI X, M, E, B, S, and R Series DAQ devices
Analog OutputPCIeConcurrentCP-DA0818-DDifferential 8-channel, 18-bit analog output PCIe card with 400K updates per second using LTC2758 dual channel DACs.Supported by RedHawk and SimWB
 PCIeConcurrentCP-DA0818-SSingle-ended 8-channel, 18-bit analog output PCIe card with 400K updates per second using LTC2758 dual channel DACs.Supported by RedHawk and SimWB
 PCIeConcurrentCP-DA3218-DDifferential 32-channel, 18-bit analog output PCIe card with 400K updates per second using LTC2758 dual channel DACs.Supported by RedHawk and SimWB
 PCIeConcurrentCP-DA3218-SSingle-ended 32-channel, 18-bit analog output PCIe card with 400K updates per second using LTC2758 dual channel DACs.Supported by RedHawk and SimWB
 PCIeConcurrentCP-UEGO-4The 4-channel Universal Exhaust Gas Oxygen (UEGO) sensor simulator PCIe card simulates narrow-band or wide-band Lambda probes, heater temperature (resistive) feedback and heater PWM monitoring. Galvanic isolation is provided on each channel pair. Open, ground and voltage fault insertion is available on all probe lines. PCIe full-height, 9.5" long. (Cables: CX-CBL-HSI-68-xx; Breakout module CX-CBL-AIO-BRKF)

Supported by RedHawk and SimWB
 PCIeGeneral StdsCS-GS-16AO16-0811E8-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking -True Form Factor PCIe x1 Support, No Output Filters, Differential Outputs (GS p/n PCIE-16AO16-8-F0-DF)Supported by RedHawk and SimWB.
 PCIeGeneral StdsCS-GS-16AO16-0812E8-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking -True Form Factor PCIe x1 Support, No Output Filters, Single Ended Outputs (GS p/n PCIe-16AO16-8-F0-SE)Supported by RedHawk and SimWB.
 PCIeGeneral StdsCS-GS-16AO16-1211E12-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - True Form Factor PCIe x1 Support No Output Filters, Differential Outputs (GS p/n PCIe-16AO16-12-F0-DF)Supported by RedHawk and SimWB.
 PCIeGeneral StdsCS-GS-16AO16-1212E12-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - True Form Factor PCIe x1 Support No Output Filters, Single Ended Outputs (GS p/n PCIe-16AO16-12-F0-SE)Supported by RedHawk and SimWB.
 PCIeGeneral StdsCS-GS-16AO16-1611E16-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCIe - No Output Filters, Differential Outputs (GS p/n PCIe-16AO16-16-F0-DF) Supported by RedHawk and SimWB.
 PCIeGeneral StdsCS-GS-16AO16-1612E16-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCIe - No Output Filters, Single Ended Outputs (GS p/n PCIe-16AO16-16-F0-SE)Supported by RedHawk and SimWB.
 PCIeGeneral StdsCS-GS-16AO16-1621E16-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCIe - 10kHz Output Filters, Differential Outputs (GS p/n PCIe-16AO16-16-F10-DF)Supported by RedHawk and SimWB.
 PCIeGeneral StdsCS-GS-16AO16-1622E16-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCIe -10kHz Output Filters, Single Ended Outputs (GS p/n PCIe-16AO16-16-F10-SE)Supported by RedHawk and SimWB.
 PCIeGeneral StdsCS-GS-16AO16-1631E16-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCIe - 100kHz Output Filters, Differential Outputs (GS p/n PCIe-16AO16-16-F100-DF) Supported by RedHawk and SimWB.
 PCIeGeneral StdsCS-GS-16AO16-1632E16-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCIe - 100kHz Output Filters, Single Ended Outputs (GS p/n PCIe-16AO16-16-F100-SE)Supported by RedHawk and SimWB.
 PCIeGeneral StdsCS-GS-16AO64-32DBE PCIe 32-Channels Differential, 16-Bit High-Speed Analog Output Board w/ 500,000 samples per second per channel. Bi-Polar 10V, 5V, or 0-5V, No Filters, Output Disconnect. PCIe x1 adapter. (GS p/n PCIe-16AO64C-32D-BP-F1-49.152M-OD-0)Not supported by SWB at this time. RIQ required if SWB support is needed.
 PCIeGeneral StdsCS-GS-16AO64-32SBEPCIe 32-Channels Single Ended 16-Bit High-Speed Analog Output Board w/ 500,000 samples per second per channel. Bi-Polar 10V, 5V, or 0-5V, No Filters, Output Disconnect. PCIe x1 adapter. (GS p/n PCIe-16AO64C-32S-BP-F1-49.152M-OD-0)Not supported by SWB at this time. RIQ required if SWB support is needed.
 PCIeGeneral StdsCS-GS-16AO64-64SBE PCIe 64-Channels Single Ended, 16-Bit High-Speed Analog Output Board w/ 500,000 samples per second per channel. Bi-Polar 10V, 5V, or 0-5V, No Filters, Output Disconnect. PCIe x1 adapter. (GS p/n PCIe-16AO64C-64S-BP-F1-49.152M-OD-0)Not supported by SWB at this time. RIQ required if SWB support is needed.
 PCIGeneral StdsCS-GS-16AO16-08118-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support, No Output Filters, Differential Outputs (GS p/n PCI66-16AO16-8-F0-DF)Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AO16-08128-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support, No Output Filters, Single Ended Outputs (GS p/n PCI66-16AO16-8-F0-SE)Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AO16-08218-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support, 10kHz Output Filters, Differential Outputs (GS p/n PCI66-16AO16-8-F10-DF)Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AO16-08228-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support, 10kHz Output Filters, Single Ended Outputs (GS p/n PCI66-16AO16-8-F10-SE)Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AO16-08318-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support, 100kHz Output Filters, Differential Outputs (GS p/n PCI66-16AO16-8-F100-DF)Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AO16-08328-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support, 100kHz Output Filters, Single Ended Outputs (GS p/n PCI66-16AO16-8-F100-SE)Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AO16-121112-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support No Output Filters, Differential Outputs (GS p/n PCI66-16AO16-12-F0-DF)Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AO16-121212-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support No Output Filters, Single Ended Outputs (GS p/n PCI66-16AO16-12-F0-SE)Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AO16-122112-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support 10kHz Output Filters, Differential Outputs (GS p/n PCI66-16AO16-12-F10-DF)Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AO16-122212-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support 10kHz Output Filters, Single Ended Outputs (GS p/n PCI66-16AO16-12-F10-SE)Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AO16-123112-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support 100kHz Output Filters, Differential Outputs (GS p/n PCI66-16AO16-12-F100-DF)Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AO16-123212-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support 100kHz Output Filters, Single Ended Outputs (GS p/n PCI66-16AO16-12-F100-SE)Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AO16-161116-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support No Output Filters, Differential Outputs (GS p/n PCI66-16AO16-16-F0-DF) Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AO16-161216-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support No Output Filters, Single Ended Outputs (GS p/n PCI66-16AO16-16-F0-SE)Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AO16-162116-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support 10kHz Output Filters, Differential Outputs (GS p/n PCI66-16AO16-16-F10-DF)Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AO16-162216-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support 10kHz Output Filters, Single Ended Outputs (GS p/n PCI66-16AO16-16-F10-SE)Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AO16-163116-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support 100kHz Output Filters, Differential Outputs (GS p/n PCI66-16AO16-16-F100-DF) Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-16AO16-163216-Channel 16-Bit High-Speed Analog Output Board w/ 400,000 Samples per Second per Channel, and Simultaneous Clocking - PCI 66MHz Support 100kHz Output Filters, Single Ended Outputs (GS p/n PCI66-16AO16-16-F100-SE)Supported by RedHawk and SimWB.
 PCIGeneral StdsCS-GS-66-16AO121CSPCI66-16AO16-FLV-12-F1-HC-S Analog Output: +-(2.5,1.5) V High Current output range, 12 single-ended output channels (2 wire), 256K FIFO buffer, software selectable Elliptic output filter, 33/66MHz PCI interface, 5PPM precision oscillator;
 PCIGeneral StdsCS-GS-66-16AO121LDPCI66-16AO16-FLV-12-F1-HL-D Analog Output: +-(5, 10) V High Level output range, 12 Channel Differential (3-wire), 256K FIFO buffer, software selectable Elliptic output filter, 33/66MHz PCI interface, 5PPM precision oscillator;
 PCIGeneral StdsCS-GS-66-16AO122CSPCI66-16AO16-FLV-12-F2-HC-S Analog Output: +-(2.5,1.5) V High Current output range, 12 single-ended output channels (2 wire), 256K FIFO buffer, software selectable Butterworth output filter, 33/66MHz PCI interface, 5PPM precision oscillator;
 PCIGeneral StdsCS-GS-66-16AO122LDPCI66-16AO16-FLV-12-F2-HL-D Analog Output: +-(5, 10) V High Level output range, 12 Channel Differential (3-wire), 256K FIFO buffer, software selectable Butterworth output filter, 33/66MHz PCI interface, 5PPM precision oscillator;
 PCIGeneral StdsCS-GS-66-16AO123CSPCI66-16AO16-FLV-12-F3-HC-S Analog Output: +-(2.5,1.5) V High Current output range, 12 single-ended output channels (2 wire), 256K FIFO buffer, software selectable Elliptic output filter, 33/66MHz PCI interface, 5PPM precision oscillator;
 PCIGeneral StdsCS-GS-66-16AO123LDPCI66-16AO16-FLV-12-F3-HL-D Analog Output: +-(5, 10) V High Level output range, 12 Channel Differential (3-wire), 256K FIFO buffer, software selectable Elliptic output filter, 33/66MHz PCI interface, 5PPM precision oscillator;
 PCIGeneral StdsCS-GS-66-16AO161CSPCI66-16AO16-FLV-16-F1-HC-S Analog Output: +-(2.5,1.5) V High Current output range, 16 single-ended output channels (2 wire), 256K FIFO buffer, software selectable Elliptic output filter, 33/66MHz PCI interface, 5PPM precision oscillator;
 PCIGeneral StdsCS-GS-66-16AO161LDPCI66-16AO16-FLV-16-F1-HL-D Analog Output: +-(5, 10) V High Level output range, 16 Channel Differential (3-wire), 256K FIFO buffer, software selectable Elliptic output filter, 33/66MHz PCI interface, 5PPM precision oscillator;
 PCIGeneral StdsCS-GS-66-16AO161LSPCI66-16AO16-FLV-16-F1-HL-S Analog Output: +-(5, 10) V High Level output range, 16 Channel Single ended (2-wire), 256K FIFO buffer, software selectable Elliptic output filter, 33/66MHz PCI interface, 5PPM precision oscillator;
 PCIGeneral StdsCS-GS-66-16AO162CSPCI66-16AO16-FLV-16-F2-HC-S Analog Output: +-(2.5,1.5) V High Current output range, 16 single-ended output channels (2 wire), 256K FIFO buffer, software selectable Butterworth output filter, 33/66MHz PCI interface, 5PPM precision oscillator;
 PCIGeneral StdsCS-GS-66-16AO162LDPCI66-16AO16-FLV-16-F2-HL-D Analog Output: +-(5, 10) V High Level output range, 16 Channel Differential (3-wire), 256K FIFO buffer, software selectable Butterworth output filter, 33/66MHz PCI interface, 5PPM precision oscillator;
 PCIGeneral StdsCS-GS-66-16AO163CSPCI66-16AO16-FLV-16-F3-HC-S Analog Output: +-(2.5,1.5) V High Current output range, 16 single-ended output channels (2 wire), 256K FIFO buffer, software selectable Elliptic output filter, 33/66MHz PCI interface, 5PPM precision oscillator;
 PCIGeneral StdsCS-GS-66-16AO163LDPCI66-16AO16-FLV-16-F3-HL-D Analog Output: +-(5, 10) V High Level output range, 16 Channel Differential (3-wire), 256K FIFO buffer, software selectable Elliptic output filter, 33/66MHz PCI interface, 5PPM precision oscillator;
 PCINICS-NI-PCI-670316-line Static Analog Voltage Outputs -- 16-Bit. --- (This device requires purchase of SWB and applicable license - RedHawk driver is not available.) Available PCI slot location is required. RedHawk Linux Driver is not available for this device. Device supported only via SimWB.
 PCINICS-NI-PCI-670416-line Static Analog Voltage & Current Outputs -- 16-Bit (This device requires purchase of SWB and applicable license - RedHawk driver is not available.) Available PCI slot location is required. RedHawk Linux Driver is not available for this device. Device supported only via SimWB.
 PCIUEICS-UEI-PD2-AO088-channel analog output data acquisition card. 16-bit resolution, 100 kS/s per channel update rate, three 24-bit counter/timers, 16 digital I/O lines. 5V PCI SLOT REQUIRED. (PD2-AO-8/16)Not recommended for use with SimWB due to library overhead. (CS-GS-16AOxx is recommended for SimWB). Third-party Vendor Library provided w/o enhancements or bug fixes. Customer to determine accessories appropriate for their application and external equipment.
 PCIUEICS-UEI-PD2-AO1616-channel analog output data acquisition card. 16-bit resolution, 100 kS/s per channel update rate, three 24-bit counter/timers, 16 digital I/O lines.5V PCI SLOT REQUIRED. (PD2-AO-16/16)Not recommended for use with SimWB due to library overhead. (CS-GS-16AOxx is recommended for SimWB). Third-party Vendor Library provided w/o enhancements or bug fixes. Customer to determine accessories appropriate for their application and external equipment.
 PCIUEICS-UEI-PD2-AO3232-channel analog output data acquisition card. 16-bit resolution, 100 kS/s per channel update rate, three 24-bit counter/timers, 16 digital I/O lines. 5V PCI SLOT REQUIRED. (PD2-AO-32/16)Not recommended for use with SimWB due to library overhead. (CS-GS-16AOxx is recommended for SimWB). Third-party Vendor Library provided w/o enhancements or bug fixes. Customer to determine accessories appropriate for their application and external equipment.
 PCIUEICS-UEI-PD2-AO32HC32-channel high-current analog output data acquisition card. 16-bit resolution, 100 kS/s per channel update rate, three 24-bit counter/timers, 16 digital I/O lines. 5V PCI SLOT REQUIRED. (PD2-AO-32/16HC)Not recommended for use with SimWB due to library overhead. (CS-GS-16AOxx is recommended for SimWB). Third-party Vendor Library provided w/o enhancements or bug fixes. Customer to determine accessories appropriate for their application and external equipment.
 PCIUEICS-UEI-PD2-AO32HS32-channel high-speed analog output data acquisition card. 16-bit resolution, 9.6 MS/s aggregate update rate from DSP memory, 100 kS/s per channel update rate, three 24-bit counter/timers, 16 digital I/O lines. 5V PCI SLOT REQUIRED. (PD2-AO-32/16HS)Not recommended for use with SimWB due to library overhead. (CS-GS-16AOxx is recommended for SimWB). Third-party Vendor Library provided w/o enhancements or bug fixes. Customer to determine accessories appropriate for their application and external equipment.
 PCIUEICS-UEI-PD2-AO9696-channel analog output data acquisition card. 16-bit resolution, 100 kS/s per channel update rate, three 24-bit counter/timers, 16 digital I/O lines.5V PCI SLOT REQUIRED. (PD2-AO-96/16A)Not recommended for use with SimWB due to library overhead. (CS-GS-16AOxx is recommended for SimWB). Third-party Vendor Library provided w/o enhancements or bug fixes. Customer to determine accessories appropriate for their application and external equipment.
 PCIUEICS-UEI-PD2-AO96HS96-channel high-speed analog output data acquisition card. 16-bit resolution, 6.4 MS/s aggregate update rate from DSP memory, 100 kS/s per channel update rate, three 24-bit counter/timers, 16 digital I/O lines. 5V PCI SLOT REQUIRED. (PD2-AO-96/16HS)Not recommended for use with SimWB due to library overhead. (CS-GS-16AOxx is recommended for SimWB). Third-party Vendor Library provided w/o enhancements or bug fixes. Customer to determine accessories appropriate for their application and external equipment.
 VMEGECS-VMIC-4132-01112-bit 32-channel Analog Output VME Board (Minimum Order Quantity 10 Required)
 CableGeneral StdsCS-GS-C06-SCSI-3 6 foot Cable for the CS-GS-16AI64LL-S3, CS-GS-16AI64LL-S3E, CS-GS-16AIO-41-S3, CS-GS-16AIO-41E-S3, CS-GS-16AIO-PMC-S3. All boards with SCSI-3 68-pin AMP SCSI-3 0.050" Subminiature connector with metal shield. (GS P/N - Based on I/O device ordered. Example only - CBL6-PCIe-16AIO-41-SCSI-3)
 CableGeneral StdsCS-GS-C12-SCSI-3 12 foot Cable for the CS-GS-16AI64LL-S3, CS-GS-16AI64LL-S3E, CS-GS-16AIO-41-S3, CS-GS-16AIO-41E-S3, CS-GS-16AIO-PMC-S3. Use with all boards with SCSI-3 68-pin AMP SCSI-3 0.050" Subminiature connector with metal shield. (GS P/N - Based on I/O device ordered. Example only - CBL12-PCIe-16AIO-41-SCSI-3)
 CableGeneral StdsCS-GS-C3-16AO-B08D3 foot Cable w/ 8 BNC Connectors for the CS-GS-16AOx (x=12 or 16) Differential device configurations (CABLE3-PCI-16AO16-DF-BNC-08) Please inform Concurrent what signals you need BNC connectors for before placing an order.
 CableGeneral StdsCS-GS-C3-16AO-B08S3 foot Cable w/ 8 BNC Connectors for the CS-GS-16AOx (x=12 or 16) Single Ended device configurations (CABLE3-PCI-16AO16-SE-BNC-08) Please inform Concurrent what signals you need BNC connectors for before placing an order.
 CableGeneral StdsCS-GS-C3-16AO-B12D3 foot Cable w/ 12BNC Connectors for the CS-GS-16AOx (x=12 or 16) Differential device configurations (CABLE3-PCI-16AO16-DF-BNC-12) Please inform Concurrent what signals you need BNC connectors for before placing an order.
 CableGeneral StdsCS-GS-C3-16AO-B12S3 foot Cable w/ 12 BNC Connectors for the CS-GS-16AOx (x=12 or 16) Single Ended device configurations (CABLE3-PCI-16AO16-SE-BNC-12) Please inform Concurrent what signals you need BNC connectors for before placing an order.
 CableGeneral StdsCS-GS-C3-16AO-B16D3 foot Cable w/ 16 BNC Connectors for the CS-GS-16AOx (x=12 or 16) Differential device configurations (CABLE3-PCI-16AO16-DF-BNC-16) Please inform Concurrent what signals you need BNC connectors for before placing an order.
 CableGeneral StdsCS-GS-C3-16AO-B16S3 foot Cable w/ 16 BNC Connectors for the CS-GS-16AOx (x=12 or 16) Single Ended device configurations (CABLE3-PCI-16AO16-SE-BNC-16)
 CableGeneral StdsCS-GS-C3-SCSI-3 3 foot Cable for the CS-GS-16AI64LL-S3, CS-GS-16AI64LL-S3E, CS-GS-16AIO-41-S3, CS-GS-16AIO-41E-S3, CS-GS-16AIO-PMC-S3. Use with all boards with SCSI-3 68-pin AMP SCSI-3 0.050" Subminiature connector with metal shield. (GS P/N - Based on I/O device ordered. Example only - CBL3-PCIe-16AIO-41-SCSI-3)
 CableGeneral StdsCS-GS-C6-16AO16-DF6 foot Cable Connectors for the CS-GS-16AO16 Differential device configurations (CABLE6-PCI-16AO16-DF)
 CableGeneral StdsCS-GS-C6-16AO16-SE6 foot Cable Connectors for the CS-GS-16AO16 Single Ended device configurations (CABLE6-PCI-16AO16-SE)
 CableGeneral StdsCS-GS-C9-16AO-B08D9 foot Cable w/ 8 BNC Connectors for the CS-GS-16AOx (x=12 or 16) (CABLE3-PCI-16AO16-DF-BNC-08) Differential Cable
 CableGeneral StdsCS-GS-C9-16AO-B08S9 foot Cable w/ 8 BNC Connectors for the CS-GS-16AOx (x=12 or 16) (CABLE3-PCI-16AO16-SE-BNC-08) Single Ended Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.
 CableGeneral StdsCS-GS-C9-16AO-B12D9 foot Cable w/ 12 BNC Connectors for the CS-GS-16AOx (x=12 or 16) (CABLE3-PCI-16AO16-DF-BNC-12) Differential Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.
 CableGeneral StdsCS-GS-C9-16AO-B12S9 foot Cable w/ 12 BNC Connectors for the CS-GS-16AOx (x=12 or 16) (CABLE3-PCI-16AO16-SE-BNC-12) Single Ended Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.
 CableGeneral StdsCS-GS-C9-16AO-B16D9 foot Cable w/ 16 BNC Connectors for the CS-GS-16AOx (x=12 or 16) (CABLE3-PCI-16AO16-DF-BNC-16) Differential Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.
 CableGeneral StdsCS-GS-C9-16AO-B16S9 foot Cable w/ 16 BNC Connectors for the CS-GS-16AOx (x=12 or 16) (CABLE3-PCI-16AO16-SE-BNC-16) Single Ended Cable. Please inform Concurrent what signals you need BNC connectors for before placing an order.
 CableGeneral StdsCS-GS-C9-16AO16-DF9 foot Cable Connectors for the CS-GS-16AO16 Differential device configurations (CABLE9-PCI-16AO16-DF)
 CableGeneral StdsCS-GS-C9-16AO16-SE9 foot Cable Connectors for the CS-GS-16AO16 Single Ended device configurations (CABLE9-PCI-16AO16-SE)
 CableGeneral StdsCS-GS-CS6-16A0643D 6 foot Cable for the CS-GS-16AO64-32DBE 32 Channel, 16 Bit Differential Analog Output adapter ( GS Cable p/n CABLE6-PCIe-16AO64C-32D-BP-F1-49.152M-OD-0)
 CableGeneral StdsCS-GS-CS6-16A0643S 6 foot Cable for the CS-GS-16AO64-32SBE 32 Channel, 16 Bit Single Ended Analog Output adapter ( GS Cable p/n CABLE6-PCIe-16AO64C-32S-BP-F1-49.152M-OD-0)
 CableGeneral StdsCS-GS-CS6-16A0646S 6 foot Cable for the CS-GS-16AO64-64SBE 64 Channel, 16 Bit Single Ended Analog Output adapter ( GS Cable p/n CABLE6-PCIe-16AO64C-64S-BP-F1-49.152M-OD-0)
 CableGeneral StdsCS-GS-CSH-16A0643D 6 foot Cable Shielded for the CS-GS-16AO64-32DBE 32 Channel, 16 Bit Differential Analog Output adapter ( GS Cable p/n CABLE6SH-PCIe-16AO64C-32D-BP-F1-49.152M-OD-0-W2)
 CableGeneral StdsCS-GS-CSH-16A0643S 6 foot Cable Shielded for the CS-GS-16AO64-32SBE 32 Channel, 16 Bit Single Ended Analog Output adapter ( GS Cable p/n CABLE6SH-PCIe-16AO64C-32S-BP-F1-49.152M-OD-0-W2)
 CableGeneral StdsCS-GS-CSH-16A0646S 6 foot Cable Shielded for the CS-GS-16AO64-64SBE 64 Channel, 16 Bit Single Ended Analog Output adapter ( GS Cable p/n CABLE6SH-PCIe-16AO64C-64S-BP-F1-49.152M-OD-0-W2)
 CableGeneral StdsCS-GS-CSH06-16AO6 foot Cable Shielded for the CS-GS-16AOx and CS-GS-66-16AO16x series cards. (p/n CABLE6SH-16AO-W2)
 CableGeneral StdsCS-GS-CSH09-16AO9 foot Cable Shielded for the CS-GS-16AOx and CS-GS-66-16AO16x series cards. (p/n CABLE9SH-16AO-W2)
 CableGeneral StdsCS-GS-CSH12-16AO12 foot Cable Shielded for the CS-GS-16AOx and CS-GS-66-16AO16x series cards. (p/n CABLE12SH-16AO-W2)
 CableUEICS-UEI-PD2-AOCBL376ft, 37-way ribbon Cable for the CS-UEI-PD2-AOx. with mounting bracket and internal cable. This digital I/O cable set includes a 37-way internal ribbon cable with mounting bracket and a 37-way external ribbon Cable. Use this set to connect from 36-pin digital connector on any PowerDAQ AO board to any accessory with 37-pin digital connector. (PD-CBL-37-6FT)Customer to determine which accessories are appropriate to meet their application and external equipment requirements.
 CableUEICS-UEI-PD2-AOCBL966ft, 96-way ribbon Cable for the CS-UEI-PD2-AOx with mounting bracket and internal cable. 96-way pinless, round shielded cable with metal cover plates. Use this cable to connect a PowerDAQ AO series board to any accessories with 96-way connector. It includes two Fujitsu FCN-247J096-G/E connectors (PD-CBL-96-6FT)Customer to determine which accessories are appropriate to meet their application and external equipment requirements.
 AccessoryGeneral StdsCS-GS-IM-16AO16Cable Interface Module for the CS-GS-16AO16x and CS-GS-66-16AO16x. Transitions between high density connectors and high quality spring loaded terminal blocks. Modules are 2.88" in width (length varies depending on part number) so they can be mounted in standard DIN rail fixtures. Terminal blocks accept 18 - 26 AWG wire.
 AccessoryGeneral StdsCS-GS-IM-16AO16-1Cable Interface Module for the CS-GS-16AO16x and CS-GS-66-16AO16x. Transitions between high density connectors and screw clamp terminal blocks. Modules are 2.88" in width (length varies depending on part number) so they can be mounted in standard DIN rail fixtures. Terminal blocks accept 18 - 26 AWG wire. (Vendor p/n CBLIFMOD-PCI-16AO16-I)
 AccessoryGeneral StdsCS-GS-IM-16AO16-S3Cable Interface Module for the CS-GS-16AO16x-SCSI-3 and CS-GS-66-16AO16x-SCSI-3. Transitions between high density connectors and screw clamp terminal blocks. Modules are 2.88" in width (length varies depending on part number) so they can be mounted in standard DIN rail fixtures. Terminal blocks accept 18 - 26 AWG wire. (Vendor p/n CBLIFMOD-PCIe-16AIO-41-SCSI-3 )
 AccessoryUEICS-UEI-PD2-AOSTP16The PD2-AO-STP-16 is a 16-channel screw terminal panel for the CS-UEI-PD2-AOx that includes connections to the counter/timers, high-speed interrupt/synchronization lines, both analog and digital terminals and allows you to connect analog output and sense lines directly at the screw terminals. Cable not included.Customer to determine which accessories are appropriate to meet their application and external equipment requirements.
 AccessoryUEICS-UEI-PD2-AOSTP32The PD2-AO-STP-32 is a 32-channel screw terminal panel for the CS-UEI-PD2-AOx that includes connections to the counter/timers, high-speed interrupt/synchronization lines, both analog and digital terminals and allows you to connect analog output and sense lines directly at the screw terminals. Cable not included.Not recommended for use with SimWB due to library overhead. (CS-GS-16AOxx is recommended for SimWB). Third-party Vendor Library provided w/o enhancements or bug fixes. Customer to determine accessories appropriate for their application and external equipment.
CANbusPCIeConcurrentCP-CAN-402-2E2-channel PCIe x1 CAN bus interface compliant with ISO 11898-2. Electrically isolated. Supports bit rates up to 1 Mbits/sec bus. Supports bus mastering and local data management by FPGA, and selectable CAN termination on-board. Provides two DSUB-9 male connectors.

Supported by RedHawk and SimWB
 PCIeConcurrentCP-CAN-402-B4E4-channel PCIe x1 CAN bus interface compliant with ISO 11898-2. Electrically isolated. Supports bit rates up to 1 Mbits/sec bus. Supports bus mastering and local data management by FPGA, and selectable CAN termination onboard Provides one DSUB-37 to quad DSUB-9 male connector cable. (.5m length)

Supported by RedHawk and SimWB
 PCIeESDCS-ES-CAN-400-2EESD CAN-PCIe/400-2 The CAN-PCIe/400 is a PCIe board that features two CAN High-Speed interfaces acc. to ISO 11898-2. 2x DSUB-9 Male Board Connectors (p/n C.2043.04)Available for 32-bit systems and 64-bit systems.

A RIQ is required if this device is to be used in conjunction with a different ESD Series CAN device in the same system.

 PCIeESDCS-ES-CAN-400-2P EOL - This item is no longer available - See CS-ES-CAN-402-2 for similar device and API ESD CAN-PCI/400-2 The CAN-PCI/400 is a PCI board that features two CAN High-Speed interfaces acc. to ISO 11898-2. 2x DSUB-9 Male Board Connectors (p/n C.2048.04)Available for 32-bit systems and 64-bit systems.

A RIQ is required if this device is to be used in conjunction with a different ESD Series CAN device in the same system.

 PCIeESDCS-ES-CAN-400-4EESD CAN-PCIe/400-4 The CAN-PCIe/400 is a (2 I/O Slot ) PCIe board designed for the PCI Express bus that features four (CAN-PCIe/400-4) CAN High-Speed interfaces acc. to ISO 11898-2. CAN-PCIe/400-4 comes with two CAN interfaces via a separate slot bracket. A second Rear I/O position is required to accommodate channels 3 and 4. 4x DSUB-9 Male Board Connectors **NOTE: THIS IS A DOUBLE-WIDE PCIE CARD THAT MAY CONSUME AN ADJACENT SLOT. PLEASE REVIEW MOTHERBOARD SLOT LAYOUT TO ASSESS SLOT USAGE** (p/n C.2043.06) Available for 32-bit systems and 64-bit systems.

A RIQ is required if this device is to be used in conjunction with a different ESD Series CAN device in the same system.

 PCIeESDCS-ES-CAN-400-4P EOL - This item is no longer available - See CS-ES-CAN-400-4P for similar device and API ESD CAN-PCI/400-4 The CAN-PCI/400 is a (2 I/O Slot) PCI board that features four (CAN-PCI/400-4) CAN High-Speed interfaces acc. to ISO 11898-2. CAN-PCI/400-4 comes with two CAN interfaces via a separate slot bracket. A second Rear I/O position is required to accommodate channels 3 and 4. 4x DSUB-9 Male Board Connectors **NOTE: THIS IS A DOUBLE-WIDE PCI CARD THAT MAY CONSUME AN ADJACENT SLOT. PLEASE REVIEW MOTHERBOARD SLOT LAYOUT TO ASSESS SLOT USAGE** (p/n C.2048.06) Available for 32-bit systems and 64-bit systems.

A RIQ is required if this device is to be used in conjunction with a different ESD Series CAN device in the same system.

 PCIeESDCS-ES-CAN-402-2PESD CAN-PCI/402-2 The CAN-PCI/402 is a PCI board that features two CAN High-Speed interfaces acc. to ISO 11898-2. 2x DSUB-9 Male Board Connectors (p/n C.2049.04)Available for 32-bit systems and 64-bit systems.

A RIQ is required if this device is to be used in conjunction with a different ESD Series CAN device in the same system.

 PCIeESDCS-ES-CAN-402-4PESD CAN-PCI/402-4 The CAN-PCI/402 is a (2 I/O Slot) PCI board that features four (CAN-PCI/402-4) CAN High-Speed interfaces acc. to ISO 11898-2. CAN-PCI/402-4 comes with two CAN interfaces via a separate slot bracket. A second Rear I/O position is required to accommodate channels 3 and 4. 4x DSUB-9 Male Board Connectors **NOTE: THIS IS A DOUBLE-WIDE PCI CARD THAT MAY CONSUME AN ADJACENT SLOT. PLEASE REVIEW MOTHERBOARD SLOT LAYOUT TO ASSESS SLOT USAGE** (p/n C.2049.06) Available for 32-bit systems and 64-bit systems.

A RIQ is required if this device is to be used in conjunction with a different ESD Series CAN device in the same system.

 PCIeIntelCS-IX-IB600-1IXXAT CAN-IB600/PCIe : One (1) Channel - CAN FD (ISO and NON ISO) or CAN 2.0A/B, ISO 11898-2 CAN bus coupling (high speed) (p/n 1.01.0233.12010)
 PCIeIntelCS-IX-IB600-2IXXAT CAN-IB600/PCIe : Two (2) Channels - CAN FD (ISO and NON ISO) or CAN 2.0A/B, ISO 11898-2 CAN bus coupling (high speed) (p/n 1.01.0233.22010)
 PCIESDCS-ES-CAN-402-1EESD CAN-PCIe/402-1 1-channel Active CAN Interface Board for PCIe x1, 3.3V - 1 CAN 2.0A/B Interface. Physical Layer according to ISO 11898, High Speed, Galvanically isolated- 1x DSUB-9 onboard male connector, 4x LEDs for CAN Board Status. (C.2045.02) Available for 32-bit systems and 64-bit systems.

A RIQ is required if this device is to be used in conjunction with a different ESD Series CAN device in the same system.

 PCIESDCS-ES-CAN-402-2DEESD CAN-PCIe/402-2-D 2-channel Active CAN Interface Board for PCIe x1, 3.3V - 2 CAN 2.0A/B Interfaces. Physical Layer according to ISO 11898, High Speed - 2x DSUB-9 male onboard connectors, 4x LEDs for CAN Board Status. (C.2045.05) This device is not electronically isolated.Available for 32-bit systems and 64-bit systems.

A RIQ is required if this device is to be used in conjunction with a different ESD Series CAN device in the same system.

 PCIESDCS-ES-CAN-402-2E THIS ITEM IS NOW FOUND IN THE STANDARD CATALOG - See CP-CAN-402-2E <\b> ESD CAN-PCIe/402-2 2-channel Active CAN Interface Board for PCIe x1, 3.3V - 2 CAN 2.0A/B Interfaces. Physical Layer according to ISO 11898, High Speed, Galvanically isolated - 2x DSUB-9 Connectors, 4x LEDs for CAN Board Status. (C.2045.04)Available for 32-bit systems and 64-bit systems.

A RIQ is required if this device is to be used in conjunction with a different ESD Series CAN device in the same system.

 PCIESDCS-ES-CAN-402-4DEESD CAN-PCIe/402-4-D/2 Slot (2 I/O Slot) 4-channel Active CAN Interface Board for PCIe x1, 3.3V - 4 CAN 2.0A/B Interfaces. Physical Layer according to ISO 11898, High Speed, - 2 Slot 4x DSUB-9 Connectors (2x DSUB9 on a separate bracket), 4x LEDs for CAN Board Status. **NOTE: THIS IS A DOUBLE-WIDE PCIE CARD THAT MAY CONSUME AN ADJACENT PCIE SLOT. PLEASE REVIEW MOTHERBOARD SLOT LAYOUT TO ASSESS SLOT USAGE** (C.2045.07) This device is not electronically isolated.Available for 32-bit systems and 64-bit systems.

A RIQ is required if this device is to be used in conjunction with a different ESD Series CAN device in the same system.

 PCIESDCS-ES-CAN-402-4EESD CAN-PCIe/402-4/2 Slot (2 I/O Slot) 4-channel Active CAN Interface Board for PCIe x1, 3.3V - 4 CAN 2.0A/B Interfaces. Physical Layer according to ISO 11898, High Speed, Galvanically isolated - 2 Slot 4x DSUB-9 Connectors (2x DSUB9 on a separate bracket), 4x LEDs for CAN Board Status. **NOTE: THIS IS A DOUBLE-WIDE PCIE CARD THAT MAY CONSUME AN ADJACENT PCIE SLOT. PLEASE REVIEW MOTHERBOARD SLOT LAYOUT TO ASSESS SLOT USAGE** (C.2045.06)Available for 32-bit systems and 64-bit systems.

A RIQ is required if this device is to be used in conjunction with a different ESD Series CAN device in the same system.

 PCIESDCS-ES-CAN-402-B4E THIS ITEM IS NOW FOUND IN THE STANDARD CATALOG - See CP-CAN-402-B4E <\b> ESD CAN-PCIe/402-B4/1Slot (1 Slot PCIe x1) 4-channel Active CAN Interface Board for PCIe x1, 3.3V - 4 CAN 2.0A/B Interfaces. Physical Layer according to ISO 11898, High Speed, Galvanically isolated- Includes cable - 1x DSUB-37 Connector, 4x LEDs for CAN Board Status. (C.2045.08) cable included. (CS-ES-CAN-4XX-CBL )Available for 32-bit systems and 64-bit systems.

A RIQ is required if this device is to be used in conjunction with a different ESD Series CAN device in the same system.

 PCIESDCS-ES-CAN-405-2P*Not Recommended For New Applications* ESD CAN-PCI/405 2-channel CAN Bus PCI device w/ IBM PPC405GP, 200MHz, 32MB SDRAM, 4MB Flash 4x CAN w/ Paddle Card adapter. (C.2023.05)Not recommended for new systems/applications.

A RIQ is required if this device is to be used in conjuntion with a different ESD Series CAN device in the same system.
 PCIESDCS-ES-CAN-405-4P*Not Recommended For New Applications* ESD CAN-PCI/405 (2 I/O Slot) 4-channel CAN Bus PCI device w/ IBM PPC405GP, 200MHz, 32MB SDRAM, 4MB Flash 4x CAN w/ Paddle Card adapter. **NOTE: THIS IS A DOUBLE-WIDE CARD THAT MAY CONSUME AN ADJACENT I/O SLOT. PLEASE REVIEW MOTHERBOARD SLOT LAYOUT TO ASSESS SLOT USAGE.** (ESD p/n C.2023.07)Not recommended for new systems/applications.

A RIQ is required if this device is to be used in conjuntion with a different ESD Series CAN device in the same system.
 PCIESDCS-ES-CAN-405-4PB4 EOL - This item is no longer available - See CS-ES-CAN-400-4P for similar device and API *Not Recommended For New Applications* ESD CAN-PCI/405-B 4-channel CAN Bus PCI device w/ IBM PPC405GP, 200MHz, 32MB SDRAM, 4MB Flash 4x CAN w/ Paddle Card adapter. 4 CAN Interfaces via one DSUB37 connector only one PCI slot required ((ESD p/n C.2041.04) *Includes DSUB37 to 4x DSUB9 (Male) cable. (ESD p/n C.2041.18) Not recommended for new systems/applications.

A RIQ is required if this device is to be used in conjuntion with a different ESD Series CAN device in the same system.
 PCIESDCS-ES-CAN-4XX-CBLESD CAN-PCI/4XX-B4-1C4 DSUB37-to-4xDSUB9 Cable for the CS-ES-CAN-402-B4E card with DSUB37 connector. This cable has 1x DSUB37 Female to 4x DSUB 9 Male connectors - Total Length 500mm. (ESD p/n C.2041.18) Also used with CS-ES-CAN-405-4PB4 devices.
 PCISoftingCS-SOF-CAN-AC2-PCI2-channel intelligent CAN PCI card (requires 5V PCI slot)Driver included with RT-LAB only. RIQ required for RedHawk driver.
 PCISoftingCS-SOF-CAN-PRO2-11-channel intelligent CAN PCIE card - CAN/CANopen Interface With Galvanic Isolation, Single Channel PCI Express Board
 PCISoftingCS-SOF-CAN-PRO2-22-channel intelligent CAN PCIE card - CAN/CANopen Interface With Galvanic Isolation, Dual Channel PCI Express Board
 PMCESDCS-ES-CAN-400-4MIESD CAN-PMC/400 4-channel PMC CAN Bus device with IRIG-B, ARINC 825 firmware. The PMC-CAN/400-4 features four electrically isolated CAN High-Speed interfaces according to ISO 11898. A FPGA handles the local data control and management. The PMC-CAN/400-4 provides high-resolution hardware timestamps. 4x DSUB-9 Male Board Connectors (C.2407.01 & C.1101.02)Available for 32-bit systems and 64-bit systems.

A RIQ is required if this device is to be used in conjunction with a different ESD Series CAN device in the same system.

 CableGridConnectCS-GC-CAN-USB(SIMWB SENSODrive Prerequisite) Single Channel USB CAN Adapter. Monitor a CAN network, write a CAN program and communicate with industrial, medical, automotive or other CAN based device. The CANbus USB adapter connects a CANbus to the USB port of an iHawk system, which also supplies the power to the adapter (no power supply needed). (MFG P/N GC-CAN-USB).For Use with SIMulation Workbench Only - RIQ required for Stand-alone Use.
CarrierPCIeGeneral StdsCS-GS-PMC2PCIE1PCIE to PMC Carrier: Adapts a single-width PMC form factor to a single lane PCI Express (x1 link). Onboard DC/DC Converter, no external power requirements. Support both 3.3V and 5V Signaling, PCI & PCI-X Bus. Requires available PCI-e x4 compatible slot. (GS P/N PCIe1-to-PMC-Adapter-0)
 PCIeGeneral StdsCS-GS-PMC2PCIE1FPCIE to PMC Carrier: Adapts a single-width PMC form factor to a single lane PCI Express (x1 link). Cooling Fan, Onboard DC/DC Converter, no external power requirements. Support both 3.3V and 5V Signaling, PCI & PCI-X Bus. Requires available PCI-e x4 compatible slot. (GS P/N PCIe1-to-PMC-Adapter-1)
 PCIeGeneral StdsCS-GS-PMC2PCIE4PCIE to PMC Carrier: Adapts a single-width PMC form factor to a single lane PCI Express (x4 link). Onboard DC/DC Converter, no external power requirements. Support both 3.3V and 5V Signaling, PCI & PCI-X Bus. Requires available PCI-e x4 compatible slot. (GS P/N PCIe4-to-PMC-Adapter-0)
 PCIeGeneral StdsCS-GS-PMC2PCIE4FPCIE to PMC Carrier: Adapts a single-width PMC form factor to a single lane PCI Express (x4 link). Cooling Fan, Onboard DC/DC Converter, no external power requirements. Support both 3.3V and 5V Signaling, PCI & PCI-X Bus. Requires available PCI-e x4 compatible slot. (GS P/N PCIe4-to-PMC-Adapter-1)
 PCIeSystranCS-TB-4933Technobox 4933 32-bit 33 MHz PMC-to-PCI Adapter Card
 PCIGeneral StdsCS-GS-PMC2PCIPCI to PMC carrier: Supports both 32/64 bit PCI Bus, Supports both 3.3v and 5v PCI Signaling, Supports both 33Mhz and 66Mhz PCI Bus, Optional Rear I/O Configuration available (including cabling), Field-alterable configuration features, Adapts a single-width PMC form factor to PCI. Note: This is a "bridgeless" solution. (GS P/N PCI-to-PMC)
 PCIGeneral StdsCS-GS-PMC2PCIXPCIX to PMC Carrier: Adapts a single-width PMC form factor to a single lane PCIX Slot. 64Bit PCI-X Bus to 64Bit PMC Adapter on a PCI card (short length). Operates with any combination of 64Bit or 32Bit PMC cards in 64Bit or 32Bit PCI-X Bus. Requires available PCIX compatible slot. (GS P/N PMC-TO-PCIX ADAPTER)
Counter/TimerPCIeNAICS-NA-79C3-5J-09NAII 79C3-5J5J5JC0 PCIe 9 Channels ( Not supported by SimWB) (3x 3 Channel 5J Modules), DL(R)V SIM, 2-11.8 Vrms output, 2-28 Vrms EXC, 1-3KHz, 0.1VA?CH, without Encoder/Commutation Option, 0ºC to +70ºC. Connections via 78-pin D-Sub panel connector. *Extended Lead Times 20 weeks.
 PCIeNAICS-NA-79C3-E7-04NAII 79C3-E7Z0Z0C0 PCIe 4 Channels ( Not supported by SimWB) (1x 4 Channel E7 Modules), Signal Voltage: RS422 / 24 VDC, 32-bit Resolution, Supported Mode: Encoder (SSI, A-Quad-B), Counter (up/down), without Encoder/Commutation Option, 0ºC to +70ºC. Connections via 78-pin D-Sub panel connector. *Extended Lead Times 20 weeks.
 PCIeNAICS-NA-79C3-E7-08NAII 79C3-E7E7Z0C0 PCIe 8 Channels ( Not supported by SimWB) (2x 4 Channel E7 Modules), Signal Voltage: RS422 / 24 VDC, 32-bit Resolution, Supported Mode: Encoder (SSI, A-Quad-B), Counter (up/down), without Encoder/Commutation Option, 0ºC to +70ºC. Connections via 78-pin D-Sub panel connector. *Extended Lead Times 20 weeks.
 PCIeNAICS-NA-79C3-E7-12NAII 79C3-E7E7E7C0 PCIe 12 Channels ( Not supported by SimWB) (3x 4 Channel E7 Modules), Signal Voltage: RS422 / 24 VDC, 32-bit Resolution, Supported Mode: Encoder (SSI, A-Quad-B), Counter (up/down), without Encoder/Commutation Option, 0ºC to +70ºC. Connections via 78-pin D-Sub panel connector. *Extended Lead Times 20 weeks.
 PCINICS-NI-PCI-6602Eight 32-bit counter/timers and up to 32 lines of TTL/CMOS-compatible digital I/O, ncoder position measurement, event counting, period measurement, pulse width measurement, pulse generation, pulse train generation and frequency measurement. Software support through SIMulation Workbench only. Standalone driver not available.RedHawk driver is not available. Device supported is supported Pre-6.0 OS release only in two ways: (1) Standalone w/DAQmx or (2) SimWB w/DAQmx DAQmx requires an RIQ and is limited to 32-bit only and < 4GB memory. ***DAQmx cannot be supported beyond RedHawk 5.4 due to limitations imposed by National Instruments Linux support***
 PCIOmegaCS-OME-TMC12The OME-PCI-TMC12 is a PCI-Bus general purpose counter/ timer and digital I/O board. It provides twelve 16-bit counter/ timer channels. Two internal clock sources (8M /1.6M and 0.8M / 80K) are selected by jumper. Four 8254 chips provide a variety of powerful counter/timer function modes to match your industrial and laboratory applications. (Vendor p/n OME-PCI-TMC12)This card is a PCI 32-bit 5V only device. Requires a native PCI 5V slot location.
DigitalPCIeConcurrentCP-COS-64The CP-COS-64 is a 64-channel TTL digital input PCIe card that can track the change of state of digital inputs at 100 MHz (10 nanoseconds). A 10 microsecond clock is also output on pin DIO_95 that can synchronize the clock on the COS card to other systems. The card features a x4 lane PCI Express interface for high speed transfer of data to and from the card. Individual channels can also be masked to disable change detection. (Cables: CX-CBL-HSI-F-0n; Breakout module CX-CBL-AIO-BRKF)

Supported by SimWB
 PCIeGeneral StdsCS-GS-HPDI32AE-1MHigh-speed 32 Bit Parallel Digital I/O PCIe Board; Differential RS-485/422 cable transceiver version w/ 128K x 32-bit FIFOs on each chan (both Tx & Rx, 1M byte total); GS p/n PCIe-HPDI32A-1M
 PCIeGeneral StdsCS-GS-HPDI32AE-256High-speed 32 Bit Parallel Digital I/O PCIe Board; Differential RS-485/422 cable transceiver version w/ 32K x 32-bit FIFOs on each chan (both Tx & Rx, 256K byte total); GS p/n PCIe-HPDI32A-256K
 PCIeGeneral StdsCS-GS-HPDI32AE-64High-speed 32 Bit Parallel Digital I/O PCIe Board; Differential RS-485/422 cable transceiver version w/ 8K x 32-bit FIFOs on each chan (both Tx & Rx, 64K byte total);GS P/N PCeI-HPDI32A-64K
 PCIeGeneral StdsCS-GS-OPTO16-R82KThe CS-PCIe-OPTO16-R82K Native PCIe board with 8.2K Ohm Resistors for all channels, 32 optically-coupled digital I/O channels consisting of 16 outputs and 16 inputs. Each channel is electrically isolated (5000 Volts) from the PCIe host processor board. 2.3 milli-Amps Input Current. 16 Optically isolated output - 12 normal outputs, 4 diode clamped. Change-of-State Interrupts allow for an interrupt to the PCIe host to be generated from any level change on any input. (PCIe-OPTO16X16-R8.2K) micro
 PCIeGeneral StdsCS-GS-OPTO16X16-05The CS-PCIe-OPTO16X16 Native PCIe board has 5 Volt 32 optically-coupled digital I/O channels consisting of 16 outputs and 16 inputs. Each channel is electrically isolated (5000 Volts) from the PCIe host processor board. 2.3 milli-Amps Input Current. 16 Optically isolated output - 12 normal outputs, 4 diode clamped. Change-of-State Interrupts allow for an interrupt to the PCIe host to be generated from any level change on any input. (PCIe-OPTO16X16-5V)
 PCIeGeneral StdsCS-GS-OPTO16X16-12The CS-PCIe-OPTO16X16 Native PCIe board has 12 Volt 32 optically-coupled digital I/O channels consisting of 16 outputs and 16 inputs. Each channel is electrically isolated (5000 Volts) from the PCIe host processor board. 2.3 milli-Amps Input Current. 16 Optically isolated output - 12 normal outputs, 4 diode clamped. Change-of-State Interrupts allow for an interrupt to the PCIe host to be generated from any level change on any input. (PCIe-OPTO16X16-12V)
 PCIeGeneral StdsCS-GS-OPTO16X16-28The CS-PCIe-OPTO16X16 Native PCIe board has 28 Volt 32 optically-coupled digital I/O channels consisting of 16 outputs and 16 inputs. Each channel is electrically isolated (5000 Volts) from the PCIe host processor board. 2.3 milli-Amps Input Current. 16 Optically isolated output - 12 normal outputs, 4 diode clamped. Change-of-State Interrupts allow for an interrupt to the PCIe host to be generated from any level change on any input. (PCIe-OPTO16X16-28V)
 PCIeGeneral StdsCS-GS-OPTO16X16-48The CS-PCIe-OPTO16X16 Native PCIe board has 48 Volt 32 optically-coupled digital I/O channels consisting of 16 outputs and 16 inputs. Each channel is electrically isolated (5000 Volts) from the PCIe host processor board. 2.3 milli-Amps Input Current. 16 Optically isolated output - 12 normal outputs, 4 diode clamped. Change-of-State Interrupts allow for an interrupt to the PCIe host to be generated from any level change on any input. (PCIe-OPTO16X16-48V)
 PCIeGeneral StdsCS-GS-OPTO32A-05EThe PCIe-OPTO32A board has 32 optically-coupled digital I/O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the PMC host processor board. Change-of-State Interrupts allow for an interrupt to the PCI host to be generated from any level change on any input. (PCIe-OPTO32A-5V) ** SEE DRIVER TECHNICAL CONDITIONS ** ** DRIVER TECHNICAL CONDITIONS** General Standards has discontinued support for their legacy driver for the Opto32 I/O device. The new driver has changes to the API for OS releases 6.0 and later. Any applications written under 6.0 or earlier utilizing the older legacy driver will have to be modified to reflect this new API.
 PCIeGeneral StdsCS-GS-OPTO32A-12EThe PCI-eOPTO32A board has 32 optically-coupled digital I/O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the PMC host processor board. Change-of-State Interrupts allow for an interrupt to the PCI host to be generated from any level change on any input. (PCIe-OPTO32A-12V) ** SEE DRIVER TECHNICAL CONDITIONS ** ** DRIVER TECHNICAL CONDITIONS** General Standards has discontinued support for their legacy driver for the Opto32 I/O device. The new driver has changes to the API for OS releases 6.0 and later. Any applications written under 6.0 or earlier utilizing the older legacy driver will have to be modified to reflect this new API.
 PCIeGeneral StdsCS-GS-OPTO32A-24EThe CS-PCIe-OPTO32A board has 32 optically-coupled digital I/O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the PMC host processor board. Change-of-State Interrupts allow for an interrupt to the PCI host to be generated from any level change on any input. (PCIe-OPTO32A-24V) ** SEE DRIVER TECHNICAL CONDITIONS ** ** DRIVER TECHNICAL CONDITIONS** General Standards has discontinued support for their legacy driver for the Opto32 I/O device. The new driver has changes to the API for OS releases 6.0 and later. Any applications written under 6.0 or earlier utilizing the older legacy driver will have to be modified to reflect this new API.
 PCIeGeneral StdsCS-GS-OPTO32A-28EThe CS-PCIe-OPTO32A board has 32 optically-coupled digital I/O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the PMC host processor board. Change-of-State Interrupts allow for an interrupt to the PCI host to be generated from any level change on any input. (PCIe-OPTO32A-28V) ** SEE DRIVER TECHNICAL CONDITIONS ** ** DRIVER TECHNICAL CONDITIONS** General Standards has discontinued support for their legacy driver for the Opto32 I/O device. The new driver has changes to the API for OS releases 6.0 and later. Any applications written under 6.0 or earlier utilizing the older legacy driver will have to be modified to reflect this new API.
 PCIeGeneral StdsCS-GS-OPTO32A-48EThe PCIe-OPTO32A board has 32 optically-coupled digital I/O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the PMC host processor board. Change-of-State Interrupts allow for an interrupt to the PCI host to be generated from any level change on any input. (PCIe-OPTO32A-48V) ** SEE DRIVER TECHNICAL CONDITIONS ** ** DRIVER TECHNICAL CONDITIONS** General Standards has discontinued support for their legacy driver for the Opto32 I/O device. The new driver has changes to the API for OS releases 6.0 and later. Any applications written under 6.0 or earlier utilizing the older legacy driver will have to be modified to reflect this new API.
 PCIeGeneral StdsCS-GS-OPTO32C-12CThe PCIe-OPTO32C-12V-CONTACT is a native PCIe device supporting Input Voltage 12 Volt, Input Resistance 5100O, Input Current 23milli-Amps. This device has 32 optically-coupled digital I/O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the PMC host processor board. Change-of-State Interrupts allow for an interrupt to the PCIe host to be generated from any level change on any input. 8 optically isolated outputs - 4 normal outputs, 4 diode clamped. (GS P/N - PCIe-OPTO32C-12V-Conctact) True PCIe device. Extended lead time 10-12 weeks should be expected for this device.
 PCIeGeneral StdsCS-GS-OPTO32C-28EThe PCIe-OPTO32C-28V is a native PCIe device supporting Input Voltage 28 Volts, Input Resistance 5100O, Input Current 23milli-Amps. This device has 32 optically-coupled digital I/ O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the PCI host processor board. Change-of-State Interrupts allow for an interrupt to the PCeI host to be generated from any level change on any input. Built-in-self-test, selectable debounce times, input pulse counter, and I/ O voltages to 50 Volts. (GS P/N - PCIe-OPTO32C-28V) True PCIe device. Extended lead time 10-12 weeks should be expected for this device.
 PCIeGeneral StdsCS-GS-OPTO32C-82KThe PCIe-OPTO32C-R8.2K is a native PCIe device w/ custom 8.2K Ohm resistors installed on input channels 0-23 (see note). This device has 32 optically-coupled digital I/O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the PMC host processor board. Change-of-State Interrupts allow for an interrupt to the PCI host to be generated from any level change on any input. (PCIe-OPTO32C-R8.2K) Note: In order to meet boards specifications, Input Voltage Values should of sufficient value to provide a minimum input current of 2.3 mA for any given custom resistor values installed on input channels. (Minimum voltage 18.86V for the resistor option provided with this board).True PCIe device. Extended lead time 10-12 weeks should be expected for this device.
 PCIeNICS-NI-PCIE-6509NI PCIe-6509 Device -96 bidirectional digital I/O lines, 5 V TTL/CMOS (line direction selectable on an 8-bit port basis) (Compatible with CS-NI-PCI-DIO96 & CS-NI-PCI-6509 cables and connector blocks). Only DIO functionality supported. Support for functions such as watchdog timers, programmable power-up states, EEPROM programming, interrupts, etc. are not supported by the driver for this card and will require an RIQ to determine additional costs. Includes 820-2020372-002 (Power Y-cable). (RoHS Compliant)This product is not compatible with the PCI version of the driver. No Interrupt support is provided.
 PCIGeneral StdsCS-GS-DIO24High-Speed Parallel I/O; 24 Input/Output Bits
 PCIGeneral StdsCS-GS-HPDI32A-1MHigh-speed 32 Bit Parallel Digital I/O PCI Board; Differential RS-485/422 cable transceiver version w/ 128K x 32-bit FIFOs on each chan (both Tx & Rx, 1M byte total); GS p/n PCI-HPDI32A-1M
 PCIGeneral StdsCS-GS-HPDI32A-256High-speed 32 Bit Parallel Digital I/O PCI Board; Differential RS-485/422 cable transceiver version w/ 32K x 32-bit FIFOs on each chan (both Tx & Rx, 256K byte total); GS p/n PCI-HPDI32A-256K
 PCIGeneral StdsCS-GS-HPDI32A-64High-speed 32 Bit Parallel Digital I/O PCI Board; Differential RS-485/422 cable transceiver version w/ 8K x 32-bit FIFOs on each chan (both Tx & Rx, 64K byte total);GS P/N PCI-HPDI32A-64K
 PCIGeneral StdsCS-GS-HPDI32AL-1MHigh-speed 32 Bit Parallel Digital I/O PCI Board; Differential RS-485/422 cable transceiver version w/ 128Kx32-bit FIFOs on both Tx & Rx, 1M byte GS p/n PCI64-HPDI32AL-1M-RS485
 PCIGeneral StdsCS-GS-HPDI32AL-256High-speed 32 Bit Parallel Digital I/O PCI Board; 256K Differential RS-485/422 cable transceiver version w/ 32Kx32-bit FIFOs on both Tx & Rx,256K byte total GS p/n PCI64-HPDI32AL-256K-RS485
 PCIGeneral StdsCS-GS-HPDI32AL-64High-speed 32 Bit Parallel Digital I/O PCI Board; 64K Differential RS-485/422 cable transceiver version w/ 8Kx32-bit FIFOs on both Tx & Rx, 64K byte total GS P/N PCI64-HPDI32AL-64K-RS485
 PCIGeneral StdsCS-GS-HPDI32AT-1MHigh-speed 32 Bit Parallel Digital I/O PCI Board; 1M-LVDS with 128Kx32-bit FIFOs on both Tx & Rx, 1M byte total; GS p/n PCI64-HPDI32AL-1M-LVDS
 PCIGeneral StdsCS-GS-HPDI32AT-256High-speed 64 Bit Parallel Digital I/O PCI Board; 256K-LVDS; 32Kx32-bit FIFOs on both Tx & Rx,256K byte total; GS p/n PCI64-HPDI32AL-256K-LVDS
 PCIGeneral StdsCS-GS-HPDI32AT-64High-speed 32 Bit Parallel Digital I/O PCI Board; 64K-LVDS; 8Kx32-bit FIFOs on both Tx & Rx, 64K byte total; GS p/n PCI64-HPDI32AL-64K-LVDS
 PCIGeneral StdsCS-GS-HPDI32TL-1MHigh-speed 32 Bit Parallel Digital I/O PCI Board; 1M-TTL with 128Kx32-bit FIFOs on both Tx & Rx, 1M byte total; GS p/n PCI64-HPDI32ALT-1M-TTL
 PCIGeneral StdsCS-GS-HPDI32TL-1MEHigh-speed 32 Bit Parallel Digital I/O PCIe x4 Board; 1M, LVDS with 128Kx32-bit FIFOs on both Tx & Rx, 1M byte total; GS p/n PCIE-HPDI32ALT-1M-LVDS
 PCIGeneral StdsCS-GS-HPDI32TL-256High-speed 32 Bit Parallel Digital I/O PCI Board; 256K-TTL with 32Kx32-bit FIFOs on both Tx & Rx,256K byte total; GS p/n PCI64-HPDI32ALT-256K-TTL
 PCIGeneral StdsCS-GS-HPDI32TL-64EHigh-speed 32 Bit Parallel Digital I/O PCIe x4 Board; 1M, LVDS with 8Kx32-bit FIFOs on both Tx & Rx, 64Kbyte total; GS p/n PCIE-HPDI32ALT-64K-LVDS
 PCIGeneral StdsCS-GS-HPDI32TT-64EHigh-speed 32 Bit Parallel Digital I/O PCIe Board; 64K-TTL; 8Kx32-bit FIFOs on both Tx & Rx, 64K byte total; GS p/n PCIe464-HPDI32ALT-64K-TTL
 PCIGeneral StdsCS-GS-HPDI32TTL-64High-speed 32 Bit Parallel Digital I/O PCI Board; 64K-TTL; 8Kx32-bit FIFOs on both Tx & Rx, 64K byte total; GS p/n PCI64-HPDI32ALT-64K-TTL
 PCIGeneral StdsCS-GS-OPTO32A-05The CS-PCI-OPTO32A board has 32 optically-coupled digital I/O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the PMC host processor board. Change-of-State Interrupts allow for an interrupt to the PCI host to be generated from any level change on any input. (PCI-OPTO32A-5V) ** SEE DRIVER TECHNICAL CONDITIONS ** ** DRIVER TECHNICAL CONDITIONS** General Standards has discontinued support for their legacy driver for the Opto32 I/O device. The new driver has changes to the API for OS releases 6.0 and later. Any applications written under 6.0 or earlier utilizing the older legacy driver will have to be modified to reflect this new API.
 PCIGeneral StdsCS-GS-OPTO32A-12The PCI-OPTO32A board has 32 optically-coupled digital I/O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the PMC host processor board. Change-of-State Interrupts allow for an interrupt to the PCI host to be generated from any level change on any input. (PCI-OPTO32A-12V) ** SEE DRIVER TECHNICAL CONDITIONS ** ** DRIVER TECHNICAL CONDITIONS** General Standards has discontinued support for their legacy driver for the Opto32 I/O device. The new driver has changes to the API for OS releases 6.0 and later. Any applications written under 6.0 or earlier utilizing the older legacy driver will have to be modified to reflect this new API.
 PCIGeneral StdsCS-GS-OPTO32A-24The CS-PCI-OPTO32A board has 32 optically-coupled digital I/O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the PMC host processor board. Change-of-State Interrupts allow for an interrupt to the PCI host to be generated from any level change on any input. (PCI-OPTO32A-24V) ** SEE DRIVER TECHNICAL CONDITIONS ** ** DRIVER TECHNICAL CONDITIONS** General Standards has discontinued support for their legacy driver for the Opto32 I/O device. The new driver has changes to the API for OS releases 6.0 and later. Any applications written under 6.0 or earlier utilizing the older legacy driver will have to be modified to reflect this new API.
 PCIGeneral StdsCS-GS-OPTO32A-28The CS-PCI-OPTO32A board has 32 optically-coupled digital I/O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the PMC host processor board. Change-of-State Interrupts allow for an interrupt to the PCI host to be generated from any level change on any input. (PCI-OPTO32A-28V) ** SEE DRIVER TECHNICAL CONDITIONS ** ** DRIVER TECHNICAL CONDITIONS** General Standards has discontinued support for their legacy driver for the Opto32 I/O device. The new driver has changes to the API for OS releases 6.0 and later. Any applications written under 6.0 or earlier utilizing the older legacy driver will have to be modified to reflect this new API.
 PCIGeneral StdsCS-GS-OPTO32A-48The PCI-OPTO32A board has 32 optically-coupled digital I/O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the PMC host processor board. Change-of-State Interrupts allow for an interrupt to the PCI host to be generated from any level change on any input. (PCI-OPTO32A-48V) ** SEE DRIVER TECHNICAL CONDITIONS ** ** DRIVER TECHNICAL CONDITIONS** General Standards has discontinued support for their legacy driver for the Opto32 I/O device. The new driver has changes to the API for OS releases 6.0 and later. Any applications written under 6.0 or earlier utilizing the older legacy driver will have to be modified to reflect this new API.
 PCIGeneral StdsCS-GS-OPTO32B-82KThe PCI-OPTO32B device w/ custom 8.2K Ohm resistors installed on input channels 0-23 (see note). This device has 32 optically-coupled digital I/O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the PMC host processor board. Change-of-State Interrupts allow for an interrupt to the PCI host to be generated from any level change on any input. (PCI-OPTO32B-R8.2K) Note: In order to meet boards specifications, Input Voltage Values should of sufficient value to provide a minimum input current of 2.3 mA for any given custom resistor values installed on input channels. (Minimum voltage 18.86V for the resistor option provided with this board). ** SEE DRIVER TECHNICAL CONDITIONS ** ** DRIVER TECHNICAL CONDITIONS** General Standards has discontinued support for their legacy driver for the Opto32 I/O device. The new driver has changes to the API for OS releases 6.0 and later. Any applications written under 6.0 or earlier utilizing the older legacy driver will have to be modified to reflect this new API.
 PCINICS-NI-PCI-6509NI PCI-6509 PCI/PCI-X Device -96 bidirectional digital I/O lines, 5 V TTL/CMOS (line direction selectable on an 8-bit port basis) (Also Compatible with CS-NI-PCI-DIO96 cables and connector blocks)This product has a Concurrent Developed RedHawk Kernel Driver
 PCINICS-NI-PCI-DIO-96**This device is not recommended for new designs.** Please use CS-NI-PCI-6509 as a recommended replacement. National Instrument 96-bit Digital I/O board. (PCI-DIO96)Supported by RedHawk and SimWB. This item should be used only for legacy applications in which the CS-NI-PCI-DIO-96 is already in use.
 PCIPrecision AnalogCS-PAS-2080-000The PAS 2080/DIO is a PCI based, 32 channel Change Of State, (COS), detector and 8 channel, Time To Edge, (TTE), pattern generator with 1 uSec resolution. Separate input and output FIFO’s are provided to elastically buffer the input and output data patterns from the PCI bus. A 40 bit , 1 MHz counter that can be set and enabled from the PCI bus is also provided to time stamp the input data, and to determine when the output patterns are updated. **Note - For use with SIMulation WorkBench, a RCIM w/ custom Oscillator may be required. Please contact Home Office for further information **
 PCIUEICS-UEI-PD2-DIO128I64 optoisolated digital inputs, 64 optoisolated digital outputs, Configured in ports with 16 channels, 125V isolation between ports, ports and PC, Generate interrupt on any input line, Full Length PCIx, Input Currents to 6mA, Output Currents to 500mA. (p/n PD@2-DIO-128I) Accessories: CS-UEI-PD-CBL-40, CS-UEI-PD-STP-40Third Party Vendor Library provided w/o further enhancements or bug fixes. Customer to determine which accessories are appropriate to meet their application and external equipment requirements.
 VMEPrecision AnalogCS-PAS-9795DIO80 Channel TTL Level Digital Input / Digital Output VME board
 CableGeneral StdsCS-GS-C06-DIO24 6 foot Cable Non-Shielded for the CS-GS-DIO24 (CBL6-DIO24)
 CableGeneral StdsCS-GS-C06-HPDI32 6 foot Cable Non-Shielded for the CS-GS-HPDI32x Series (CBL6-HPDI32)
 CableGeneral StdsCS-GS-C06-OPT32 6 foot Cable Non-Shielded for the CS-GS-OPTO32x (x=A or B or C) (CBL6-OPTO32A/B/C). This cable has D-Sub 68pin connectors on both ends.
 CableGeneral StdsCS-GS-C06-OPTO32ACustom PCI-OPTO32 6 foot Cable for the CS-GS-OPTO32x (x=A or B or C) board (Ribbon cable with a 68pin SCSI D-sub and 2x DB25F and 3x DB25M) (Vendor p/n CABLE06-OPTO32A-3DB25M-2DB25F)This cable is a non-standard cable from General Standards: CABLE06-OPTO32A-3DB25M-2DB25F
 CableGeneral StdsCS-GS-C12-HPDI32 12 foot Cable Non-Shielded for the CS-GS-HPDI32ALx Series (CBL12-HPDI32)
 CableGeneral StdsCS-GS-C12-OPT3212 foot Cable Non-Shielded for the CS-GS-OPTO32x (x=A or B or C) (CBL12-OPTO32A/B/C). This cable has D-Sub 68pin connectors on both ends.
 CableGeneral StdsCS-GS-C12-OPTO32ACustom PCI-OPTO32 12 foot Cable for the CS-GS-OPTO32x (x=A or B or C) board (Ribbon cable with a 68pin SCSI D-sub and 2x DB25F and 3x DB25M) (Vendor p/n CABLE12-OPTO32A-3DB25M-2DB25F)This cable is a non-standard cable from General Standards: CABLE12-OPTO32A-3DB25M-2DB25F
 CableGeneral StdsCS-GS-C6-OPTO32ACustom PCI-OPTO32 6.5 foot Cable for the CS-GS-OPTO32x (x=A or B or C) board (Ribbon cable with a 68pin SCSI D-sub and 2x DB25F and 3x DB25M) (Vendor p/n CABLE6.5-OPTO32A-3DB25M-2DB25F)This cable is a non-standard cable from General Standards: CABLE6.5-OPTO32A-3DB25M-2DB25F
 CableGeneral StdsCS-GS-CS06-OPT16 6 foot Cable Shielded for the CS-GS-OPTO16x16 (CABLESH06-OPTO16x16-W2). This cable has D-Sub 68pin connectors on both ends.
 CableGeneral StdsCS-GS-CS06-OPT32 6 foot Cable Shielded for the CS-GS-OPTO32x (x=A or B or C) (CABLESH06-OPTO32A--5DB25P-W1). This cable has D-Sub 68pin connectors on device side and 5x DB25 male connectors on the fields side of the cable.
 CableGeneral StdsCS-GS-CS12-OPT16 12 foot Cable Shielded for the CS-GS-OPTO16x16 (CABLESH12-OPTO16x16-W2). This cable has D-Sub 68pin connectors on both ends.
 CableGeneral StdsCS-GS-CS12-OPT32 12 foot Cable Shielded for the CS-GS-OPTO32x (x=A or B or C) (CABLESH12-OPTO32A-5DB25-W1). This cable has D-Sub 68pin connectors on device side and 5x DB25 male connectors on the fields side of the cable.
 CableGeneral StdsCS-GS-CSH12-OPT3212 foot Cable Shielded for the CS-GS-OPTO32x (x=A or B or C) (CABLE12SH-OPTO32A/B/C). This cable has D-Sub 68pin connectors on both ends.
 CableGeneral StdsCS-GS-CSH12-OPT32CCustom *Cable 12 foot Shielded Cable for the CS-GS-OPTO32x (x=A or B or C) board Shielded Ribbon cable with a 68pin SCSI D-sub and 2x DB25F Output Connectors and 3x DB25M Input Connectors) (*Concurrent Real-Time built cable p/n 720-1861266-902)This cable is a non-standard cable built by Concurrent Real-Time.
 CableNICS-NI-PCI-DIO-CBLCustom Cable for the CS-NI-PCI-DIO-96 and CS-NI-PCI-6509 card. 6.5M Ribbon Cable with 100pin SCSI D-sub and two DB50.Custom Cable for the PCI-DIO 96 CABLE6.5-DIO96-DB50S-ORBITAL
 CableUEICS-UEI-PD-CBL-40Ribbon Cable - 40pin - 1M for the CS-UEI-PD2-DIO128I (PD-CBL-40)
 AccessoryGeneral StdsCS-GS-IM-DIO24Cable Interface Module for the CS-GS-DIO24. Transitions between high density connectors and high quality spring loaded terminal blocks. Modules are 2.88" in width (length varies depending on part number) so they can be mounted in standard DIN rail fixtures. Terminal blocks accept 18 - 26 AWG wire.
 AccessoryGeneral StdsCS-GS-IM-HPDI32Cable Interface Module for the CS-GS-HPDI32x. Transitions between high density connectors and high quality spring loaded terminal blocks. Modules are 2.88" in width (length varies depending on part number) so they can be mounted in standard DIN rail fixtures. Terminal blocks accept 18 - 26 AWG wire.
 AccessoryGeneral StdsCS-GS-IM-OPTO32Cable Interface Module for the CS-GS-OPTO32x. Transitions between high density connectors and high quality spring loaded terminal blocks. Modules are 2.88" in width (length varies depending on part number) so they can be mounted in standard DIN rail fixtures. Terminal blocks accept 18 - 26 AWG wire.
 AccessoryGeneral StdsCS-GS-IM-SIO4BX2Cable Interface Module for the CS-GS-SIO4BX2 Serial Controller. Transitions between high density connectors and high quality spring loaded terminal blocks. Modules are 2.88" in width (length varies depending on part number) so they can be mounted in standard DIN rail fixtures. Terminal blocks accept 18 - 26 AWG wire.
 AccessoryNICS-NI-776164-90CB-50 I/O Connector Block with DIN Rail Mounting without Cable for the CS-NI-PCI-DIO-96Accessory for CS-NI-PCI-DIO-96 & CS-NI-PCI-6509
 AccessoryUEICS-UEI-PD-STP-4040-way screw terminal panel used with Cable CS-UEI-PD-CBL-40 for the CS-UEI-PD2-DIO128i (PD-STP-40)
EtherCATPCIeESDCS-ES-ECAT-FPGAESD EtherCAT PCIe/FPGA Slave Interface for PCs ECS-PCIe/FPGA EtherCAT® Slave Interface. This device replaces the CS-ES-ECAT-SE adapter as it has better performance and is now end of life. (ESD p/n E.1106.02 )
ExpansionPCIHighlandCS-HT-V120-1High-Performance PCIe-to-Single VME Chassis Controller w/3 meter cable. Supports <200 nanosecond PIO. Includes: 1 ea. PCIe x8 Host Bus Adapter, 1 ea. 3-meter 4x PCI express cables, 1 ea. VME Crate Controller Card – 6U Single Wide VME module. Features: Provides 8192 16kB VME mapping pages, Individual page descriptors support address mapping/modifiers, speed options, dynamic endian swapping, Diagnostics: power supply and temperature monitors - Reads back DTACK speed - address/data and errors for any transaction, Front panel LEDs and bus signal scope monitors are provided, DMA support (non-burst mode), Interrupt support available – see driver restrictions, Supports VME64 Form Factor, A64 Addressing not supported. VME Chassis sold separately.
 PCIHighlandCS-HT-V120-2High-Performance PCIe-to-Dual VME Chassis Controllers w/3 meter cables. Supports <200 nanosecond PIO. Includes: 1 ea. PCIe x8 Host Bus Adapter for two crates, 2 ea. 3-meter 4x PCI express cables, 2 ea. VME Crate Controller Cards – 6U Single Wide VME module, Features: Two memory mapped VME crates supported with one PCIe x8 Host Bus Adapter, Provides 8192 16kB VME mapping pages, Individual page descriptors support address mapping/modifiers, speed options, dynamic endian swapping, Diagnostics: power supply and temperature monitors - Reads back DTACK speed - address/data and errors for any transaction, Front panel LEDs and bus signal scope monitors are provided, DMA support (non-burst mode), Interrupt support available – see driver restrictions, Supports VME64 Form Factor, A64 Addressing not supported. VME Chassis sold separately.
 PCIHighlandCS-HT-V120-C20Cable Upgrade - V120 20m Fiber Optic Cable (This cable replaces the 3-meter cable include with purchase of CS-HT-V120-X) iPass form factor, Gen 3 speed, Lightweight 3 mm diameter cable, Supports PCIe auxiliary signaling (CPWRON, CPERST#, CPRSNT#, CWAKE#,( p/n pcieo-4g3-020.0-11) Purchase of two (2) of these is required when purchasing CS-HT-V120-2. Lead Time - 8 Weeks.
FlexRayPCIElektrobitCS-EB-5100EB 5100: Active FlexRay Interface Hardware for PCI - High performance Freescale MPC5200B Microcontroller with 400Mhz 32MB SDRAM / 8MB Flash - 5 slots for physical layer modules - 2 FlexRay E-Ray Controllers in FPGA. Requires Configuration Tool EB tresos Busmirror - Requires previous purchase of EB tresos Busmirror Configuraiton tools via the RIQ process. This item is included in this catalog for repeat board purchase only.Available for 32-bit systems only at this time. Cannot be purchased for 64-bit systems.
 PCITZMCS-TZ-FLEX-PCIEOL - DISCONTINUED - No longer available for new quotations. FlexCard PMC/PCI - 32-bit PCI-interface, 3.3V & 5V, 2MB internal RAM, FlexRay protocol version V.21, Switchable termination Resistors, 4 bus connections.Available for 32-bit systems only at this time. Cannot be purchased for 64-bit systems. Support provided through SimWB only. PMC device mounted on PMC to PCI carrier.
FrequencyVMEHighlandCS-HT-V3608-channel Period, Frequency & RPM measurement
GPIBPCIeNICS-NI-PCIE-GPIBHigh-Performance IEEE-488 GPIB Controller for PCIe - Ships with the RedHawk implementation of the Open Source SourceForge driver. Low Provile with Standard Bracket
 CableNICS-NI-763061-02IEEE-488 2 Meter Cable for the CS-NI-PCI-GPIB/LPAccessory for CS-NI-PCI-GBIB/LP
IEEE-1394PCIeUnibrainCS-UNI-1232Unibrain Fireboard800-e V.2 3-port 1394b x1 PCIe adapter. The adapter is based on the LSI FW643 PCI Express 1394b Host Controller chipset.RedHawk Server Linux is supplied with the basic OHCI IEEE 1394 driver. An RIQ is required for any additonal Firewire device type support (i.e. Storage Media, DV, Juju, etc)
 PCIUnibrainCS-UNI-1234EOL - Use CS-UNI-1237 when ordering Fireboard-800™ V.2 Unibrain's 3-port 1394b PCI adapter and is based on the new Texas Instruments TSB83AA23 chipset. Note: This device is a FFF replacement for the CS-UNI-1226 device.RedHawk Server Linux is supplied with the basic OHCI IEEE 1394 driver. An RIQ is required for any additonal Firewire device type support (i.e. Storage Media, DV, Juju, etc)
 PCIUnibrainCS-UNI-1237Fireboard-800™V.3 is Unibrain’s new 1394b 64 bit PCI OHCI adapter and is based on the two main chips of Texas Instruments, TSB82AA2B (1394b OHCI-Lynx Controller) and TSB81BA3D (three-port bable TRANSCEIVER/ARBITTER PHY chip). Note: This device is a FFF replacement for the CS-UNI-1234 device.RedHawk Server Linux is supplied with the basic OHCI IEEE 1394 driver. An RIQ is required for any additonal Firewire device type support (i.e. Storage Media, DV, Juju, etc)
IRIG-BPCIeSpectracomCS-SP-TSYNC-PCIeSpectracom TSync-PCIe-000 1/2 Height PCIe IRIG Synchronized Time Code Processor with TCXO oscillator. Includes: 1- Full height PCIe adapter bracket; TSync-PCIe product manual, and programmers application guide; 1 - Basic Breakout cable: Inputs: 1 ea. IRIG AM , 1PPS, DCLS, GPI, Outputs: 1ea. IRIG AM, 1PPS, GPO. Supported Input Signals: 1ea. IRIG AM (BNC), 1 ea. 1PPS (BNC), 1 ea. DCLS (D Connector), 4 ea. GPI (General Purpose Inputs) (D Connector). Supported Output Signals: 1 each 1PPS output (BNC) (200ms pulse, rising edge on time point), 1 ea. 10 MHZ output (BNC), 1 ea. IRIG AM (BNC), 1 ea. DCLS (D Connector), 4 ea. GPO (General Purpose Outputs) (D Connector). Note: Select separate Premium Breakout cable Replacement (CS-SP-CAB000-05) for access to even more signals.
 PCIeSpectracomCS-SP-TSYNC-PCIeCSpectracom TSync-PCIe-300 (with Conformal Coating) 1/2 Height PCIe IRIG Synchronized Time Code Processor with TCXO oscillator. Includes: 1- Full height PCIe adapter bracket; TSync-PCIe product manual, and programmers application guide; 1 - Basic Breakout cable: Inputs: 1 ea. IRIG AM , 1PPS, DCLS, GPI, Outputs: 1ea. IRIG AM, 1PPS, GPO. Supported Input Signals: 1ea. IRIG AM (BNC), 1 ea. 1PPS (BNC), 1 ea. DCLS (D Connector), 4 ea. GPI (General Purpose Inputs) (D Connector). Supported Output Signals: 1 each 1PPS output (BNC) (200ms pulse, rising edge on time point), 1 ea. 10 MHZ output (BNC), 1 ea. IRIG AM (BNC), 1 ea. DCLS (D Connector), 4 ea. GPO (General Purpose Outputs) (D Connector). Note: Select separate Premium Breakout cable Replacement (CS-SP-CAB000-05) for access to even more signals.
 PCIeSpectracomCS-SP-TSYNC-PCIeCXSpectracom TSync-PCIe-310 (with Conformal Coating & Oven Controlled crystal oscillator) 1/2 Height PCIe IRIG Synchronized Time Code Processor with OCXO oscillator. Includes: 1- Full height PCIe adapter bracket; TSync-PCIe product manual, and programmers application guide; 1 - Basic Breakout cable: Inputs: 1 ea. IRIG AM , 1PPS, DCLS, GPI, Outputs: 1ea. IRIG AM, 1PPS, GPO. Supported Input Signals: 1ea. IRIG AM (BNC), 1 ea. 1PPS (BNC), 1 ea. DCLS (D Connector), 4 ea. GPI (General Purpose Inputs) (D Connector). Supported Output Signals: 1 each 1PPS output (BNC) (200ms pulse, rising edge on time point), 1 ea. 10 MHZ output (BNC), 1 ea. IRIG AM (BNC), 1 ea. DCLS (D Connector), 4 ea. GPO (General Purpose Outputs) (D Connector). Former p/n TSync-PCIe-OCXO-CC. Note: Select separate Premium Breakout cable Replacement (CS-SP-CAB000-05) for access to even more signals.Spectracom Optional oven-controlled crystal oscillator (OCXO) provides 2.0E-9 short term “tracking”, 5.0E-8 long term “loss of satellites” upgrade. ( Spectracom P/N Opt-OCXO )
 PCIeSpectracomCS-SP-TSYNC-PCIeXSpectracom TSync-PCIe-010 w/ Oven Controlled crystal oscillator; 1/2 Height PCIe IRIG Synchronized Time Code Processor with OCXO oscillator. Includes: 1- Full height PCIe adapter bracket; TSync-PCIe product manual, and programmers application guide; 1 - Basic Breakout cable: Inputs: 1 ea. IRIG AM , 1PPS, DCLS, GPI, Outputs: 1ea. IRIG AM, 1PPS, GPO. Supported Input Signals: 1ea. IRIG AM (BNC), 1 ea. 1PPS (BNC), 1 ea. DCLS (D Connector), 4 ea. GPI (General Purpose Inputs) (D Connector). Supported Output Signals: 1 each 1PPS output (BNC) (200ms pulse, rising edge on time point), 1 ea. 10 MHZ output (BNC), 1 ea. IRIG AM (BNC), 1 ea. DCLS (D Connector), 4 ea. GPO (General Purpose Outputs) (D Connector). Former p/n TSync-PCIe-OCXO-CC. Note: Select separate Premium Breakout cable Replacement (CS-SP-CAB000-05) for access to even more signals.This item has the Spectracom Optional oven-controlled crystal oscillator (OCXO) provides 2.0E-9 short term “tracking”, 5.0E-8 long term “loss of satellites” upgrade. ( Spectracom P/N Opt-OCXO )
 PCIeSpectracomCS-SP-TSYNC-PMC000PMC IRIG Synchronized Time Code Processor with TCXO oscillator. Includes: TSync-PMC product manual, and programmers application guide; 1 - Basic Breakout cable. Inputs: 1 ea. IRIG AM , 1PPS, DCLS, general purpose input; Outputs: 1ea. IRIG AM, 1PPS, general purpose output. Note: Select separate Premium Breakout cable Replacement (CS-SP-CAB000-05) for access to even more signals. (MFG P/N TSync-PMC-000)
 PCIeSpectracomCS-SP-TSYNC-PMC001PMC Internal GNSS (GPS+GLONASS) Satellite Synchronized Time Code Processor with TCXO oscillator. Includes: TSync-PMC product manual, and programmers application guide; 1 – Type N to SMA coaxial adapter cable (P/N# CA01R-0NSA-8001); 1- Basic Breakout cable. Inputs: 1 ea. IRIG AM , 1PPS, DCLS, general purpose input; Outputs: 1ea. IRIG AM, 1PPS, general purpose output. Note: Select separate Premium Breakout cable Replacement (CS-SP-CAB000-05) for access to even more signals. Antenna system sold separately. (MFG P/N TSync-PMC-001
 PCIeSpectracomCS-SP-TSYNC-PMC010PMC IRIG Synchronized Time Code Processor with OCXO oscillator option. Includes: TSync-PMC product manual, and programmers application guide; 1 - Basic Breakout cable. Inputs: 1 ea. IRIG AM , 1PPS, DCLS, general purpose input; Outputs: 1ea. IRIG AM, 1PPS, general purpose output. Note: Select separate Premium Breakout cable Replacement (CS-SP-CAB000-05) for access to even more signals. (MFG P/N TSync-PMC-010)
 PCIeSpectracomCS-SP-TSYNC-PMC011PMC Internal GNSS (GPS+GLONASS) Satellite Synchronized Time Code Processor with OCXO oscillator option. Includes: TSync-PMC product manual, and programmers application guide; 1 – Type N to SMA coaxial adapter cable (P/N# CA01R-0NSA-8001); 1- Basic Breakout cable. Inputs: 1 ea. IRIG AM , 1PPS, DCLS, general purpose input; Outputs: 1ea. IRIG AM, 1PPS, general purpose output. Note: Select separate Premium Breakout cable Replacement (CS-SP-CAB000-05) for access to even more signals. Antenna system sold separately. (MFG P/N TSync-PMC-011)
 PCIeSpectracomCS-SP-TSYNCE-PCIeSpectracom TSync-PCIE-002 1/2 Height PCIe External GNSS Synchronized Time Code Processor with TCXO oscillator. Includes: Full height PCIe adapter bracket; 1TSync-PCIe product manual, and programmers application guide; 1 - Basic Breakout cable: Inputs: 1 ea. IRIG AM , 1PPS, DCLS, GPI, Outputs: 1ea. 1PPS, IRIG AM, GPO; 1 - GNSS Antenna with 100’ of cable and mounting hardware. Supported Input Signals: 1ea. IRIG AM (BNC),1 ea. 1PPS (BNC), 1 ea. DCLS (D Connector), 4 ea. GPI (General Purpose Inputs) (D Connector). Supported Output Signals: 1 each 1PPS output (BNC), 1 ea. 10 MHZ output (BNC), 1 ea. IRIG AM (BNC), 1 ea. DCLS (D Connector), 4 ea. GPO (General Purpose Outputs) (D Connector). Note: Select separate Premium Breakout cable Replacement (CS-SP-CAB000-05) for access to even more signals. Former p/n TSyncE-PCIe.CS-SP-TSYNCE-PCIe comes with an external GPS antenna/receiver package and antenna cable.
 PCIeSpectracomCS-SP-TSYNCE-PCIeXSpectracom TSync-PCIE-012 1/2 Height PCIe External GNSS Synchronized Time Code Processor with OCXO oscillator. Includes: Full height PCIe adapter bracket; TSync-PCIe product manual, and programmers application guide; 1 - Basic Breakout cable: Inputs: 1 ea. IRIG AM , 1PPS, DCLS, GPI, Outputs: 1ea. 1PPS, IRIG AM, GPO; 1 - GNSS Antenna with 100’ of cable and mounting hardware. Supported Input Signals: 1ea. IRIG AM (BNC),1 ea. 1PPS (BNC), 1 ea. DCLS (D Connector), 4 ea. GPI (General Purpose Inputs) (D Connector). Supported Output Signals: 1 each 1PPS output (BNC), 1 ea. 10 MHZ output (BNC), 1 ea. IRIG AM (BNC), 1 ea. DCLS (D Connector), 4 ea. GPO (General Purpose Outputs) (D Connector). Note: Select separate Premium Breakout cable Replacement (CS-SP-CAB000-05) for access to even more signals. Former p/n TSyncE-PCIe-OCXO CS-SP-TSYNCE-PCIeX comes with an external GPS antenna/receiver package and antenna cable and has the Spectracom Optional oven-controlled crystal oscillator (OCXO) provides 2.0E-9 short term “tracking”, 5.0E-8 long term “loss of satellites” upgrade. ( Spectracom P/N Opt-OCXO )
 PCIeSpectracomCS-SP-TSYNCI-PCIeSpectracom TSync-PCIE-001 1/2 Height PCIe Internal GNSS Satellite Synchronized Time Code Processor with TCXO oscillator. Includes: 1 - Full height PCIe adapter bracket; TSync-PCIe product manual, and programmers application guide; 1 – Type N to SMA coaxial adapter cable (P/N# CA01R-0NSA-8001); 1 - Basic Breakout cable: Inputs: 1 ea. IRIG AM , 1PPS, DCLS, GPI, Outputs: 1ea. IRIG AM, 1PPS, GPO. Supported Input Signals: 1ea. IRIG AM (BNC), 1 ea. 1PPS (BNC), 1 ea. DCLS (D Connector), 4 ea. GPI (General Purpose Inputs) (D Connector). Supported Output Signals: 1 each 1PPS output (BNC) (200ms pulse, rising edge on time point), 1 ea. 10 MHZ output (BNC), 1 ea. IRIG AM (BNC), 1 ea. DCLS (D Connector), 4 ea. GPO (General Purpose Outputs) (D Connector). (GPS Antenna/cable NOT included - See CS-SP-ANT-8225 & CS-SP-CAL7100). Note: Select separate Premium Breakout cable Replacement (CS-SP-CAB000-05) for access to even more signals. Former p/n TSyncI-PCIeTSyncI-PCIe has an onboard GPS receiver compatible with the model 8225 GPS antenna and cable (sold separately).
 PCIeSpectracomCS-SP-TSYNCI-PCIeXSpectracom TSync-PCIE-011 1/2 Height PCIe Internal GNSS Satellite Synchronized Time Code Processor with OCXO oscillator. Includes: 1 - Full height PCIe adapter bracket; TSync-PCIe product manual, and programmers application guide; 1 – Type N to SMA coaxial adapter cable (P/N# CA01R-0NSA-8001); 1 - Basic Breakout cable: Inputs: 1 ea. IRIG AM , 1PPS, DCLS, GPI, Outputs: 1ea. IRIG AM, 1PPS, GPO. Supported Input Signals: 1ea. IRIG AM (BNC), 1 ea. 1PPS (BNC), 1 ea. DCLS (D Connector), 4 ea. GPI (General Purpose Inputs) (D Connector). Supported Output Signals: 1 each 1PPS output (BNC) (200ms pulse, rising edge on time point), 1 ea. 10 MHZ output (BNC), 1 ea. IRIG AM (BNC), 1 ea. DCLS (D Connector), 4 ea. GPO (General Purpose Outputs) (D Connector). (GPS Antenna/cable NOT included - See CS-SP-ANT-8225 & CS-SP-CAL7100). Note: Select separate Premium Breakout cable Replacement (CS-SP-CAB000-05) for access to even more signals. Former p/n TSyncI-PCIe-OCXOTSyncI-PCIe-OCXO has an onboard GPS receiver compatible with the model 8225 GPS antenna and cable (sold separately). Spectracom Optional oven-controlled crystal oscillator (OCXO) provides 2.0E-9 short term “tracking”, 5.0E-8 long term “loss of satellites” upgrade. ( Spectracom P/N Opt-OCXO )
 PCISpectracomCS-SP-TPRO-PCI-66USpectracom TPRO-PCI-66U IRIG-B Timecode Reader/Generator with PCI/PCI-X interface, Auto Detect Timecode Inputs, +/-1us Accuracy to Input, Zero Latency Time Reads, External Event Time Capture/Interrupt, Programmable Freq. Out/Interrupt, Programmable Alarm Output/Interrupt. -30C to +70C Operating Temp.No GPS or Antenna included.
 PCISpectracomCS-SP-TSAT-PCI-66USpectracom TSAT-PCI-66U GPS Timing Board / IRIG_B Reader/Generator with PCI/PCI-X interface, Auto Detect Timecode Inputs, +/-1us Accuracy to Input, Zero Latency Time Reads, External Event Time Capture/Interrupt, Programmable Freq. Out/Interrupt, Programmable Alarm Output/Interrupt. -30C to +70C Operating Temp.Includes mast mounted GPS receiver/antenna with 100' cable, with PVC vent pipe mast and metal straps.Includes 100' cable, Mount, and GPS Receiver/Antenna.
 PCISymmetricomCS-SYM-BC635PCE(Not Recommended for New Designs – See Spectracom products for fully supported alternative) Symmetricom/Microsemi BC635PCIe PCIe x1 IRIG-B Time Code Device card. Support Note: Vendor Driver is a BInary Only JUNGO driver. Concurrent Real-Time cannot directly support this driver in any way. Any issues will be reported to Microsemi. REQUIREMENTS: Available for RedHawk Releases 6.5, 7.0, 7.2 and 7.3 with applicable NRE.. See CS-SP-TSYNC products for alternative device. This device comes with a Binary only driver that is not supported by Concurrent Real-Time directly. Concurrent cannot guarantee any effective response to driver issues that may occur.
 PCISymmetricomCS-SYM-BC635PCI-U(Not Recommended for New Designs – See Spectracom products for fully supported alternative) Symmetricom BC635PCI-U IRIG-B Time Code Device card. Universal PCI. REQUIRES: RedHawk 5.4 or OLDER releases. Driver not valid with newer versions of RedHawk.See CS-SP-TSYNC products for alternative device. This device comes with a Binary only driver that is not supported by Concurrent Real-Time directly. Concurrent cannot guarantee any effective response to driver issues that may occur.
 PCISymmetricomCS-SYM-BC635PCI-V2(Not Recommended for New Designs – See Spectracom products for fully supported alternative) Symmetricom BC635PCI-V2 IRIG-B Time Code Device card. Universal PCI. IRIG A, B, G, E, IEEE 1344, NASA 36, XR3 & 2137 Time Code Inputs and Outputs, 1, 5, or 10 MHz Rate Generator Output, Simultaneous AM or DCLS Time Code Inputs and Outputs. REQUIRES: RedHawk 5.4 or OLDER releases. Driver not valid with newer versions of RedHawk.See CS-SP-TSYNC products for alternative device. This device comes with a Binary only driver that is not supported by Concurrent Real-Time directly. Concurrent cannot guarantee any effective response to driver issues that may occur.
 CableSpectracomCS-SP-CAB000-05 Premium Replacement Breakout Cable for the CS-SP-TSYNCx cards that supports the following: Input Signals: 1ea. IRIG AM (BNC), 1 ea. 1PPS (BNC), 1 ea. DCLS (D Connector), 4 ea. GPI (General Purpose Inputs) (D Connector). Output Signals: 1 ea. IRIG AM (BNC), 1 each 1PPS Output (BNC), 1 ea. 10 MHZ Output (BNC), 1 ea. DCLS (D Connector), 4 ea. GPO (General Purpose Outputs) (D Connector). Vendor p/n CA08R-0000-0005. Spectracom boards purchased prior to 2014 will require use of the CS-SP-CADDMD6-01 Cable Adapter. This item replaces the Basic Cable when purchased with a new board.Cable only.
 CableSpectracomCS-SP-CAB000-06Basic Replacement Breakout Cable for the CS-SP-TSYNCx cards that supports the following: Input Signals: 1ea. IRIG AM (BNC), 1 ea. 1PPS (BNC), 1 ea. DCLS (D Connector), 1 ea. GPI (General Purpose Input) (D Connector). Output Signals: 1 ea. IRIG AM (BNC), 1 ea. 1PPS (BNC), 1 ea. GPO (General Purpose Output) (D Connector). (Vendor p/n CA08R-0000-0006). Spectracom boards purchased prior to 2014 will require use of the CS-SP-CADDMD6-01 Cable Adapter.Cable only.
 CableSpectracomCS-SP-CADDMD6-01Replacement Adapter Cable for breakout cables for the CS-SP-TSYNCx devices. 6 in, 26p high density D-sub to 25p micro D-sub. This adapter is used in conjunction with the breakout cable models CS_SP-CAB-000-05 & CS-SP-CAB000-06 when using old style cards purchased prior to 2014. (Vendor p/n CA08R-DMD6-0001)Cable only.
 CableSpectracomCS-SP-CAL7100Spectracom 100Ft GPS Antenna Cable Terminated With Type N Connectors. For use with CS-SP-ANT-8225 GPS Antenna and for the CS-SP-TSYNCI-PCIe adapter.Cable only.
 AccessorySpectracomCS-SP-ANT-8224Spectracom GPS Antenna Splitter is a one input, two output power divider. Type N connectors on input and output ports. (Note: Be sure to order two other cables to create a "T".) P/N 8224-2Antenna Splitter Only - Be sure to order two other cables to create a "T".
 AccessorySpectracomCS-SP-ANT-8224-DCSpectracom GPS Antenna Splitter 1x2 w/ DC Input. (Note: Be sure to order two other cables to create a "T".) P/N 8224-2-DCAntenna Splitter Only - Be sure to order two other cables to create a "T".
 AccessorySpectracomCS-SP-ANT-8225Spectracom mast mounted GPS Antenna Only (No Receiver). Uses CS-SP-CAL700 Cable for the CS-SP-TSYNCI-PCIe device.Antenna Only - Receiver is not contained within this Antenna.
LVDT/RVDTPCINAICS-NA-76CL1-06-95( **EOL** LAST TIME BUY, MAY 1st, 2017) NAII 76CL1-006CLO-95 PCI Full Size LVDT device w/ 6-D/L Simulation Output channels only, No Excitation, 5KHz Frequency 0C to +70C. *Extended Lead Times 20 weeks.It is strongly suggested that you contact your salesman to ensure that this board will meet the requirements of your application.
 PCINAICS-NA-76CL1-26-05( **EOL** LAST TIME BUY, MAY 1st, 2017) NAII 76CL1-026CL1-05 PCI Full Size RVDT 6-Channel two measurement channels, on-board reference signal 2-28VRMS Output. *Extended Lead Times 20 weeks.It is strongly suggested that you contact your salesman to ensure that this board will meet the requirements of your application.
 PCINAICS-NA-76CL1-44-04( **EOL** LAST TIME BUY, MAY 1st, 2017) NAII 76CL1-044CLA-04 PCI Full Size LVDT device w/ 4-D/L Simulation Output channels, 4-L/D Measurement Input Channels, 2-28VRMS Excitation Output, 2.69KHz Excitation Frequency. *Extended Lead Times 20 weeks.It is strongly suggested that you contact your salesman to ensure that this board will meet the requirements of your application.
 PCINAICS-NA-76CL1-80-85( **EOL** LAST TIME BUY, MAY 1st, 2017) NAII 76CL1-080CLA-85 PCI Full Size LVDT device w/ 0-D/L Simulation Output channels, 8-L/D Measurement Input Channels, 0° to 70°C, On-board Reference 2-28VRMS Output, No Encoder/Commutation Option, 85= LD: CH1 to 8 = 2-28V, 10kHz Frequency. *Extended Lead Times 20 weeks.It is strongly suggested that you contact your salesman to ensure that this board will meet the requirements of your application.
 PCINAICS-NA-76CL1-86-04( **EOL** LAST TIME BUY, MAY 1st, 2017) NAII 76CL1-086CLA-04 LVDT device w/ 6-D/L Simulation Output channels, 8-L/D Measurement Input Channels, 2-28VRMS Excitation Output, 2.69KHz Excitation Frequency. *Extended Lead Times 20 weeks.It is strongly suggested that you contact your salesman to ensure that this board will meet the requirements of your application.
 PCINAICS-NA-76CL1-86-95( **EOL** LAST TIME BUY, MAY 1st, 2017) NAII 76CL1-086CLA-95 PCI Full Size LVDT device w/ 6-D/L Simulation Output channels, 8-L/D Measurement Input Channels, 2-28VRMS Excitation Output, 5KHz Excitation Frequency. (Customer to specify the default power-on excitation voltage and frequency before purchase. Failure to specify this will result in delayed shipment.) *Extended Lead Times 20 weeks.It is strongly suggested that you contact your salesman to ensure that this board will meet the requirements of your application.
MIL-STD-1553PCIeDDCCS-DD-67106K-100RDDC BU-67106K-100R-JLO (Single Function) PCIe (x1) MIL-STD-1553 device. Single dual redundant MIL-STD-1553 channels operating modes are BC/Monitor or Multi-RT/Monitor. The card also contains software configurable bus coupling and termination options, eight digital discrete I/Os, eight avionics (+35V) Discrete I/Os, IRIG-B Time Code Input/Output, and a Time Tag Clock Input/Output. Breakout Adapter cable is included. Commercial Temp.Supported by RedHawk and SimWB.
 PCIeDDCCS-DD-67106K-200RDDC BU-67106K-200R-JLO PCIe (x1) MIL-STD-1553 device. Two dual redundant MIL-STD-1553 channels operating modes are BC/Monitor or Multi-RT/Monitor. Each mode has the ability to run a concurrent Bus Monitor (MT). The card also contains software configurable bus coupling and termination options, eight digital discrete I/Os, eight avionics (+35V) Discrete I/Os, IRIG-B Time Code Input/Output, and a Time Tag Clock Input/Output. Breakout Adapter cable is included. Commercial Temp.Supported by RedHawk and SimWB.
 PCIeDDCCS-DD-67106K-400RDDC BU-67106K-400R-JLO PCIe (x1) MIL-STD-1553 device. Four dual redundantMIL-STD-1553 channels operating modes are BC/Monitor or Multi-RT/Monitor.The card also contains software configurable bus coupling and termination options, eight digital discrete I/Os, eight avionics (+35V) Discrete I/Os, IRIG-B Time Code Input/Output, and a Time Tag Clock Input/Output. Breakout Adapter cable is included. Commercial Temp.Supported by RedHawk and SimWB.
 PCIeDDCCS-DD-67112Y-41DDC BU-67112Y410L-2A0 PCIe (x4) (XMC on a PCIe Carrier) - MIL-STD-1553 device. Four dual redundant MIL-STD-1553 channels Single Function - Supports MIL-STD-1553A/B and MIL-STD-1760, - BC Disable for RT Only Applications, - Tx Inhibit for MT Only Applications, - IRIG-106 Chapter 10 MIL-STD-1553 Bus Monitor, 16 Avionics Discrete I/O - Operating Temp. -40°C to +85°C Air Cooled. DDC p/n BU-67112Y410L-2A0 + Carrier p/n DynEng - PCIe4LXMCX1 (Breakout cable Sold Separately CS-DD-75530-6 )
 PCIeDDCCS-DD-67112Y-81DDC BU-67112Y810L-2A0 PCIe (x4) (XMC on a PCIe Carrier) - MIL-STD-1553 device. Eight dual redundant MIL-STD-1553 channels Single Function - Supports MIL-STD-1553A/B and MIL-STD-1760, - BC Disable for RT Only Applications, - Tx Inhibit for MT Only Applications, - IRIG-106 Chapter 10 MIL-STD-1553 Bus Monitor, 16 Avionics Discrete I/O - Operating Temp. -40°C to +85°C Air Cooled. DDC p/n BU-67112Y810L-2A0 + Carrier p/n DynEng - PCIe4LXMCX1 (Breakout cable Sold Separately CS-DD-75767-1)
 PCIeDDCCS-DD-67206K-100RDDC BU-67206K-100R-JLO (Multi-Function) PCIe (x1) MIL-STD-1553 device. Single dual redundant MIL-STD-1553 channels. Multi-Function: BC + Multi-RT + Monitor. Enhanced features, Onboard DMA Engine, Bridgeless PCIe Design, MIS Interrupts. PCIe x1 form factor. Test and Simulation Toolkit: Error Injection, Variable Voltage Output, Advanced Triggering. The card also contains software configurable bus coupling and termination options, eight digital discrete I/Os, eight avionics (+35V) Discrete I/Os, IRIG-B Time Code Input/Output, and a Time Tag Clock Input/Output. Breakout Adapter cable is included. Commercial Temp.Supported by RedHawk and SimWB.
 PCIeDDCCS-DD-67206K-200RDDC BU-67206K-200R-JLO (Multi-Function) PCIe (x1) MIL-STD-1553 device. Two dual redundant MIL-STD-1553 channels. Multi-Function: BC + Multi-RT + Monitor. Enhanced features, Onboard DMA Engine, Bridgeless PCIe Design, MIS Interrupts. PCIe x1 form factor. Test and Simulation Toolkit: Error Injection, Variable Voltage Output, Advanced Triggering. The card also contains software configurable bus coupling and termination options, eight digital discrete I/Os, eight avionics (+35V) Discrete I/Os, IRIG-B Time Code Input/Output, and a Time Tag Clock Input/Output. Breakout Adapter cable is included. Commercial Temp.Supported by RedHawk and SimWB.
 PCIeDDCCS-DD-67206K-400RDDC BU-67206K-400R-JLO (Multi-Function) PCIe (x1) MIL-STD-1553 device. Four dual redundant MIL-STD-1553 channels. Multi-Function: BC + Multi-RT + Monitor. Enhanced features, Onboard DMA Engine, Bridgeless PCIe Design, MIS Interrupts. PCIe x1 form factor. Test and Simulation Toolkit: Error Injection, Variable Voltage Output, Advanced Triggering. The card also contains software configurable bus coupling and termination options, eight digital discrete I/Os, eight avionics (+35V) Discrete I/Os, IRIG-B Time Code Input/Output, and a Time Tag Clock Input/Output. Breakout Adapter cable is included. Commercial Temp.Supported by RedHawk and SimWB.
 PCIeDDCCS-DD-75530-6MIL-STD-1553 Breakout Adapter Cable for the CS-DD-67112Y-41 XMC PCIe 1553 Device (4 channels) . (DDC P/N DDC-75530-6)
 PCIeDDCCS-DD-75767-1MIL-STD-1553 Breakout Adapter Cable for the CS-DD-67112Y-81 XMC PCIe 1553 Device (8 channels) . (DDC P/N DDC-75767-1)
 PCIeDDCCS-DD-76195-1MIL-STD-1553 Breakout Adapter Cable for the CS-DD-67206K-100R. This item is for replacement of the adapter included with the I/O device. (DDC P/N DDC-76195-1) Supported by RedHawk and SimWB.
 PCIeDDCCS-DD-76195-2MIL-STD-1553 Breakout Adapter Cable for the CS-DD-67206K-200R. This item is for replacement of the adapter included with the I/O device. (DDC P/N DDC-76195-2) Supported by RedHawk and SimWB.
 PCIeDDCCS-DD-76195-4MIL-STD-1553 Breakout Adapter Cable for the CS-DD-67206K-400R. This item is for replacement of the adapter included with the I/O device. (DDC P/N DDC-76195-4) Supported by RedHawk and SimWB.
 PCIDDCCS-DD-65569I1-300MIL-STD-1553 w/ 1 Dual Redundant Device - Enhanced mini-ace supports BC/RT/MT bus functions. Note - This is an older design board. See CS-DD-671X06-XXXX for current design 1553 devices. (DDC p/n BU65569I1-300)
 PCIDDCCS-DD-65569I2-300MIL-STD-1553 w/ 2 Dual Redundant Devices - Enhanced mini-ace supports BC/RT/MT bus functions. Each channel may be independently programmed for BC/RT/Monitor or RT/Monitor mode. Note - This is an older design board. See CS-DD-671X06-XXXX for current design 1553 devices. (DDC p/n BU65569I2-300)
 PCIDDCCS-DD-65569I3-300MIL-STD-1553 w/ 3 Dual Redundant Devices - Enhanced mini-ace supports BC/RT/MT bus functions. Each channel may be independently programmed for BC/RT/Monitor or RT/Monitor mode. Note - This is an older design board. See CS-DD-671X06-XXXX for current design 1553 devices. (DDC p/n BU65569I3-300)
 PCIDDCCS-DD-65569I4-300MIL-STD-1553 w/ 4 Dual Redundant Devices - Enhanced mini-ace supports BC/RT/MT bus functions. Each channel may be independently programmed for BC/RT/Monitor or RT/Monitor mode. Note - This is an older design board. See CS-DD-671X06-XXXX for current design 1553 devices. (DDC p/n BU65569I4-300)
NetworkPCIeIntelCS-INT-E1G44ET2(Std. Profile) Intel Gigabit ET2 Quad Port Server Adapter - Network adapter - PCIe - 10Mb LAN, 100Mb LAN, Gigabit LAN - 10Base-T, 100Base-TX, 1000Base-T - 4 ports - Replaces CS-INT-EXPI9404PT. May not be supported on motherboards that have on-board Intel 82576 Gigabit Ethernet controllers
 PCIeIntelCS-INT-E1G44ET2L(Low Profile) Intel Gigabit ET2 Quad Port Server Adapter - Network adapter - PCIe - 10Mb LAN, 100Mb LAN, Gigabit LAN - 10Base-T, 100Base-TX, 1000Base-T - 4 ports - Replaces CS-INT-EXPI9404PTLMay not be supported on motherboards that have on-board Intel 82576 Gigabit Ethernet controllers
 PCIeIntelCS-INT-X550-T2(Low Profile) Intel 10Gbs Dual Port RJ45 PCIe 3.0 x4 NIC Card for Intel - X550-T2 Storage Protocols: iSCSI, FCoE, NFS (Intel p/n X550-T2)May not be supported on motherboards that have on-board Intel 82576 Gigabit Ethernet controllers
 PCIeIntelCS-INT-X710-DA2(Low Profile) Intel Ethernet Converged Network Adapter X710-DA2 - PCI Express 3.0 x8 - 2 Port(s) 10/1GbE - Storage Protocols: NFS, iSCSI Twinaxial (Intel p/n X710-DA2)May not be supported on motherboards that have on-board Intel 82576 Gigabit Ethernet controllers
 PCIeIntelCS-INT-XL710-DA2(Low Profile) Intel XL710QDA2 Ethernet Converged Network Adapters XL710 2-ports 10/40 GbE PCI Express 3.0 x8 Storage Protocols: NFS, iSCSI (Intel p/n XL710-QDA2)May not be supported on motherboards that have on-board Intel 82576 Gigabit Ethernet controllers
 PCIOreganoCS-OR-SYN1588-PCIeOregano Systems syn1588 PCIe x1 NIC is a PCI Express Gbit network interface card with IEEE1588 hardware support. Single 10/100/1000 Mbit Port, Master and Slave capable PTP Node, IEEE1588 hardware timestamping. Half Height
 PMCGECS-GE-PMC677RCTXEOL***Last Time Buy 11/29/2019***** PMC677RCTX is a Quad-Port Ethernet PMC device. Support 10/100/1000BaseT, 64KB FIFO Buffers. RoHS Compliant, 3.3V Signaling, Pluggable copper transceivers, PCI-X/PCI 64bit/66Mhz bus compatible.10-Weeks ARO - Driver is included with RedHawk Server Linux
 CableMellanoxCS-ME-2206310-0033 Meter 40GB/S Infiniband-QSFP Op Cable 850nm, MMF, 3m (MC2206310-003) for the CS-ME-MCX35x
 CableMellanoxCS-ME-2206310-03030 Meter 40GB/S Infiniband-QSFP Op Cable 850nm, MMF, 30m (MC2206310-030) for the CS-ME-MCX35x
 CableMellanoxCS-ME-2207130-0022 Meter Mellanox passive copper Cable, VPI, up to 56Gb/s, QSFP, 2m (MC2207130-002 ) for the CS-ME-MCX35x
 CableMellanoxCS-ME-220731V-030 30 Meter Mellanox passive copper Cable, VPI, up to 56Gb/s, QSFP, 30m (MC220731V-030) for the CS-ME-MCX35x
 CableMellanoxCS-ME-2210130-0022 Meter Mellanox passive copper Cable, Ethernet 40GbE, 40Gb/s, QSFP (MC2210130-002) for the CS-ME-MCX35x
 CableMellanoxCS-ME-C003E26N3 Meter Mellanox MCP1600-C003E26N Passive Copper Cable ETH 100GbE QSFP28 3m Black 26AWG CA-N (MCP1600-C003E26N) for the CS-ME-MCX555-ECAT
 CableMellanoxCS-ME-MCX353A-FCBT( **EOL** LAST TIME BUY, DEC 1st, 2019) Mellanox ConnectX-3 VPI - Network adapter - PCI Express 3.0 x8 - Single-Port QSFP FDR InfiniBand and 40/56GbE PCIe3.0 x8 8GT/s RoHS (MCX353A-FCBT)Driver included with purchase of RedHawk Linux 6.5 or later.
 CableMellanoxCS-ME-MCX353A-QCBT( **EOL** LAST TIME BUY, DEC 1st, 2019) Mellanox ConnectX-3 VPI - Network adapter - PCI Express 3.0 x8 - Single-Port QSFP QDR InfiniBand and 10GbE PCIe3.0 x8 8GT/s RoHS (MCX353A-QCBT)Driver included with purchase of RedHawk Linux 6.5 or later.
 CableMellanoxCS-ME-MCX354A-FCBT( **EOL** LAST TIME BUY, DEC 1st, 2019) Mellanox ConnectX-3 VPI - Network adapter - PCI Express 3.0 x8 - Dual-Port QSFP FDR InfiniBand and 40/56GbE PCIe3.0 x8 8GT/s RoHS (MCX354A-FCBT)Driver included with purchase of RedHawk Linux 6.5 or later.
 CableMellanoxCS-ME-MCX354A-QCBTMellanox ConnectX-3 VPI - Network adapter - PCI Express 3.0 x8 - Dual-Port QSFP QDR InfiniBand and 10GbE PCIe3.0 x8 8GT/s RoHS(MCX354A-QCBT)Driver included with purchase of RedHawk Linux 6.5 or later.
 CableMellanoxCS-ME-MCX555A-ECATMellanox ConnectX®-5 VPI adapter card, FDR/EDR IB (100Gb/s) and 40/50/100GbE, single-port QSFP28, PCIe3.0 x16, tall bracket RoHS (MCX555A-ECAT) - Compatible with cable (CS-ME-C003E26N)Driver included with purchase of RedHawk Linux 6.5 or later.
 CableMellanoxCS-ME-MCX556A-ECATMellanox ConnectX®-5 VPI adapter card, FDR/EDR IB (100Gb/s) and 40/50/100GbE, dual-port QSFP28, PCIe3.0 x16, tall bracket RoHS (MCX556A-ECAT) - Compatible with cable (CS-ME-C003E26N)Driver included with purchase of RedHawk Linux 6.5 or later.
Pulse Width ModulationPCIeConcurrentCP-PWM-1012The CP-PWM-1012 autonomously generates TTL pulse width modulated (PWM) signals with high accuracy. With a timing resolution of 50 ns and the ability to program sine frequencies, PWM frequencies, dead-band and duty cycle in real time, the CP-PWM-1012 card is ideal for use in hardware-in-the-Loop (HIL) systems. Provides 12 digital output lines with 5V TTL output (TI 74ABT16240 driver). The card features 34K logical FPGA elements and high-speed PLL-generated clocks at 100 MHz++. Multiple cards are supported per system. Occupies a PCIe x1 slot or higher. Supported by SIMulation Workbench. (Cable: CX-LFH60-OUT / CX-LFH60-OUT-DIN))Supported by RedHawk and SimWB
 PCIeConcurrentCP-PWM-1112Concurrent's 12-line Pulse Width Modulation (PWM) PCIe input card is designed for capturing pulse width modulated signals with high accuracy. With a timing resolution of 15.15 nanoseconds and the ability to measure the frequency and duty cycle, the CP-PWM-1112 is ideal for use in hardware-in-the-loop (HIL) applications. The CP-PWM-1112 card has 12 digital input lines with 5V TTL input (74LVCH16240 driver). The card features 34K logical FPGA elements and high-speed PLL-generated clocks at 100 MHz++. Multiple cards are supported per system. The CP-PWM-1112 card occupies a PCIe x1 slot or higher and is fully supported by a RedHawk Linux driver. The card is also supported by Concurrent's Simulation Workbench. (Cable: CX-LFH60-IN / CX-LFH60-IN-DIN)

Supported by RedHawk and SimWB
 PCIeConcurrentCP-PWM-1204Concurrent's Wheel Speed Sensor card provides 4 output channels that can simulate wheel speed sensors up to 127 teeth. Card output is TTL with a resolution of 15 nanoseconds. (Cable: CX-LFH60-OUT / CX-LFH60-OUT-DIN)

Supported by SimWB
Reflective MemoryPCIeGECS-GE-PCE-5565-100Abaco PCIe-5565PIORC-100A00 - PCI Express, 2 GIGA Baud RM w/FO Options, 128 Mbyte Memory, Multimode Transmission. Short bracket option configuration of this card is available upon request. (NOTE: This item has an extended lead time of 12-14 Weeks) Supported by RedHawk and SimWB.
 PCIeGECS-GE-PCE-5565-10LAbaco PCIe-5565PIORC-100000 - Low-Profile PCI Express, 2 GIGA Baud RM w/FO Options, 128 Mbyte Memory, Multimode Transmission. Short bracket option (low profile) configuration. (NOTE: This item has an extended lead time of 12-14 Weeks) Supported by RedHawk and SimWB.
 PCIeGECS-GE-PCE-5565-200Abaco PCIe-5565PIORC-200A00 - PCI Express, 2 GIGA Baud RM w/FO Options, 256 Mbyte Memory, Multimode Transmission. Short bracket option configuration of this card is available upon request. (NOTE: This item has an extended lead time of 12-14 Weeks) Supported by RedHawk and SimWB.
 PCIeGECS-GE-PCE-5565-20LAbaco PCIe-5565PIORC-200000 - Low-Profile PCI Express, 2 GIGA Baud RM w/FO Options, 256 Mbyte Memory, Multimode Transmission. Short bracket option (low profile) configuration. (NOTE: This item has an extended lead time of 12-14 Weeks) Supported by RedHawk and SimWB.
 PCIeSystranCS-SYS-GPCIE-20SCRAMNet GT200 (PCIe x4 Compatible) 3.3V PMC 128MB Dual Port Reflective Memory on a PCIE x4 Carrier, 210 MB/sec data throughput for large data transfers. NOTE: License is included with purchase of GT200 Hardware. (CW Model H-AS-GPM128SC-20 + CCRT Model CS-GS-PMC2PCIE4)
 PCIDolphinCS-DO-IXC1MDolphin Inc.IXC1M 1 Meter iPass Copper Cable for the CS-DO-IXHx610 / PXH810 Series products.
 PCIDolphinCS-DO-IXC2MDolphin Inc.IXC2M 2 Meter iPass Copper Cable for the CS-DO-IXHx610 / PXH810 Series products.
 PCIDolphinCS-DO-IXC5MDolphin Inc.IXC5M 5 Meter iPass Copper Cable for the CS-DO-IXHx610 / PXH810 Series products.
 PCIDolphinCS-DO-IXH610Dolphin Inc. IXH610: PCIe Gen2 NTB Host Adapter The Dolphin Express IXH610 is based on a Gen2 PCI Express non-transparent bridging architecture. This low profile PCI Express x8 adapter card provides 40 Gbits/s performance over a standard PCIe external cabling system. The IXH610 features non-transparent bridging. Up to two cards may be used in a single system. Inter-processor connections require the CS-DO-IXS600 Switch. (Requires purchase of an iPass cable - See CS-DO-IXCXX Copper cable above.)
 PCIDolphinCS-DO-IXS600Dolphin Inc. IXS600: Gen3 PCIe Switch Box - Dolphin’s IXS600 High Speed PCIe switch delivers with a powerful and flexible PCI Express solution. This Gen3 PCI Express switch supports I/O expansion and high throughput clustering by combining Gen3 x8 PCI Express speeds of 64Gbps with Dolphin’s clustering technology and IDT’s standard transparent bridging capabilities. Required for inter-processor connections.
 PCIDolphinCS-DO-MSC01MDolphin Inc.MSC1M: 1 meter x4 Mini SAS HD copper Cable PCIe x4 speeds - up to four (4) cables may be used for the CS-DO-PXH830 NTB Host Adapter.
 PCIDolphinCS-DO-MSC02MDolphin Inc.MSC2M: 2 meter x4 Mini SAS HD copper Cable PCIe x4 speeds - up to four (4) cables may be used for the CS-DO-PXH830 NTB Host Adapter.
 PCIDolphinCS-DO-MSC04MDolphin Inc.MSC4M: 4 meter x4 Mini SAS HD copper Cable PCIe x4 speeds - up to four (4) cables may be used for the CS-DO-PXH830 NTB Host Adapter.
 PCIDolphinCS-DO-MSC09MDolphin Inc.MSC9M: 9 meter x4 Mini SAS HD copper Cable PCIe x4 speeds - up to four (4) cables may be used for the CS-DO-PXH830 NTB Host Adapter.
 PCIDolphinCS-DO-MSFC100MDolphin Inc.MSFC100M: 100meter x4 Fiber Mini SAS HD Cable PCIe x4 speeds - up to four (4) cables may be used for the CS-DO-PXH830 NTB Host Adapter.
 PCIDolphinCS-DO-MXS824Dolphin Inc.MXS824: 1U SWITCH -24 Port PCI Express Gen3. 24 PCI Express Gen3 x4 PORTS, Gen3 8.0 GT/S per lane, x4 MiniSAS-HD cable Connections Copper cables - up to 5 meters at Gen3 speed Fiber-Optic cable support- up to 100 meters (100 Meter Support requires Home Office Quote). Requires purchase of one or more CS-DO-MSCXXM x4 MiniSAS-HD cables as required by application.
 PCIDolphinCS-DO-PXH810Dolphin Inc.PXH810: Gen3 PCIe NTB Host Adapter The PXH810 Gen3 PCI Express NTB(Non-Transparent Bridge) Host Adapter is our high performance cabled interface for distributed processor subsystems and I/O expansion applications. The host adapter extends PCI Express over cables to external systems. Up to two cards may be used in a single system. Inter-processor connections require the CS-DO-IXS600 Switch. (Requires purchase of an iPass cable - See CS-DO-IXCXX Copper cable above.)
 PCIDolphinCS-DO-PXH830Dolphin Inc.PXH830: Gen3 PCIe NTB Host Adapter The PXH830 Gen3 PCI Express NTB(Non-Transparent Bridge) Host Adapter is our high performance cabled interface for distributed processor subsystems and I/O expansion applications. The host adapter extends PCI Express over cables to external systems. Up to two cards may be used in a single system. Specs: x16 Gen3 PCI Express host port, 4x SFF-8644 Gen3 PCI Express cable ports, 32 Gbit/s per port, total 128 Gbit/s performance Host Clock Isolation (SSC + CFC) Inter-processor connections require the CS-DO-MXS824 Switch. Requires purchase miniSAS-HD x4 cables ( CS-DO-MSCXXM) in quanties as required by the application. Up to 4x CS-DO-MSCXXM miniSAS-HD cables are supported by this board providing x16 speeds.
 PCIGECS-GE-PCI-5565-110Abaco PCI-5565PIORC-110000 - PCI 128 MB Fiber-Optic Reflective Memory w/4Kb FIFO/Multimode. (Replaces CS-VMIPCI-5565-010) (NOTE: This item has an extended lead time of 12-14 Weeks) 6 Weeks ARO - Supported by RedHawk and SimWB.
 PCIGECS-GE-PCI-5565-210PCI-5565PIORC-210000 - PCI 256 MB Fiber-Optic Reflective Memory w/4Kb FIFO/Multimode. (Replaces CS-VMIPCI-5565-020) 6 Weeks ARO - Supported by RedHawk and SimWB.
 PCISystranCS-SYS-DPCIG02M-20 EOL - ORDER BEFORE 7/31/2017 SCRAMNet+ SC150e Network Device 2MB SCRAMNet PCI Reflective Memory Curtis Wright requires purchase of CS-SYS-LIPCPC2S Hardware License for use with this product.
 PCISystranCS-SYS-DPCIG04M-20 EOL - ORDER BEFORE 7/31/2017 SCRAMNet+ SC150e Network Device 4MB SCRAMNet PCI Reflective MemoryCurtis Wright requires purchase of CS-SYS-LIPCPC2S Hardware License for use with this product.
 PCISystranCS-SYS-DPCIG08M-20 EOL - ORDER BEFORE 7/31/2017 SCRAMNet+ SC150e Network Device 8MB SCRAMNet PCI Reflective Memory Curtis Wright requires purchase of CS-SYS-LIPCPC2S Hardware License for use with this product.
 PCISystranCS-SYS-GPCI-20SCRAMNet GT200 3.3V Only PCI 128MB Dual Port Reflective Memory, 210 MB/sec data throughput for large data transfers. This card requires a 3.3V Compatible PCI slot. For 5V PCI slots use CS-SYS-GPCI5V-20. NOTE: License is included with purchase of GT200 Hardware.
 PCISystranCS-SYS-GPCI-30SCRAMNet GT200 3.3V Only PCI 128MB Dual Port Reflective Memory, 210 MB/sec data throughput for large data transfers. Single Mode 9/125um suitible for long distances (up to 10km) This card requires a 3.3V Compatible PCI slot. Not compatible with 5V Only PCI slot locations. NOTE: License is included with purchase of GT200 Hardware. (Curtiss Wright p/n H-AS-GPC128SC-30)
 PCISystranCS-SYS-GPCI5V-20SCRAMNet GT200 5V PCI 128MB Dual Port Reflective Memory, up to 90 MB/sec* data throughput for large data transfers. This card is a PMC device mounted on a PCI 5V compatible carrier card. For a native 3.3V only PCI version of the GT200, please order CS-SYS-GPCI-20. NOTE: License is included with purchase of GT200 Hardware. (CW Model H-AS-GC5128SC-20 &GS p/n: PCI to PMC Adapter) *Data throughput may be limited due to PCI 5V 33MHz bus and PCI Bridge constraints.
 PCISystranCS-SYS-GPMC-30SCRAMNet GT200 3.3V Only PMC 128MB Dual Port Reflective Memory, 210 MB/sec data throughput for large data transfers. Single Mode 9/125um suitable for long distances (up to 10km) This card requires a 3.3V Compatible PCI slot. Not compatible with 5V Only PCI slot locations NOTE: License is included with purchase of GT200 Hardware. (Curtiss Wright p/n H-AS-GPM128SC-30) You may use this device in conjunction with a bridged PCIE to PMC carrier card if PCIe is required.
 PMCGECS-GE-PMC-5565-110GE PMC-5565PIORC-110000 - PMC 128 MB Fiber-Optic Reflective Memory w/4Kb FIFO/Multimode. (NOTE: This item has an extended lead time of 12-14 Weeks) 6 Weeks ARO - Supported by RedHawk and SimWB.
 PMCGECS-GE-PMC-5565-111GE PMC-5565PIORC-111000 - PMC 128 MB Fiber-Optic Reflective Memory w/4Kb FIFO/Single Mode. (NOTE: This item has an extended lead time of 12-14 Weeks) 14 Weeks ARO - Supported by RedHawk and SimWB.
 PMCGECS-GE-PMC-5565-210GE PMC-5565PIORC-210000 - PMC 256 MB Fiber-Optic Reflective Memory w/4Kb FIFO/Multimode. (NOTE: This item has an extended lead time of 12-14 Weeks) 6 Weeks ARO - Supported by RedHawk and SimWB.
 PMCGECS-GE-PMC-5565-211GE PMC-5565PIORC-211000 - PMC 256 MB Fiber-Optic Reflective Memory w/4Kb FIFO/Single Mode. (NOTE: This item has an extended lead time of 12-14 Weeks) 14 Weeks ARO - Supported by RedHawk and SimWB.
 PMCSystranCS-SYS-DPMCG02M-20 EOL - ORDER BEFORE 7/31/2017 SCRAMNet+ SC150e Network Device 2MB SCRAMNet PMC Reflective Memory - NOTE: DMA Performance will be reduced when this card is used in conjuntion with PCI or PCIe Carrier device. (This device will not work with PCIe x4 Carrier cards - Use PCIe x1 Carrier cards only. )Curtis Wright requires purchase of CS-SYS-LIPCPC2S Hardware License for use with this product.
 PMCSystranCS-SYS-DPMCG04M-20 EOL - ORDER BEFORE 7/31/2017 S SCRAMNet+ SC150e Network Device 4MB SCRAMNet PMC Reflective Memory NOTE: DMA Performance will be reduced when this card is used in conjuntion with PCI or PCIe Carrier device. (This device will not work with PCIe x4 Carrier cards - Use PCIe x1 Carrier cards only. )Curtis Wright requires purchase of CS-SYS-LIPCPC2S Hardware License for use with this product.
 PMCSystranCS-SYS-DPMCG08M-20 EOL - ORDER BEFORE 7/31/2017 SCRAMNet+ SC150e Network Device 8MB SCRAMNet PMC Reflective Memory NOTE: DMA Performance will be reduced when this card is used in conjuntion with PCI or PCIe Carrier device. (This device will not work with PCIe x4 Carrier cards - Use PCIe x1 Carrier cards only. )Curtis Wright requires purchase of CS-SYS-LIPCPC2S Hardware License for use with this product.
 PMCSystranCS-SYS-GPMC-20SCRAMNet GT200 3.3V PMC 128MB Dual Port Reflective Memory, 210 MB/sec data throughput for large data transfers. NOTE: License is included with purchase of GT200 Hardware. (CW Model H-AS-GPM128SC-20)
 PMCSystranCS-SYS-PH-PMCG02M EOL - ORDER BEFORE 7/31/2017 SCRAMNet+ SC150e Network Device 2MB SCRAMNet PMC Reflective Memory Curtis Wright requires purchase of CS-SYS-LIPCPC2S Hardware License for use with this product.
 PMCSystranCS-SYS-PH-PMCG04M EOL - ORDER BEFORE 7/31/2017 SCRAMNet+ SC150e Network Device 4MB SCRAMNet PMC Reflective Memory Curtis Wright requires purchase of CS-SYS-LIPCPC2S Hardware License for use with this product.
 PMCSystranCS-SYS-PH-PMCG08M EOL - ORDER BEFORE 7/31/2017 SCRAMNet+ SC150e Network Device 8MB SCRAMNet PMC Reflective Memory Curtis Wright requires purchase of CS-SYS-LIPCPC2S Hardware License for use with this product.
 VMESystranCS-SYS-D6VME01M-201MB SCRAMNet+ VME Reflective Memory
 VMESystranCS-SYS-D6VME04M-204MB SCRAMNet+ VME Reflective Memory
 VMESystranCS-SYS-D6VME08M-208MB SCRAMNet+ VME Reflective Memory
 VMESystranCS-SYS-D6VME512-20512KB SCRAMNet+ VME Reflective Memory
 VMESystranCS-SYS-D6VMEH2M-202MB SCRAMNet+ VME Reflective Memory
 CableGECS-GE-CBL-F6-00210 Foot (3.048 m) Multimode Duplex LC Fiber-optic Cable for the CS-GE-PCE-5565-x, CS-GE-PCI-5565-x, CS-GE-PMC-5565-x. (GE-IP p/n CBL-000-F6-002) - This Duplex Cable is Ideal for a 2 Node network. For a 3+ node network, it is best to use simplex cables. (See CS-VMIC-CBL-F5-00X).6 Weeks ARO
 CableGECS-GE-CBL-F6-00316 feet (4.8768 m) Multimode Duplex LC Fiber-optic Cable for the CS-GE-PCE-5565-x, CS-GE-PCI-5565-x, CS-GE-PMC-5565-x. (GE-IP p/n CBL-000-F6-003) - This Duplex Cable is Ideal for a 2 Node network. For a 3+ node network, it is best to use simplex cables. (See CS-VMIC-CBL-F5-00X).6 Weeks ARO
 CableGECS-GE-CBL-F6-00432 feet (9.7536 m) Multimode Duplex LC Fiber-optic Cable for the CS-GE-PCE-5565-x, CS-GE-PCI-5565-x, CS-GE-PMC-5565-x. (GE-IP p/n CBL-000-F6-004) - This Duplex Cable is Ideal for a 2 Node network. For a 3+ node network, it is best to use simplex cables. (See CS-VMIC-CBL-F5-00X).6 Weeks ARO
 CableGECS-GE-CBL-F6-00566 feet (20.1168 m) Multimode Duplex LC Fiber-optic Cable for the CS-GE-PCE-5565-x, CS-GE-PCI-5565-x, CS-GE-PMC-5565-x. (GE-IP p/n CBL-000-F6-006) - This Duplex Cable is Ideal for a 2 Node network. For a 3+ node network, it is best to use simplex cables. (See CS-VMIC-CBL-F5-00X).6 Weeks ARO
 CableGECS-GE-CBL-F6-00698 feet (29.8704 m) Multimode Duplex LC Fiber-optic Cable for the CS-GE-PCE-5565-x, CS-GE-PCI-5565-x, CS-GE-PMC-5565-x. (GE-IP p/n CBL-000-F6-006) - This Duplex Cable is Ideal for a 2 Node network. For a 3+ node network, it is best to use simplex cables. (See CS-VMIC-CBL-F5-00X).6 Weeks ARO
 CableGECS-GE-CBL-F6-007164 feet (49.9872 m) Multimode Duplex LC Fiber-optic Cable for the CS-GE-PCE-5565-x, CS-GE-PCI-5565-x, CS-GE-PMC-5565-x. (GE-IP p/n CBL-000-F6-007) - This Duplex Cable is Ideal for a 2 Node network. For a 3+ node network, it is best to use simplex cables. (See CS-VMIC-CBL-F5-00X).6 Weeks ARO
 CableGECS-GE-CBL-F6-008230 feet (70.104 m) Multimode Duplex LC Fiber-optic Cable for the CS-GE-PCE-5565-x, CS-GE-PCI-5565-x, CS-GE-PMC-5565-x. (GE-IP p/n CBL-000-F6-008) - This Duplex Cable is Ideal for a 2 Node network. For a 3+ node network, it is best to use simplex cables. (See CS-VMIC-CBL-F5-00X).6 Weeks ARO
 CableGECS-GE-CBL-F6-009328 feet (99.9744 m) Multimode Duplex LC Fiber-optic Cable for the CS-GE-PCE-5565-x, CS-GE-PCI-5565-x, CS-GE-PMC-5565-x. (GE-IP p/n CBL-000-F6-009) - This Duplex Cable is Ideal for a 2 Node network. For a 3+ node network, it is best to use simplex cables. (See CS-VMIC-CBL-F5-00X).6 Weeks ARO
 CableGECS-GE-CBL-F6-015721 feet (219.7608 m) Multimode Duplex LC Fiber-optic Cable for the CS-GE-PCE-5565-x, CS-GE-PCI-5565-x, CS-GE-PMC-5565-x. (GE-IP p/n CBL-000-F6-015) - This Duplex Cable is Ideal for a 2 Node network. For a 3+ node network, it is best to use simplex cables. (See CS-VMIC-CBL-F5-00X).6 Weeks ARO
 CableSystranCS-SYS-FHAC-1001Cable for the CS-SYS-GPx SCRAMNet GT200 : 10 meters, Multi-Mode Fiber Optic, Simplex, Size 50/125(um), LC-LC Connectors
 CableSystranCS-SYS-FHAC-2001Cable for the CS-SYS-GPx SCRAMNet GT200: 20 meters, Multi-Mode Fiber Optic, Simplex, Size 50/125(um), LC-LC Connectors
 CableSystranCS-SYS-FHAC-3000Cable for the CS-SYS-GPx SCRAMNet GT200: 3 meters, Multi-Mode Fiber Optic, Simplex, Size 50/125(um), LC-LC Connectors
 CableSystranCS-SYS-FHAC-3001Cable for the CS-SYS-GPx SCRAMNet GT200: 30 meters, Multi-Mode Fiber Optic, Simplex, Size 50/125(um), LC-LC Connectors
 CableSystranCS-SYS-FHAC-5000Cable for the CS-SYS-GPx SCRAMNet GT200: 5 meters, Multi-Mode Fiber Optic, Simplex, Size 50/125(um), LC-LC Connectors
 CableSystranCS-SYS-WST23001-0SCRAMNet Multi-mode Standard Fiber Cable (30 Meters) for the CS-SYS-DPx card.
 CableGECS-VMIC-CBL-F5-0025' Multimode Simplex Fiber-optic Cable - LC/LC connectors. (Two required for the GE / VMIC 5565 family of boards) - (GE p/n CBL-F5-002) - This is a simplex cable, one cable is required for each node in the network. For a two node only network, it is ideal to use a single Duplex cable (See CS-GE-CBL-F6-00x).
 CableGECS-VMIC-CBL-F5-00425' Multimode Simplex Fiber-optic Cable - LC/LC connectors. (Two required for the GE / VMIC 5565 family of boards) - This is a simplex cable, one cable is required for each node in the network. For a two node only network, it is ideal to use a single Duplex cable (See CS-GE-CBL-F6-00x).
 CableGECS-VMIC-CBL-F5-00550' Multimode Simplex Fiber-optic Cable - LC/LC connectors. (Two required for the GE / VMIC 5565 family of boards) - This is a simplex cable, one cable is required for each node in the network. For a two node only network, it is ideal to use a single Duplex cable (See CS-GE-CBL-F6-00x).
 CableGECS-VMIC-CBL-F5-00680' Multimode Simplex Fiber-optic Cable - LC/LC connectors. (Two required for the GE / VMIC 5565 family of boards) - This is a simplex cable, one cable is required for each node in the network. For a two node only network, it is ideal to use a single Duplex cable (See CS-GE-CBL-F6-00x).
 CableGECS-VMIC-CBL-F5-007100' Multimode Simplex Fiber-optic Cable - LC/LC connectors. (Two required for the GE / VMIC 5565 family of boards) - This is a simplex cable, one cable is required for each node in the network. For a two node only network, it is ideal to use a single Duplex cable (See CS-GE-CBL-F6-00x).
RelayPCIPickeringCS-PIC-50-110-021PCI 5V Reed Relay Card - 32 channel SPDT, Ruthenium Relays, Fast Operating 250 usec typical, 150Vdc/100Vac, Max. Power 3W for SPDT, Max Switch Current: 0.25A for SPDT. This item requires connector CS-PIC-40-971-1M or CS-PIC-40-971-2m available through the Custom Catalog.It is strongly suggested that you contact your salesman to ensure that this board will meet your requirements.
 PCIPickeringCS-PIC-50-110-121(Discontinued) PCI 5V Reed Relay Card - 64 channel SPDT, Ruthenium Relays, Fast Operating 250 usec typical, 150Vdc/100Vac, Max. Power 3W for SPDT, Max Switch Current: 0.25A for SPDT. This item requires connector CS-PIC-40-971-1M or CS-PIC-40-971-2m available through the Custom Catalog.It is strongly suggested that you contact your salesman to ensure that this board will meet your requirements.
 PCIPickeringCS-PIC-50-110A-121PCI 5V Reed Relay Card - 64 channel SPDT, Ruthenium Relays, Fast Operating 250 usec typical, 150Vdc/100Vac, Max. Power 3W for SPDT, Max Switch Current: 0.25A for SPDT. This item requires connector CS-PIC-40-971-1M or CS-PIC-40-971-2m available through the Custom Catalog.It is strongly suggested that you contact your salesman to ensure that this board will meet your requirements.
 PCIPickeringCS-PIC-50-115-021PCI 5V Reed Relay Card - 32 channel SPST, Ruthenium Relays, Fast Operating 250 usec typical, 150Vdc/100Vac, Max. Power 3W for SPDT, Max Switch Current: 0.25A for SPDT. This item requires connector CS-PIC-40-970-1M or CS-PIC-40-970-2m available through the Custom Catalog.It is strongly suggested that you contact your salesman to ensure that this board will meet your requirements.
 VMEGECS-VMIC-2210-10064-Channel Latching/Momentary Relay VME Board (Minimum Order Quantity 10 Required)14 Weeks ARO
 CablePickeringCS-PIC-40-970-1M1 Meter Cable for the CS-PIC-50-115-x relay cards. 200 Pin Connector to Connector Assembly - LFH Male to MALE - 4 Wire Bundles, Braided Sleeve Over Outer Layers - Metal Screwlocks 4-40 UNC - Uses 1A Rated Ribbon Cable. (Pickering p/n: 40-970A-200-1m-MM)It is strongly suggested that you contact your salesman to ensure that this board will meet your requirements.
 CablePickeringCS-PIC-40-970-2M2 Meter Cable for the CS-PIC-50-115-x relay cards. 200 Pin Connector to Connector Assembly - LFH Male to MALE - 4 Wire Bundles, Braided Sleeve Over Outer Layers - Metal Screwlocks 4-40 UNC - Uses 1A Rated Ribbon Cable. (Pickering p/n: 40-970A-200-2m-MM)It is strongly suggested that you contact your salesman to ensure that this board will meet your requirements.
 CablePickeringCS-PIC-40-971-1M1 Meter Cable for the CS-PIC-50-110-x relay cards. 200 Pin Connector to Connector Assembly - LFH Male to 50-Way D-type - Braided Sleeve Over Outer Layers - Metal Screwlocks 4-40 UNC - Uses 1A Rated Twisted Pair. O/D 10mm. (Pickering p/n: 40-971A-200D-1M)It is strongly suggested that you contact your salesman to ensure that this board will meet your requirements.
 CablePickeringCS-PIC-40-971-2M2 Meter Cable for the CS-PIC-50-110-x relay cards. 200 Pin Connector LFH to Unterminated - Braided Sleeve Over Outer Layers - Metal Screwlocks 4-40 UNC - Uses 1A Rated Twisted Pair. O/D 10mm. (Pickering p/n: 40-971A-200D-2M)It is strongly suggested that you contact your salesman to ensure that this board will meet your requirements.
 CablePickeringCS-PIC-40-972-1M1 Meter Cable for the CS-PIC-50-110/115-x relay cards. able Assy 200-Way LFH Male to 4x50-Way Unterminated, Tinned Ends, 1m Long. (Pickering p/n: 40-972-200-1M-MU)It is strongly suggested that you contact your salesman to ensure that this board will meet your requirements.
 CablePickeringCS-PIC-40-972-2M2 Meter Cable for the CS-PIC-50-110/115-x relay cards. able Assy 200-Way LFH Male to 4x50-Way Unterminated, Tinned Ends, 1m Long (Pickering p/n: 40-972-200-2M-MU)It is strongly suggested that you contact your salesman to ensure that this board will meet your requirements.
Relay/DIPCIADLINKCS-AL-P725616-CH Latching SPDT Relay Outputs & 16-CH Isolated DI Card, COS Interrupt. Supports a 32-bit 3.3 V or 5 V PCI bus ( Adlink p/n PCI-7256)
 PCIADLINKCS-AL-P7256E16-CH Latching SPDT Relay Outputs & 16-CH Isolated DI Card, COS Interrupt. Supports a 32-bit PCIe bus ( Adlink p/n PCIe-7256)
 CableADLINKCS-AL-ACL-10569-2(Adlink ACL-10569-2) -2M SCSI 68 to 68 Cable for the CS-AL-P7256
 AccessoryADLINKCS-AL-CB-50-50-5Cable - 58.5 inch - Flat cable. 50 Pin Female IDC connector to 50 Pin Female IDC & 50 Pin Male IDC connectors for the CS-AL-P7256 DIO device. p/n (720-1880017-910)
 AccessoryADLINKCS-AL-CB-50-50-8Cable - 97.5 inch - Flat cable. 50 Pin Female IDC connector to 50 Pin Female IDC & 50 Pin Male IDC connectors for the CS-AL-P7256 DIO device. p/n (720-1880017-909)
 AccessoryADLINKCS-AL-DIN-68S-1(Adlink DIN-68S-1) - General purpose termination board for 68-pin SCSI -II Cable for the CS-AL-P7256. Dimensions: 103 mm x 83 mm x 43 mm (W x L x H).
ResistorPCIeConcurrentCP-RESSIM-16Concurrent's Resistor Simulator PCIe card provides 16 individual resistors programmable from 45 ohms to 1 megaohms in 5 ohm steps. Voltage ranges are +/-14V with a maximum current of +/-10mA. Includes OPEN, +VOLTAGE and GROUND fault insertion on all resistor lines. Features and characteristics of the card are as follows::

  • 16-channel Digital Programmable Resistance
  • 45 to 1M Ohm Range in 5 Ohm increments)
  • 10 Ohm Low Scale Selection
  • +/-14V @ 10 Milliamp
  • Open, Ground and V+ Fault Insertion
  • Galvanic Isolation
  • Overvoltage Protection
  • Overcurrent Protection
  • Analog Devices AD5293 Digital Potentiometers
  • Industry Standard SCSI 68-pin Connector for I/O
  • PCI Express x1 Revision 1.0a
  • NIST Traceable Calibration Standard (Optional)
  • Accuracy:
  • 10 ohms: +/-4 ohms
  • 45 ohms to 1K ohms: +/-10%
  • Greater than 1K ohms: +/-5%
  • Cables: CX-CBL-HSI-68-xx; Breakout module CX-CBL-AIO-BRKF
  • Supported by RedHawk and SimWB
     PCIPickeringCS-PIC-50-295-1012PCI 5V Programmable Resistor Card - Configurable Resolutions, Fully Isolated Variable Resistors (0? to 4k?) 12-bit, High Reliability Pickering Reed Relays. (Vendor P/N 50-295-121-10-12)It is strongly suggested that you contact your salesman to ensure that this board will meet your requirements.
     PCIPickeringCS-PIC-50-295-1016PCI 5V Programmable Resistor Card 10 Channel, 16 bit resolution. Fully Isolated Variable Resistors, 10 x 16-Bit (0? to 65k?), High Reliability Pickering Reed Relays. (Vendor P/N 50-295-121-10-16)It is strongly suggested that you contact your salesman to ensure that this board will meet your requirements.
    SENTPCIeConcurrentCP-SENT-12Concurrent's SENT I/O PCIe card supports the Single Edge Nibble Transmission (SENT) protocol as specified by SAE J2716. The card provides 12 SENT input and output channels with a tick length resolution of 15 Ns The number of data nibbles per message can be configured between 1 and 6. The basic SENT protocol tick length, which defaults to 3 microseconds, can be varied on the fly. The card supports both legacy and current CRC-4 calculations as well as the optional pause pulse. In addition, the implementation supports both short and enhanced-format messages with 4-bit and 8-bit IDs. (Cable: CX-LFH60 / CX-LFH60-DIN) Supported by SimWB
    SerialPCIeComtrolCS-CT-30126-4RocketPort EXPRESS Quadcable DB9M is a four port serial adapter PCIe 4-Port serial card with DB9M fanout cable, communication speeds up to 921 Kbps, PCI Express serial x1, x2, x4, x8, x12 and x16 lane connectivity, RS-232, RS-422, RS-485 software-selectable serial ports (Vendor p/n 30126-4 )NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.
     PCIeComtrolCS-CT-30127-1RocketPort EXPRESS Quadcable DB25M is a four port serial adapter PCIe 4-Port serial card with DB25M fanout cable , communication speeds up to 921 Kbps, PCI Express serial x1, x2, x4, x8, x12 and x16 lane connectivity, RS-232, RS-422, RS-485 software-selectable serial ports (Vendor p/n 30127-1) NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.
     PCIeComtrolCS-CT-30138-1RocketPort EXPRESS Quadcable DB25M is a 32 port serial adapter PCIe 32-Port serial card with Two (2) 16-Port DB9M Interface Panels , communication speeds up to 460 Kbps, PCI Express serial x1, x2, x4, x8, x12 and x16 lane connectivity, RS-232, RS-422, RS-485 software-selectable serial ports (Vendor p/n 30138-7, 2x 30030-4) NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.
     PCIeGeneral StdsCS-GS-S4BXR-S-256EPCIe-SIO4BXR-SYNC-256K -Four Independent Multi-Protocol Serial Channels, Independent Transmit and Receive FIFOs for each Serial Channel – 32K byte each, Multi-protocol Transceivers support RS422/RS485, RS232, RS423, Fast RS422/RS485 Differential cable transceivers provide Data Rates up to 10Mbps, RS423 and RS232 cable transceivers provide Data Rates up to 230kbps, Two Signal (Clock/Data) or Three Signal modes (Clock/Data/Data Valid), Programmable Oscillators provide increased flexibility for Baud Rate Clock generation, Fully Programmable Polarity on all signals, Eight signals per channel, configurable as either DTE or DCE: 3 Serial Clocks (TxC,RxC,AuxC), 2 Serial Data (TxD,RxD), 2 Data Valid (TxE,RxE), plus Spare, SCSI type 68 pin front edge I/O Connector. **This device does not support the high level protocols like the SIO4BX/Zilog chips and does not add/strip any information to/from the data stream. (GS p/n PCIe-SIO4BXR-SYNC-256K)SDLC/HDLC is not supported by General Standards Software provided with this device. Alternate hardware/software should be purchased for SDLC/HDLC support.
     PCIeGeneral StdsCS-GS-S4BXR-S-48EPCIe-SIO4BXR-SYNC-48KLC -Four Independent Multi-Protocol Serial Channels, Independent Transmit and Receive FIFOs for each Serial Channel – 4K byte TX / 8K byte RX or 8K byte TX / 4K Byte RX (programable), Multi-protocol Transceivers support RS422/RS485, RS232, RS423, Fast RS422/RS485 Differential cable transceivers provide Data Rates up to 10Mbps, RS423 and RS232 cable Transceivers Provide Data Rates up to 230kbps, Two Signal (Clock/Data) or Three Signal modes (Clock/Data/Data Valid), Programmable Oscillators provide increased flexibility for Baud Rate Clock generation, Fully Programmable Polarity on all signals, Eight signals per channel, configurable as either DTE or DCE: 3 Serial Clocks (TxC,RxC,AuxC), 2 Serial Data (TxD,RxD), 2 Data Valid (TxE,RxE), plus Spare, SCSI type 68 pin front edge I/O Connector. **This device does not support the high level protocols like the SIO4BX/Zilog chips and does not add/strip any information to/from the data stream. ((GS p/n PCIe-SIO4BXR-SYNC-48KLC)SDLC/HDLC is not supported by General Standards Software provided with this device. Alternate hardware/software should be purchased for SDLC/HDLC support.
     PCIeGeneral StdsCS-GS-S4BXR-S-64EPCIe-SIO4BXR-SYNC-64K -Four Independent Multi-Protocol Serial Channels, Independent Transmit and Receive FIFOs for each Serial Channel – 8K byte TX / 16K byte RX or 16K byte TX / 8K Byte RX (programable), Multi-protocol Transceivers support RS422/RS485, RS232, RS423, Fast RS422/RS485 Differential cable Transceivers Provide Data Rates up to 10Mbps, RS423 and RS232 cable transceivers provide data rates up to 230kbps, Two Signal (Clock/Data) or Three Signal modes (Clock/Data/Data Valid), Programmable Oscillators provide increased flexibility for Baud Rate Clock generation, Fully Programmable Polarity on all signals, Eight signals per channel, configurable as either DTE or DCE: 3 Serial Clocks (TxC,RxC,AuxC), 2 Serial Data (TxD,RxD), 2 Data Valid (TxE,RxE), plus Spare, SCSI type 68 pin front edge I/O Connector. **This device does not support the high level protocols like the SIO4BX/Zilog chips and does not add/strip any information to/from the data stream. ((GS p/n PCIe-SIO4BXR-SYNC-64K)SDLC/HDLC is not supported by General Standards Software provided with this device. Alternate hardware/software should be purchased for SDLC/HDLC support.
     PCIeGeneral StdsCS-GS-SIO4BX2PCIe-SIO4BX2 -High-performance Multi-Protocol Serial I/O with software configurable cable transceivers (RS422, RS232 and others). 32K byte FIFOs on each chan (both Tx & Rx, 8 total) (GS p/n PCIe-SIO4BX2)SDLC/HDLC is not supported by General Standards Software provided with this device. Alternate hardware/software should be purchased for SDLC/HDLC support.
     PCIeGeneral StdsCS-GS-SIO4BX2-IPCIe-SIO4BX2-I -High-performance Multi-Protocol Serial I/O with software configurable cable transceivers (RS422, RS232 and others). 32K byte FIFOs on each chan (both Tx & Rx, 8 total) Industrial Temperature Range (GS p/n PCIe-SIO4BX2-I)(GS p/n PCIe-SIO4BX2)SDLC/HDLC is not supported by General Standards Software provided with this device. Alternate hardware/software should be purchased for SDLC/HDLC support.
     PCIeGeneral StdsCS-GS-SIO4BX2-SPCIe-SIO4BX2-Sync -Quad Channel Synchronous Serial To Parallel Controller with software configurable cable transceivers (RS422, RS232 and others). 32K byte FIFOs on each chan (both Tx & Rx, 8 total) (GS p/n PCIe-SIO4BX2-SYNC)SDLC/HDLC is not supported by General Standards Software provided with this device. Alternate hardware/software should be purchased for SDLC/HDLC support.
     PCIeGeneral StdsCS-GS-SIO4BXR-256EPCIe-SIO4BXR-256K - Front or Rear I/O - Four channel serial interface card which provides high speed, full-duplex, Multi-Protocol Serial I/O with software configurable cable transceivers (RS422, RS232 and others) with Rear I/O. 32K byte FIFOs on each chan (both Tx & Rx, 8 total) . The SIO4BXR combines two multi-protocol Dual Universal Serial Controllers (USC®), 8 external FIFOs, and multi-protocol transceivers to provide four fully independent asynchronous or synchronous serial channels. Multiprotocol Transceivers support RS422 (V.11)/RS485, RS423 (V.10), RS232 (V.28), V.35, RS530, as well as other Mixed Protocol modes. SDLC/HDLC is not supported by General Standards Software provided with this device. Alternate hardware/software should be purchased for SDLC/HDLC support.
     PCIeGeneral StdsCS-GS-SIO4BXR-64EPCIe-SIO4BXR-64K - Front or Rear I/O - Four channel serial interface card which provides high speed, full-duplex, Multi-Protocol Serial I/O with software configurable cable transceivers (RS422, RS232 and others) with Rear I/O. 8K byte FIFOs on each chan (both Tx & Rx, 8 total). The SIO4BXR combines two multi-protocol Dual Universal Serial Controllers (USC®), 8 external FIFOs, and multi-protocol transceivers to provide four fully independent asynchronous or synchronous serial channels. Multiprotocol Transceivers support RS422 (V.11)/RS485, RS423 (V.10), RS232 (V.28), V.35, RS530, as well as other Mixed Protocol modes. SDLC/HDLC is not supported by General Standards Software provided with this device. Alternate hardware/software should be purchased for SDLC/HDLC support.
     PCIeMicrogateCS-MG-GT4EMicroGate SyncLink GT4e PCIe Adapter, 4-port 10Mbps synchronous, 8Mbps asynchronous, SDLC, HDLC, BISYNC, MONOSYNC, ASYNC, raw bit-synchronous protocols, Clock Generation, Encoding: NRZ,NRZB,NRZ-L,NRZI,NRZ-M,NRZ-S,FM\Optional termination for differential inputs, Full set of control and status signals (DTR,DSR,RTS,CTS,DCD,RI,LL,RL) Y (Vendor p/n 403190)
     PCIeMicrogateCS-MG-GT4EX( Minimum Order Quantity Fifty (50) )MicroGate SyncLink GT4eX PCIe Adapter, EXTENDED TEMPERATURE, 4-port 10Mbps synchronous, 8Mbps asynchronous, SDLC, HDLC, BISYNC, MONOSYNC, ASYNC, raw bit-synchronous protocols, Clock Generation, Encoding: NRZ,NRZB,NRZ-L,NRZI,NRZ-M,NRZ-S,FM\Optional termination for differential inputs, Full set of control and status signals (DTR,DSR,RTS,CTS,DCD,RI,LL,RL) Environmental: Temperature -40C to +85C; humidity 0 to 95% non-condensing; alt. - 200 to +10,000 ft, (Vendor p/n 403X83)"Build to Order" - Minimum quanty purchase fifty (50) Units.
     PCIeMOXACS-MX-CP114EL-25MOXA CP-114EL-DB25: PCIe x1 - 4 RS232/RS422/RS485 ports, data rates up to 921.6Kbps, modem control signals, Asynchronous Serial support. Interrupt driven I/O for real time performance. (Moxa includes the DB25 male cable)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIeMOXACS-MX-CP114EL-9MOXA CP-114EL-DB9M: PCIe x1 - 4 RS232/RS422/RS485 ports, data rates up to 921.6Kbps, modem control signals, Asynchronous Serial support. Interrupt driven I/O for real time performance. (Moxa includes the DB9 male cable)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIeMOXACS-MX-CP114EL-I-25MOXA CP-114EL-I-DB25: (Isolated) PCIe x1 - 4 RS232/RS422/RS485 ports, data rates up to 921.6Kbps, modem control signals, Asynchronous Serial support. Interrupt driven I/O for real time performance. (Moxa includes the DB25 male cable)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIeMOXACS-MX-CP114EL-I-9MOXA CP-114EL-I-DB9M: (Isolated) PCIe x1 - 4 RS232/RS422/RS485 ports, data rates up to 921.6Kbps, modem control signals, Asynchronous Serial support. Interrupt driven I/O for real time performance. (Moxa includes the DB9 male cable)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIeMOXACS-MX-CP116A-25MMOXA CP-116E-A PCIe & Add-on Dual DB25 cables (Male Connectors): 16-Port RS232/RS422/RS485, Serial communication speed up to 921.6 kbps, modem control signals, 128-byte FIFO and on-chip H/W, S/W flow control, 15 kV ESD, 4 kV surge. (Includes Two (2) DB25 cables CS-MX-CBL-M68x8) - Requires Driver NRE and RIQ for SWB Support.Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIeMOXACS-MX-CP116A-9MMOXA CP-116E-A PCIe & Add-on Dual DB9 cables (Male Connectors): 16-Port RS232/RS422/RS485, Serial communication speed up to 921.6 kbps, modem control signals, 128-byte FIFO and on-chip H/W, S/W flow control, 15 kV ESD, 4 kV surge. (Includes Two (2) DB9 cables CS-MX-CBL-M68M9x8) - Requires Driver NRE and RIQ for SWB Support.Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIeMOXACS-MX-CP118E-AI-25MOXA CP-118E-A-I PCIe & Add-on DB25 cable: 8 RS232/RS422/RS485 ports, data rates up to 921.6Kbps, modem control signals, 128-byte FIFO and on-chip H/W, S/W flow control, 15 kV ESD, 4 kV surge, and 2 kV electrical isolation onboard. (Includes DB25 cable CS-MX-CBL-M7825x8)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIeMOXACS-MX-CP118E-AI-9MOXA CP-118E-A-I PCIe & Add-on DB9 cable: 8 RS232/RS422/RS485 ports, data rates up to 921.6Kbps, modem control signals, 128-byte FIFO and on-chip H/W, S/W flow control, 15 kV ESD, 4 kV surge, and 2 kV electrical isolation onboard. PCIe x1 compatible slot required. (Includes DB9 cable CS-MX-CBL-M78x8)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIeMOXACS-MX-CP118EL-AMOXA CP-118EL-A: PCIe - 8 RS232/RS422/RS485 ports, data rates up to 921.6Kbps, modem control signals, 128-byte FIFO and on-chip H/W, S/W flow control. Low Profile form factor. PCIe x1 compatible slot required. (Requires purchase of additional cable.)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIeMOXACS-MX-CP118EL-A-25MOXA CP-118EL-A: PCIe & Add-on DB25 cable - 8 RS232/RS422/RS485 ports, data rates up to 921.6Kbps, modem control signals, 128-byte FIFO and on-chip H/W, S/W flow control. Low Profile form factor. PCIe x1 compatible slot required. (Includes DB25 cable CS-MX-CBL-M68x8)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIeMOXACS-MX-CP118EL-A-9MOXA CP-118EL-A & Add-on DB9 cable: PCIe - 8 RS232/RS422/RS485 ports, data rates up to 921.6Kbps, modem control signals, 128-byte FIFO and on-chip H/W, S/W flow control. Low Profile form factor. PCIe x1 compatible slot required. (Includes DB9 cable CS-MX-CBL-M68M9x8)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCICommtechCS-CM-F422-4-335Commtech Fastcom: 422/4-PCI-335 - Universal PCI 4-ports, RS422 & RS485 Async Only. Vendor Listed Specifications: Maximum serial data rate of 6.25 Mbps, 17D154 UART, Universal PCI (3.3V & 5V). Unless non-standard baud rates are required, Concurrent recommends purchase of the MOXA CS-MX-CPXXX serial products. Note: This device does not support Synchronous communications - This is an Async only device. Includes DB37 plug to four DB9 Female receptacles. (**TECHNICAL CONDITIONS**) Requires RedHawk Linux Release 5.4 or higher, a custom kernel is required to support this device and it will not function in an external PCI expansion chassis. (MFG p/n 422/4-PCI-335)
     PCICommtechCS-CM-F422-4-ECommtech Fastcom: 422/4-PCIe - 4-ports, RS422 & RS485 Async Only. Vendor Listed Specifications: UART: EXAR 17V358(Data Sheet) INTERFACE: RS422 / RS485 SIGNALS: TX+, TX–, RS+, RX–, RTS+, RTS–, CTS+, CTS–; BUS INTERFACE: PCIe 2.0 Gen 1 (x1); BAUD RANGE: All standard PC baud rates; easily select any non-standard baud rates from 1 bps to 25 Mbps Maximum data rates are estimates. They are greatly affected by a number of different factors. This is possible as long as the operating parameters are within reason. If you have any question about whether the card can meet your needs, please contact your CCRT Salesman. Includes VHDCI 68 plug to four DB9 receptacles cable. ENVIRONMENT: Storage Temperature Range: -20 to +70 C Operating Temperature Range: 0 to 70 C Humidity: 0 to 90% (non-condensing) **TECHNICAL CONDITIONS** Requires RedHawk Linux Release 5.4 or higher, a custom kernel is required to support this device and it may not function in an external PCIe expansion chassis. (MFG p/n 422/4-PCIe)
     PCICommtechCS-CM-F422-8-ECommtech Fastcom: 422/8-PCIe - 8-ports, RS422 & RS485 Async Only. Vendor Listed Specifications: UART: EXAR 17V358(Data Sheet) INTERFACE: RS422 / RS485 SIGNALS: TX+, TX–, RS+, RX–, RTS+, RTS–, CTS+, CTS–; BUS INTERFACE: PCIe 2.0 Gen 1 (x1); BAUD RANGE: All standard PC baud rates; easily select any non-standard baud rates from 1 bps to 25 Mbps Maximum data rates are estimates. They are greatly affected by a number of different factors. This is possible as long as the operating parameters are within reason. If you have any question about whether the card can meet your needs, please contact your CCRT Salesman. Includes VHDCI 68 plug to eight DB9 receptacles cable. ENVIRONMENT: Storage Temperature Range: -20 to +70 C Operating Temperature Range: 0 to 70 C Humidity: 0 to 90% (non-condensing) **TECHNICAL CONDITIONS** Requires RedHawk Linux Release 5.4 or higher, a custom kernel is required to support this device and it may not function in an external PCIe expansion chassis. (MFG p/n 422/8-PCIe)
     PCICommtechCS-CM-SuperFSCC-4Commtech SuperFSCC/4 - Universal PCI 4-ports, RS422 & RS485 Synchronous support only. Vendor listed specifications: Maximum serial data rates 12.5 Mbits/s DPLL, 30 Mbits/s external, 50 Mbits/s internal clock, CP711A UART, Universal PCI (3.3V & 5V). Includes Two 0.8mm Champ connectors to four DB25 plugs. (**NOTE**) It has been found that this device's Asynchronous support is non-functional and therefore Concurrent cannot support asynchronous communications with this device (please see the General Standards CS-GS-SIO4B family or MOXA CS-MX-CPXXX family of serial I/O devices for asynchronous support). (MFG p/n SuperFSCC/4)
     PCICommtechCS-CM-SuperFSCC-4ECommtech SuperFSCC/4-PCIe - PCIe x1 4-ports, RS422 & RS485 Synchronous support only. Vendor listed specifications: Maximum serial data rates 12.5 Mbits/s DPLL, 30 Mbits/s external, 50 Mbits/s internal clock, CP711A UART, PCIe 2.0 Gen 1 x1 adapter. Includes Two 0.8mm Champ connectors to four DB25 plugs. (**NOTE**) It has been found that this device's Asynchronous support is non-functional and therefore Concurrent cannot support asynchronous communications with this device (please see the General Standards CS-GS-SIO4B family or MOXA CS-MX-CPXXX family of serial I/O devices for asynchronous support). (MFG p/n SuperFSCC/4-PCIe)
     PCICommtechCS-CM-SuperFSCC-4LCommtech SuperFSCC/4-PCIe-LVDS - PCIe x1 4-ports, LVDS / RS644 Synchronous support only. Vendor listed specifications: Maximum serial data rates 12.5 Mbits/s DPLL, 30 Mbits/s external, 50 Mbits/s internal clock, CP711A UART, PCIe 2.0 Gen 1 x1 adapter. Includes cable assembly (2 ft.) — Two CHAMP 50 VHDCI connectors to four DB25 plugs (**NOTE**) It has been found that this device's Asynchronous support is non-functional and therefore Concurrent cannot support asynchronous communications with this device (please see the General Standards CS-GS-SIO4B family or MOXA CS-MX-CPXXX family of serial I/O devices for asynchronous support). (MFG p/n SuperFSCC/4-PCIe-LVDS)
     PCIComtrolCS-CT-30002-18-Port RocketPort INFINITY Octacable RJ45 - Serial adapter - PCI-X - RS-232, RS-422, RS-485 - Includes 8-port RJ45 cable assembly. NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.
     PCIComtrolCS-CT-30010-632 Port RocketPort Infinity RS232/422/485 PCI-X device (5V/3.3V PCI Slot Compatible) (RoHS) (Requires Two CS-CT-3c0030-4 16-Port Interface Panel) NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.
     PCIComtrolCS-CT-30015-116 Port RocketPort Infinity RS232/422/485 PCI-X device (5V/3.3V PCI Slot Compatible) (RoHS) (Requires One CS-CT-3c0030-4 16-Port Interface Panel ) NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.
     PCIComtrolCS-CT-30020-58 Port RocketPort Infinity RS232/422/485 PCI-X device (5V/3.3V PCI Slot Compatible) (RoHS) (Requires One CS-CT-3c0040-3 8-Port Interface Panel) NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.
     PCIComtrolCS-CT-99341-4**DISCONTINUED PRODUCT** - Last Order Date 6/30/2017- Suggested Replacement: CS-CT-30020-5 - RocketPort Universal PCI-Quad 4-Channel RS232 DB9M PCI Adapter (5V/3.3V PCI Slot Compatible) (RoHS) (Replaces CS-CT-99095-6) NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.
     PCIComtrolCS-CT-99342-1**DISCONTINUED PRODUCT** - Last Order Date 6/30/2017 - Suggested Replacement: CS-CT-30020-5 - RocketPort Universal PCI-Octa 8-port RS232 DB9M (5V/3.3V PCI Slot Compatible) (RoHS) (Replaces CS-CT-99096-3) NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.
     PCIComtrolCS-CT-99343-8**DISCONTINUED PRODUCT** - Last Order Date 6/30/2017 - Suggested Replacement: CS-CT-30020-5 - RocketPort Universal PCI-Quad 4-Channel RS232 DB25M PCI Adapter (5V/3.3V PCI Slot Compatible) (RoHS) (Replaces CS-CT-99097-0) NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.
     PCIComtrolCS-CT-99344-5**DISCONTINUED PRODUCT** - Last Order Date 6/30/2017 - Suggested Replacement: CS-CT-30020-5 - RocketPort Universal PCI-Octa 8-port RS232 DB25M (5V/3.3V PCI Slot Compatible) (RoHS) (Replaces CS-CT-99098-7) NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.
     PCIComtrolCS-CT-99345-2RocketPort Universal PCI-Octa 8-port RS232 RJ45 (5V/3.3V PCI Slot Compatible) (RoHS) (Replaces CS-CT-99099-4) NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.
     PCIComtrolCS-CT-99355-1RocketPort Universal PCI-16 Port RS232/422 on each port (5V/3.3V PCI Slot Compatible). Requires a 16-port External Universal Interface (CS-CT-P-99360-5) (RoHS) (Replaces CS-CT-99125-0) NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.
     PCIComtrolCS-CT-99365-0RocketPort Universal PCI-8 Port Low Profile (5V/3.3V PCI Slot Compatible). Requires an 8-port External Universal Interface (CS-CT-99370-4) (RoHS) (Replaces CS-CT-99110-6) NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.
     PCIGeneral StdsCS-GS-SIO4BXR-256PCI66-SIO4BXR-256K - Front or Rear I/O - Four channel serial interface card which provides high speed, full-duplex, Multi-Protocol Serial I/O with software configurable cable transceivers (RS422, RS232 and others) with Rear I/O. 32K byte FIFOs on each chan (both Tx & Rx, 8 total) . The SIO4BXR combines two multi-protocol Dual Universal Serial Controllers (USC®), 8 external FIFOs, and multi-protocol transceivers to provide four fully independent asynchronous or synchronous serial channels. Multiprotocol Transceivers support RS422 (V.11)/RS485, RS423 (V.10), RS232 (V.28), V.35, RS530, as well as other Mixed Protocol modes. SDLC/HDLC is not supported by General Standards Software provided with this device. Alternate hardware/software should be purchased for SDLC/HDLC support.
     PCIGeneral StdsCS-GS-SIO4BXR-64PCI66-SIO4BXR-64K - Front or Rear I/O - Four channel serial interface card which provides high speed, full-duplex, Multi-Protocol Serial I/O with software configurable cable transceivers (RS422, RS232 and others) with Rear I/O. 8K byte FIFOs on each chan (both Tx & Rx, 8 total). The SIO4BXR combines two multi-protocol Dual Universal Serial Controllers (USC®), 8 external FIFOs, and multi-protocol transceivers to provide four fully independent asynchronous or synchronous serial channels. Multiprotocol Transceivers support RS422 (V.11)/RS485, RS423 (V.10), RS232 (V.28), V.35, RS530, as well as other Mixed Protocol modes. SDLC/HDLC is not supported by General Standards Software provided with this device. Alternate hardware/software should be purchased for SDLC/HDLC support.
     PCIGeneral StdsCS-GS-SIO8BX-A128KPCI-SIO8BXS-128K - eight channel serial interface card which provides high speed, full-duplex, multi-protocol serial capability. The SIO8BX combines four multi-protocol Dual Universal Serial Controllers (USC®), 16 external FIFOs, and multi-protocol transceivers to provide eight fully independent asynchronous or synchronous serial channels. Multiprotocol Transceivers support RS422 (V.11)/RS485, RS423 (V.10), RS232 (V.28), V.35, RS530, as well as other Mixed Protocol modes. The Zilog chips will handle the protocol specific overhead and add/strip extra information from the serial data stream to make it match the requested protocol. SDLC/HDLC is not supported by General Standards Software provided with this device. Alternate hardware/software should be purchased for SDLC/HDLC support.
     PCIGeneral StdsCS-GS-SIO8BX-A512KPCI-SIO8BXS-512K - eight channel serial interface card which provides high speed, full-duplex, multi-protocol serial capability. The SIO8BX combines four multi-protocol Dual Universal Serial Controllers (USC®), 16 external FIFOs, and multi-protocol transceivers to provide eight fully independent asynchronous or synchronous serial channels. Multiprotocol Transceivers support RS422 (V.11)/RS485, RS423 (V.10), RS232 (V.28), V.35, RS530, as well as other Mixed Protocol modes. The Zilog chips will handle the protocol specific overhead and add/strip extra information from the serial data stream to make it match the requested protocol. SDLC/HDLC is not supported by General Standards Software provided with this device. Alternate hardware/software should be purchased for SDLC/HDLC support.
     PCIGeneral StdsCS-GS-SIO8BX-A8KPCI-SIO8BXS-8KLC - eight channel serial interface card which provides high speed, full-duplex, multi-protocol serial capability. The SIO8BX combines four multi-protocol Dual Universal Serial Controllers (USC®), 16 external FIFOs, and multi-protocol transceivers to provide eight fully independent asynchronous or synchronous serial channels. Multiprotocol Transceivers support RS422 (V.11)/RS485, RS423 (V.10), RS232 (V.28), V.35, RS530, as well as other Mixed Protocol modes. The Zilog chips will handle the protocol specific overhead and add/strip extra information from the serial data stream to make it match the requested protocol. SDLC/HDLC is not supported by General Standards Software provided with this device. Alternate hardware/software should be purchased for SDLC/HDLC support.
     PCIGeneral StdsCS-GS-SIO8BX2EPCIe4-SIO8BX2-0 - Eight Channel High Performance Serial I/O PCIe x4 device (Native form factor PCIe 4 lanes, Standard Temperatures). Featuring Multi-Protocol Serial I/O with software configurable cable transceivers and 32k byte FIFO Buffers (512k byte total). The SIO8BX2 is a combines four multi-protocol Dual Universal Serial Controllers (USC®), 16 external FIFOs, and multi-protocol transceivers to provide eight fully independent asynchronous or synchronous serial channels. Multiprotocol Transceivers support RS422 (V.11)/RS485, RS423 (V.10), RS232 (V.28), V.35, RS530, as well as other Mixed Protocol modes. The Zilog chips will handle the protocol specific overhead and add/strip extra information from the serial data stream to make it match the requested protocol. Requires an available PCIe x4 Slot.SDLC/HDLC is not supported by General Standards Software provided with this device. Alternate hardware/software should be purchased for SDLC/HDLC support.
     PCIGeneral StdsCS-GS-SIO8BX2E-IPCIe4-SIO8BX2-I - Industrial Temperatures Eight Channel High Performance Serial I/O PCIe x4 device (Native form factor PCIe 4 lanes, Standard Temperatures). Featuring Multi-Protocol Serial I/O with software configurable cable transceivers and 32k byte FIFO Buffers (512k byte total). The SIO8BX2 is a combines four multi-protocol Dual Universal Serial Controllers (USC®), 16 external FIFOs, and multi-protocol transceivers to provide eight fully independent asynchronous or synchronous serial channels. Multiprotocol Transceivers support RS422 (V.11)/RS485, RS423 (V.10), RS232 (V.28), V.35, RS530, as well as other Mixed Protocol modes. The Zilog chips will handle the protocol specific overhead and add/strip extra information from the serial data stream to make it match the requested protocol. Requires an available PCIe x4 Slot.SDLC/HDLC is not supported by General Standards Software provided with this device. Alternate hardware/software should be purchased for SDLC/HDLC support.
     PCIGeneral StdsCS-GS-SIO8BX2E-SPCIe4-SIO8BX2-SYNC-0 - Eight Independent Multi-Protocol Synchronous Serial Channels, Independent Transmit and Receive FIFOs for each Serial Channel – 32K byte each, Fast RS422/RS485 Differential cable Transceivers Provide Data Rates up to 10Mbps, RS232 cable Transceivers Provide Data Rates up to 250kbps, Two Signal (Clock/Data) or Three Signal modes (Clock/Data/Data Valid), Programmable Oscillators provide increased flexibility for Baud Rate Clock generation, Programmable Transmit Bit Counts allow for various transmit word lengths, Programmable Transmit Gap Bit Counts allow for variable gap between words, Fully Programmable Polarity on all signals, Eight signals per channel, configurable as either DTE or DCE, 3 Serial Clocks (TxC,RxC,AuxC), 2 Serial Data (TxD,RxD), 2 Data Valid (TxE,RxE), plus Spare, Four Lane PCI Express (PCIe4) Interface. (GS P/N - PCIe4-SIO8BX2-SYNC-0)SDLC/HDLC is not supported by General Standards Software provided with this device. Alternate hardware/software should be purchased for SDLC/HDLC support.
     PCIMOXACS-MX-CP114UL-25MOXA CP-114UL-DB25M: PCI - 4 RS232/RS422/RS485 ports, data rates up to 921.6Kbps, modem control signals, 3.3V & 5V PCI buses, Asynchronous Serial support. Interrupt driven I/O for real time performance. (Moxa includes the DB25 male cable)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIMOXACS-MX-CP114UL-9MOXA CP-114UL-DB9M: PCI - 4 RS232/RS422/RS485 ports, data rates up to 921.6Kbps, modem control signals, 3.3V & 5V PCI buses, Asynchronous Serial support. Interrupt driven I/O for real time performance. (Moxa includes the DB9 male cable)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIMOXACS-MX-CP114UL-I-25MOXA CP-114UL-I-DB25: (Isolated) PCI - 4 RS232/RS422/RS485 ports with 2KV Optical Isolation, data rates up to 921.6Kbps, modem control signals, 3.3V & 5V PCI buses, Asynchronous Serial support. Interrupt driven I/O for real time performance. (Moxa includes the DB25 male cable)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIMOXACS-MX-CP114UL-I-9MOXA CP-114UL-I-DB9: (Isolated) PCI - 4 RS232/RS422/RS485 ports with 2KV Optical Isolation, data rates up to 921.6Kbps, modem control signals, 3.3V & 5V PCI buses, Asynchronous Serial support. Interrupt driven I/O for real time performance. (Moxa includes the DB9 male cable)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIMOXACS-MX-CP118UMOXA CP-118U: PCI - 8 RS232/RS422/RS485 ports, data rates up to 921.6Kbps, modem control signals, 3.3V & 5V PCI buses, Asynchronous Serial support. Interrupt driven I/O for real time performance. (Requires purchase of additional cable.)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIMOXACS-MX-CP118U-25MOXA CP-118U & Add-on DB25 cable: PCI - 8 RS232/RS422/RS485 ports, data rates up to 921.6Kbps, modem control signals, 3.3V & 5V PCI buses, Asynchronous Serial support. Interrupt driven I/O for real time performance. (Includes DB25 cable CS-MX-CBL-M25x8)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIMOXACS-MX-CP118U-9MOXA CP-118U & Add-on DB9 cable: PCI - 8 RS232/RS422/RS485 ports, data rates up to 921.6Kbps, modem control signals, 3.3V & 5V PCI buses, Asynchronous Serial support. Interrupt driven I/O for real time performance. (Includes DB9 cable CS-MX-CBL-M9x8)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIMOXACS-MX-CP118U-IMOXA CP-118U-I: (Isolated) PCI - 8 RS232/RS422/RS485 ports with 2KV Optical Isolation, data rates up to 921.6Kbps, modem control signals, 3.3V & 5V PCI buses, Asynchronous Serial support. Interrupt driven I/O for real time performance. (Requires purchase of additional cable.)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIMOXACS-MX-CP118U-I-25MOXA CP-118U-I & Add-on DB25 cable: (Isolated) PCI - 8 RS232/RS422/RS485 ports with 2KV Optical Isolation, data rates up to 921.6Kbps, modem control signals, 3.3V & 5V PCI buses, Asynchronous Serial support. Interrupt driven I/O for real time performance. (Includes DB25 cable CS-MX-CBL-M7825x8)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIMOXACS-MX-CP118U-I-9MOXA CP-118U-I & Add-on DB9 cable: (Isolated) PCI - 8 RS232/RS422/RS485 ports with 2KV Optical Isolation, data rates up to 921.6Kbps, modem control signals, 3.3V & 5V PCI buses, Asynchronous Serial support. Interrupt driven I/O for real time performance. (Includes DB9 cable CS-MX-CBL-M78x8)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIMOXACS-MX-CP132EL-9MOXA CP-132EL-I-DB9M : 2-port RS-422/485 low profile PCIe x1 serial board with optical isolation (includes DB9 male cable), data rates up to 921.6Kbps, 128-byte FIFO and on-chip S/W flow control Interrupt driven I/O for real time performance. (Moxa includes the DB9 male cable)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIMOXACS-MX-CP134U-25MOXA CP-134U-DB25M : PCI - 4 RS232/RS422/RS485 ports, data rates up to 921.6Kbps, modem control signals, 3.3V & 5V PCI buses, Asynchronous Serial support. Only ports 1 and 2 support RS232 communication. Interrupt driven I/O for real time performance. (Moxa includes the DB25 male cable)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIMOXACS-MX-CP134U-9MOXA CP-134U-DB9M : PCI - 4 RS232/RS422/RS485 ports, data rates up to 921.6Kbps, modem control signals, 3.3V & 5V PCI buses, Asynchronous Serial support. Only ports 1 and 2 support RS232 communication. Interrupt driven I/O for real time performance. (Moxa includes the DB9 male cable)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIMOXACS-MX-CP134U-I-25MOXA CP-134U-I-DB25M: (Isolated) PCI - 4 RS232/RS422/RS485 ports with 2KV Optical Isolation, data rates up to 921.6Kbps, modem control signals, 3.3V & 5V PCI buses, Asynchronous Serial support. Only ports 1 and 2 support RS232 communication. Interrupt driven I/O for real time performance. (Includes DB25 male cable)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     PCIMOXACS-MX-CP134U-I-9MOXA CP-134U-I-DB9M : (Isolated) PCI - 4 RS232/RS422/RS485 ports with 2KV Optical Isolation, data rates up to 921.6Kbps, modem control signals, 3.3V & 5V PCI buses, Asynchronous Serial support. Only ports 1 and 2 support RS232 communication. Interrupt driven I/O for real time performance. (Includes DB9 male cable)Quotation from your salesman is required for SimWB support if a non-generic serial protocol is required. Please ask your salesman if a quotation is required.
     CableGeneral StdsCS-GS-C12-SIO4B-S312 foot Cable Non-Shielded w/ DB25 (Female) Connectors for the CS-GS-SIO4B-A4-64 Sync Serial Controler (CABLE12-SIO4B-STD3-DB25S)
     CableGeneral StdsCS-GS-C12-SIO8BX12 foot Cable Non-Shielded w/ DB25 (Female) Connectors for the CS-GS-SIO8BX2/SIO8BXS Family of Serial Controllers (CBL12-SIO8BXS-DB25S-RS530A )
     CableGeneral StdsCS-GS-C15-SIO4B-M1.5 foot Cable Non-Shielded w/ DB25 (Male) Connectors for the CS-GS-SIO4B Sync Serial Controller (CBL1.5-SIO4B-STD3-DB25P) Compatible with CS-GS-SIO4BX-XXX
     CableGeneral StdsCS-GS-C15-SIO4BX1.5 foot Cable Non-Shielded w/ DB25 (Female) Connectors for the CS-GS-SIO4BXx Sync Serial Controller (CBL1.5-SIO4B-STD3-DB25S)
     CableGeneral StdsCS-GS-C3-SIO4BX23 foot Cable Non-Shielded for the CS-GS-SIO4BX2 Serial Controller (GS p/n: CABLE3-PCIe-SIO4BX2)
     CableGeneral StdsCS-GS-C3-SIO4BX25P3 foot Cable Non-Shielded w/ DB25 Male Connectors for the CS-GS-SIO4BXx Sync Serial Controller (GS p/n: CABLE3-SIO4B-STD3-DB25P)
     CableGeneral StdsCS-GS-C3-SIO4BX25S3 foot Cable Non-Shielded w/ DB25 Female Connectors for the CS-GS-SIO4BXx Sync Serial Controller (GS p/n: CABLE3-SIO4B-STD3-DB25S)
     CableGeneral StdsCS-GS-C3-SIO8BX3 foot Cable Non-Shielded w/ DB25 (Female) Connectors for the CS-GS-SIO8BX2/SIO8BXS Family of Serial Controllers (CBL3-SIO8BXS-DB25S-RS530A )
     CableGeneral StdsCS-GS-C6-SIO4BX26 foot Cable Non-Shielded for the CS-GS-SIO4BX2 Serial Controller (GS p/n: CABLE6-PCIe-SIO4BX2)
     CableGeneral StdsCS-GS-C75-SIO8BXS7.5 foot Cable Non-Shielded w/ DB25 Female Connectors, RS530A Pinout for the CS-GS-SIO8BXx Serial Controler (CBL7.5-SIO8BXS-DB25S-RS530A )
     CableGeneral StdsCS-GS-C9-SIO4BX25P9 foot Cable Non-Shielded w/ DB25 Male Connectors for the CS-GS-SIO4BXx Sync Serial Controller (GS p/n: CABLE9-SIO4B-STD3-DB25P)
     CableGeneral StdsCS-GS-C9-SIO4BX25S9 foot Cable Non-Shielded w/ DB25 Female Connectors for the CS-GS-SIO4BXx Sync Serial Controller (GS p/n: CABLE9-SIO4B-STD3-DB25S)
     CableIntelCS-LP-BABY-LIN2USB LIN-Bus controller, integrated LPC-2136 (ARM-7 CPU ) with 256 Kbyte Flash and 32 KByte RAM. For Use with SIMulation Workbench Only - RIQ required for Stand-alone Use.
     CableMicrogateCS-MG-GT232-CCable Adapter: RS-232 DB-25 Male DTE 6ft. (Vendor p/n CMF000)
     CableMicrogateCS-MG-GTV35-CCable Adapter: V.35 Male DTE 6ft. V.35 standard uses a mix of single ended and differential signals on a 34 pin block connector (Vendor p/n 2534GT)
     CableMicrogateCS-MG-GTX-LPBGT4E - Low Profile Bracket
     CableMicrogateCS-MG-GTX21-CCable Adapter: X.21 is an interface standard using differential signals on a DB-15 connector. 6ft (Vendor p/n 2515FM)
     CableMOXACS-MX-CBL-M25x4MOXA CBL-M44M25x4-50 - Male DB44 to 4x Male DB25 Cable for the CS-MX-CP134U).
     CableMOXACS-MX-CBL-M25x8MOXA CBL-M62M25x8-100 - Male DB62 to 8x Male DB25 Cable for the CS-MX-CP118U.
     CableMOXACS-MX-CBL-M68M9x8MOXA CBL-M68M9x8-100 - Male DB68 to 8x Male DB9 Cable for the CS-MX-CP118EL-A.
     CableMOXACS-MX-CBL-M68x8MOXA CBL-M68M25x8-100 - Male DB68 to 8x Male DB25 Cable for the CS-MX-CP118EL-A.
     CableMOXACS-MX-CBL-M7825x8MOXA CBL-M78M25x8-100 -8-port connection cable (board-side: DB78 male x 1; device-side: DB25 male x 8), 100 cm. Cable for the CS-MX-CP118U-I & CS-MX-CP134U-I.
     CableMOXACS-MX-CBL-M78x8MOXA CBL-M78M9x8-100 -8-port connection cable (board-side: DB78 male x 1; device-side: DB9 male x 8), 100 cm. Cable for the CS-MX-CP118U-I & CS-MX-CP134U-I.
     CableMOXACS-MX-CBL-M9x4MOXA CBL-M44M9x4-50 - Male DB44 to 4x Male DB9 Cable for the CS-MX-CP114/134
     CableMOXACS-MX-CBL-M9x8MOXA CBL-M62M9x8-100 - Male DB62 to 8x Male DB9 Cable for the CS-MX-CP118U
     CableMOXACS-MX-OPT8-AMOXA OPT8A - DB62 male to DB62 male 150 cm connection cable for connecting to the serial board Includes VHDCI 68 to DB62 male, 150 cm connection Cable for the CS-MX-CP118U.
     CableMOXACS-MX-OPT8-A+MOXA OPT8A+ - VHDCI 68 to DB25 female x 8 RS-232 Connection Box Includes VHDCI 68 to DB62 male, 150 cm connection Cable for the CS-MX-CP118EL-x
     CableMOXACS-MX-OPT8-M9MOXA OPT8-M9 - DB62(M) to 8 x DB9(M) RS-232 Connection Box for the CS-MX-CP118U. Includes DB62 male to DB62 female 150 cm connection Cable for connecting to the serial board.
     AccessoryComtrolCS-CT-3c0030-4RocketPort Infinity 16 port DB9 Male Interface Panel. (Note: Used by the 16 and 32 Port RocketPort Infinity Devices CS-CT-30020-5 & CS-CT-30010-6.) Comtrol P/N 30030-4.
     AccessoryComtrolCS-CT-3c0040-3RocketPort Infinity 8 port DB9 Male Interface Panel. (Note: Used by the 8 Port RocketPort Infinity Device CS-CT-30020-5.) Comtrol P/N 30040-3
     AccessoryComtrolCS-CT-98295-1Comtrol RocketPort USB Serial Hub II - Serial adapter - Hi-Speed USB - RS-232 - serial - 4 ports
     AccessoryComtrolCS-CT-98296-8Comtrol RocketPort USB Serial Hub III - Serial adapter - USB - RS-232 - serial - 8 ports
     AccessoryComtrolCS-CT-99370-48-port RS232/422 DB25 Female External Universal Interface Connector Panel. For use with CS-CT-99365-0. (RoHS) (Replaces CS-CT-95050-9) NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.This item is is the replacement for the now obsolete CS-CT-95050-9) due to RoHS requirements.
     AccessoryComtrolCS-CT-99375-98-port RS232 External Universal Interface DB25 Female Connector Panel. For use with CS-CT-99365-0. (RoHS) (Replaces CS-CT-94050-0) NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.
     AccessoryComtrolCS-CT-99385-88-port RS232/422 DB25 Male External Universal Interface Connector Panel. For use with CS-CT-99365-0. (RoHS) (Replaces CS-CT-97050-7) NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.
     AccessoryComtrolCS-CT-P-99360-516-port RS232/422 DB25 Female External Universal Interface Connector Panel. For use with CS-CT-99355-1 (RoHS) (Replaces CS-CT-95100-1) NOTE: The Comtrol driver performs polling I/O only and as such, latencies of 30ms or more have been measured, Real-Time performance cannot be guaranteed.
    Synchro/ResolverPCIeNAICS-NA-79C3-K6-32NAII 79C3-K6K6Z0C0 PCIe Discrete 0-60V I/O: 32-channels, (500 mA – 2 A) (source/sink). 0ºC to +70ºC. Connections via 78-pin D-Sub panel connector. (This item has a 20 weeks vendor lead time)
     PCIeNAICS-NA-79C3-K6-48NAII 79C3-K6K6K6C0 PCIe Discrete 0-60V I/O: 48-channels, (500 mA – 2 A) (source/sink). 0ºC to +70ºC. Connections via 78-pin D-Sub panel connector. (This item has a 20 weeks vendor lead time)
     PCIeNAICS-NA-79G5-DRSD-64NAII 79G5-2-DRKDRKSD3C0 PCIe (x1), Half-Length, Multifunction I/O Board: 6 Channels Digital to Resolver, 2-28 VLL, 2-115 Vrms Exc, 1 KHz - 5 KHz Freq, .5 VA/Ch (Max); 4 Channels Synchro/Resolver to Digital, 2-28 Vrms Input, 2-115 Vrms Exc, 5 KHz - 10 KHz Freq . 0ºC to +70ºC. (This item has a extended vendor lead times of 35 weeks)
     PCINAICS-NA-76CS1-02-KG( **EOL** LAST TIME BUY, MAY 1st, 2017) NAII 76CS1-002CRA-KG PCI Full Size 0 Channel S/D 2-Channel D/S Resolver: 0° to 70°C, On-board Reference 2-28V, No Encoder/Commutation Option, KG= DR: 10VLL / 10Vref / 10KHz Frequency all channels. *Extended Lead Times 20 weeks.12 Weeks ARO. It is strongly suggested that you contact your salesman to ensure that this board will meet the requirements of your application.
     PCINAICS-NA-76CS1-06-CO( **EOL** LAST TIME BUY, MAY 1st, 2017) NAII 76CS1-006CRO-CO PCI Full Size 6-Channel Resolver Only: 3000 HZ @ 6 VRMS. *Extended Lead Times 20 weeks.
     PCINAICS-NA-76CS1-06-CP( **EOL** LAST TIME BUY, MAY 1st, 2017) NAII 76CS1-006CRO-CP PCI Full Size 6-Channel Resolver Only: 5400 HZ @ 5.5 VRMS. *Extended Lead Times 20 weeks.
     PCINAICS-NA-76CS1-22-KT( **EOL** LAST TIME BUY, MAY 1st, 2017) NAII 76CS1-022CRA-KT PCI Full Size 6-Channel Synchro/Resolver Combination Measurement and Simulation Motherboard: 2 S/D and 2 D/S channels, 0C to +70C, Resolver, 2-28VRMS Output, Without Encoder/Communation Option, R/D: 5.0VLL/7.07Vref/3.0KHz, Measurement & Simulation Channels are Resolver. *Extended Lead Times 20 weeks.
     PCINAICS-NA-76CS1-26-CO( **EOL** LAST TIME BUY, MAY 1st, 2017) NAII 76CS1-026CRA-C0 PCI Full Size 6-Channel Resolver two measurement channels, on-board reference signal 2-28VRMS Output: 3000 HZ @ 6 VRMS. *Extended Lead Times 20 weeks.
     PCINAICS-NA-76CS1-26-CP( **EOL** LAST TIME BUY, MAY 1st, 2017) NAII 76CS1-026CRA-CP PCI Full Size 6-Channel Resolver two measurement channels, on-board reference signal 2-28VRMS Output: 5400 HZ @ 5.4 VRMS. *Extended Lead Times 20 weeks.
     PCINAICS-NA-76CS1-40-HA( **EOL** LAST TIME BUY, MAY 1st, 2017) NAII 76CS1-040CRA-HA PCI Full Size 4-Channel Resolver to Digital, 0C to +70C, 2-28 VRMS output, Without Encoder/Commutation Option, RD: 3.0 VLL / 6.0 Vref / 5000 Hz Freq ; Power on default of optional REF supply 6.0 Vrms @ 5000 Hz
     PCINAICS-NA-76CS1-84-GV( **EOL** LAST TIME BUY, MAY 1st, 2017) NAII 76CS1-084CRA-GV PCI Full SizeSynchro device, 8-S/D Measurement Input Channels, 4-D/S Synchro Output Channels, Resolver, 2-28VRMS Output, 2.69KHz Excitation Frequency, Card configured for Synchro, 0C to +70C, without conformal coating. *Extended Lead Times 20 weeks.
     PCINAICS-NA-76CS1-86-GV( **EOL** LAST TIME BUY, MAY 1st, 2017) NAII 76CS1-086CSA-GV PCI Full SizeSynchro device, 8-S/D Measurement Input Channels, 6-D/S Synchro Output Channels, 2-28VRMS Excitation Output, 2.69KHz Excitation Frequency. *Extended Lead Times 20 weeks.
     PCINAICS-NA-76CS3-04-SHNAII 76CS3-SHW3Z0Z0Z00C00 (not supported by SImWB)PCI Full Size D/S, S/D, LVDT Simulation/Measurement and Multifunction I/O Board. 4 Channels Prog Syn/Rsl To Dig, 90 VL-L, 115 Vrms, 50-400Hz, 1 Channel 28-115 Vrms Output, 47-20K Hz, Programmable, 6VA. *Extended Lead Times 20 weeks.
    WaveformVMEHighlandCS-HT-V370(EOL - No Long Available) - Use CS-HT-V375) 4-channel Arbitrary Waveform Generator VME card (HT-V370)
     VMEHighlandCS-HT-V3754-channel Arbitrary Waveform Generator w/ burst mode (HT-V375)